内蒙古碾子沟钼矿床成矿流体来源、演化及成矿机理     

孙丰月  王睿  王一存  李顺达  王可勇  石开拓  孙清飞  王文元 《吉林大学学报(地球科学版)》2020,50(3):768-780

内蒙古自治区碾子沟钼矿床地处华北地台北缘西拉木伦钼成矿带西段，为一典型的中型石英脉型钼矿床。该钼矿床矿脉（体）主要产于燕山早期二长花岗岩-钾长花岗岩内NNW、NW向断裂构造体系之中，成矿作用过程经历了黄铁矿±辉钼矿＋石英（Ⅰ）、辉钼矿＋黄铁矿±黄铜矿＋石英（Ⅱ）、黄铜矿＋黄铁矿±闪锌矿＋石英（Ⅲ）及石英±方解石（Ⅳ）4个阶段。系统的流体包裹体岩相学、包裹体组分析、包裹体显微测温研究表明，矿床初始成矿流体为高温、中低盐度（490~550℃，盐度（w（NaC1））2%~10%，50~62 MPa）均匀的NaCl-H₂O体系热液，δ¹⁸O_H2O-SMOW（2.21‰）及δD_H2O-SMOW（-68.9‰）表明其主要来源于岩浆热液；成矿流体上升并不断汇聚于容矿断裂空间，伴随温度、压力降低（380~460℃，26~40 MPa→360~420℃，25~30 MPa）而进入两相不混溶区，流体开始发生沸腾→强烈沸腾作用，导致成矿元素Mo大量沉淀富集成矿，成矿晚期残余流体与大气降水混合（δ¹⁸O_H2O-SMOW为-2.41‰~2.51‰，δD_H2O-SMOW为-110.1‰~-105.5‰），矿床属燕山早期中高温岩浆热液型钼矿床。  相似文献   

晋北煅烧高岭土用煤矸石的应用矿物学特征   总被引：1，自引：0，他引：1  

侯龙超  王哲皓  汪灵  周东晓 《矿物学报》2020,(2):149-154

为了给晋北煅烧高岭土用煤矸石的评价和开发利用提供科学依据,采用XRD、XRF、SEM和白度计等现代分析测试技术,研究了晋北煅烧高岭土用煤矸石的应用矿物学特征。结果表明:1)根据造纸和涂料用煅烧高岭土的国家标准,晋北煤矸石主要可分为3种类型:合格原料、基本合格原料和不合格原料。2)与合格和基本合格原料相比,不合格原料煅烧产物的化学成分中SiO2、Al2O3、Fe2O3含量以及碱金属与碱土金属总含量都与前者有较大差异。3)合格和基本合格原料主要由高岭石(85%~94%)组成,不合格煤矸石矿物组合为高岭石(30%~60%)+石英(23%~38%)+伊利石(14%~26%),并含少量黄铁矿和白云石等杂质矿物,石英等杂质矿物和含铁矿物是分别导致煅烧产物化学成分和白度不合格的主要原因。4)合格原料中高岭石结晶度较好,主要为不规则片状、书册状和弯曲片状,片表面光滑,片径大小范围较大,为0.05~51.22μm,平均2.80μm,径厚比41.24。  相似文献   

西藏弄如日金矿床花岗斑岩年代学与岩石成因   总被引：1，自引：1，他引：0  

钟婉婷  多吉  李明礼  黄勇  黄瀚霄  李光明  张林奎  董随亮 《岩石学报》2019,35(3):913-933

弄如日矿区发育中新世浅成花岗闪长斑岩和二长花岗斑岩两类岩体,本文对这两类花岗斑岩体进行了LA-ICPMS锆石U-Pb定年和系统的岩体地质、岩石学和元素地球化学研究。结果显示,花岗闪长斑岩和二长花岗斑岩近于同期侵入,前者为未分异或弱分异花岗岩,后者为高分异花岗岩。花岗闪长斑岩和二长花岗斑岩的侵位年龄测试结果表明,前者形成时代为20. 3±0. 8Ma,后者形成于20. 20±0. 41Ma～20. 51±0. 52Ma。花岗闪长斑岩具有低硅、低钾、低碱、高铝的特点,SiO_2介于63. 37%～66. 78%之间,Al2O3变化于15. 14%～16. 04%,Na_2O+K_2O=4. 46%～5. 33%,A/CNK=1. 13～1. 26,稀土总量高,重稀土和Y含量低,具有埃达克质岩石的地球化学特点,主体为Ⅰ型花岗岩。二长花岗斑岩具有高硅、高钾、高碱、低铝、稀土总量低的特点,SiO_2=70. 46%～77. 17%,Al_2O_3=12. 22%～15. 06%,Na_2O+K_2O=7. 14%～7. 98%,A/CNK=1. 03～1. 21,稀土总量低,为Ⅰ型花岗岩。两种岩石稀土元素分配典线呈右倾型,均富集大离子亲石元素(Rb、Ba等),亏损高场强元素(Nb、Ta、Zr);此外,花岗闪长斑岩轻重稀土分馏明显,而二长花岗斑岩中稀土和重稀土分馏不明显。花岗闪长斑岩形成于弄如日矿区加厚下地壳中变基性岩的部分熔融,变基性岩很可能是榴辉岩(可能含有角闪石),部分熔融后的残留物以石榴石为主,含金红石。二长花岗斑岩可能是由花岗闪长斑岩浆通过分离结晶衍生而来,分离结晶的矿物包括斜长石、黑云母、钾长石、钛铁矿、榍石、磷灰石等。综合研究表明,弄如日金矿成矿时代略晚于花岗闪长斑岩侵位,成矿与花岗闪长斑岩及其分异的二长花岗斑岩关系密切。花岗闪长斑岩及二长花岗斑岩的侵位时代及成因研究,对揭示弄如日金矿矿床成因有重要意义,也为区域寻找该类矿床指明了方向。  相似文献   

江西东坪石英脉型黑钨矿矿床地质特征、控矿因素及找矿标志     

杨细浩  胡文洁  钟起泓  朱昌杰  万欢  胡正华 《吉林大学学报(地球科学版)》2019,49(5):1301-1316

东坪钨矿床是近年在赣北地区新发现的首个超大型石英脉型黑钨矿矿床，位于长江中下游成矿带幕阜山地区东坪-香炉山钨矿找矿远景区东部。矿床赋矿层位为新元古代双桥山群安乐林组浅变质岩系，北东向断裂及其两侧的次级裂隙为区内主要控矿构造、容矿构造，隐伏的燕山晚期黑云母二长花岗岩为成矿岩体，与区内钨多金属成矿关系密切的为石英脉状硅化；两个矿带的钨矿体均产于成矿岩体外接触带，呈现了石英脉型黑钨矿矿床典型的"五层楼"分带特征，矿石工业类型主要为黑钨矿矿石；明确了构造和岩浆岩等主要控矿因素；总结出地表微细裂隙云英岩化-黄铁矿化蚀变带、含硫化物石英细脉带、石英脉、重砂及地球化学异常为区内主要找矿标志。  相似文献   

Relationship Between Electrical Properties and Sedimentary Environment of the Longmaxi Formation Shale, Southern Sichuan     

YANG Kai  ZHANG Bing  WANG Xuben  HE Lanfang  YANG Hongyu  WANG Pengwan  TANG Jialin  DENG Jixin  ZHANG Cong 《《地质学报》英文版》2020,94(5):1531-1546

The Lower Silurian Longmaxi Formation in the south of Sichuan is a key player in the exploration and development of shale gas in China. Due to a highly complex topographic area, electromagnetic methods (EM) become important exploration means in this area. Many studies have been conducted on the shale mineral composition and electrical properties of shale, however, the correlation between sedimentary environments and the electrical properties of shale remain poorly understood. The electrical properties and sedimentary environment of the organic-rich shale of the Longmaxi Formation have been studied by means of X-ray diffraction, organic geochemistry, scanning electron microscopy and complex resistivity measurements. The discovered high quartz content of the Longmaxi Formation shale results in low resistivity. Deep-water shelf biogenic quartz contributes lower resistivity more than that of shallow-water terrigenous quartz. The deep-water anoxic and organic sedimentary environment led to major enrichment of pyrite, leading to a high polarization effect in shale. We present the correlation between the lithofacies types and electrical properties of Longmaxi Formation. The mixed siliceous shale lithofacies is the most favorable among the three lithofacies, which is characterized by high total organic carbon (TOC) content, high brittleness mineral content, high polarization and low resistivity (“three high and one low”). This feature is an effective identification of shale gas reservoirs by electromagnetic prospecting. Our study can provide constraints on electrical parameters of rocks for electromagnetic “sweet spot” exploration of shale gas, and so this has important geological significance to shale gas exploration and development.  相似文献   

Ore Genesis and Tectonic Significance of the Xiaojiashan Tungsten Deposit,Eastern Tianshan,Xinjiang, China: Evidence from Geology,Fluid Inclusions,and Stable Isotope Geochemistry     

Yunfei Zhou  Jiuhua Xu  Lihua Shan  Xihui Cheng  Yueping Deng  Wenhuan Feng  Lingxiao Qiao 《Resource Geology》2019,69(1):43-64

The Xiaojiashan tungsten deposit is located about 200 km northwest of Hami City, the Eastern Tianshan orogenic belt, Xinjiang, northwestern China, and is a quartz vein‐type tungsten deposit. Combined fluid inclusion microthermometry, host rock geochemistry, and H–O isotopic compositions are used to constrain the ore genesis and tectonic setting of the Xiaojiashan tungsten deposit. The orebodies occur in granite intrusions adjacent to the metamorphic crystal tuff, which consists of the second lithological section of the first Sub‐Formation of the Dananhu Formation (D₂d ₁²). Biotite granite is the most widely distributed intrusive bodies in the Xiaojiashan tungsten deposit. Altered diorite and metamorphic crystal tuff are the main surrounding rocks. The granite belongs to peraluminous A‐type granite with high potassic calc‐alkaline series, and all rocks show light Rare Earth Element (REE)‐enriched patterns. The trace element characters suggest that crystallization differentiation might even occur in the diagenetic process. The granite belongs to postcollisional extension granite, and the rocks formed in an extensional tectonic environment, which might result from magma activity in such an extensional tectonic environment. Tungsten‐bearing quartz veins are divided into gray quartz vein and white quartz veins. Based on petrography observation, fluid inclusions in both kinds of vein quartz are mainly aqueous inclusions. Microthermometry shows that gray quartz veins have 143–354°C of T_h, and white quartz veins have 154–312°C of T_h. The laser‐Raman test shows that CO₂ is found in fluid inclusions of the tungsten‐bearing quartz veins. Quadrupole mass spectrometry reveals that fluid inclusions contain major vapor‐phase contents of CO₂, H₂O. Meanwhile, fluid inclusions contain major liquid‐phase contents of Cl^?, Na⁺. It can be speculated that the ore‐forming fluid of the Xiaojiashan tungsten deposit is characterized by an H₂O–CO₂, low salinity, and H₂O–CO₂–NaCl system. The range of hydrogen and oxygen isotope compositions indicated that the ore‐forming fluids of the tungsten deposit were mainly magmatic water. The ore‐forming age of the Xiaojiashan deposit should to be ~227 Ma. During the ore‐forming process, the magmatic water had separated from magmatic intrusions, and the ore‐bearing complex was taken to a portion where tungsten‐bearing ores could be mineralized. The magmatic fluid was mixed by meteoric water in the late stage.  相似文献   

长江三角洲全新世沉积物光释光测年研究          下载免费PDF全文

申江  常华进  曹广超  刘洪舟 《盐湖研究》2020,28(4):29-40

长江三角洲是研究古海岸沉积环境演化的理想区域。选取长江三角洲平原一支长岩芯钻孔上部55 m层位的沉积物进行光释光(optically stimulated luminescence,OSL)测年研究。根据沉积物粒度特性,在实验前处理过程中,提取100~200 μm或63~100 μm粗颗粒石英矿物进行OSL测年。测年样品的预热坪与剂量恢复实验表明选择180℃作为预热条件较为合适,石英OSL信号衰退曲线以快组分为主。条件实验结果、等效剂量分布以及各测片的循环比、热转移等方法学层面的实验结果表明,OSL测年技术对该孔的沉积物测年具有适应性和可靠性。通过年代—深度关系模型,建立该段地层中全新世以来的年龄框架。依据该孔的年代地层序列并结合前人工作,探讨全新世以来长江三角洲的沉积演化。  相似文献   

A multi‐method approach to dating the burial and skeleton of Kiacatoo Man,New South Wales,Australia     

Timothy Pietsch  Justine Kemp  Colin Pardoe  Rainer Grün  Jon Olley  Rachel Wood 《第四纪科学杂志》2019,34(8):662-673

Kiacatoo Man, a large, rugged Aboriginal adult buried in the Lachlan riverine plains of southeastern Australia, was discovered in 2011. Laser‐ablation uranium series analysis on bone yielded a minimum age for the burial of 27.4 ± 0.4 ka (2σ). Single‐grain, optically stimulated luminescence ages on quartz sediment in which the grave had been dug gave a weighted mean age of 26.4 ± 1.5 ka (1σ). Luminescence samples from the grave infill and from sediment beneath the grave exhibit overdispersed dose distributions consistent with bioturbation or other disturbance, which has obscured the burial signal. The overlap between the minimum (U‐series) and maximum (luminescence) ages places the burial between 27.0 and 29.4 ka (2σ). Luminescence ages obtained from the channel belt of between 28 ± 2 and 25 ± 3 ka indicate that fluvial sedimentation was occurring before the Last Glacial Maximum, which is consistent with the broader geomorphic setting. Together, these results are internally and regionally consistent, and indicate that Kiacatoo Man was one of the more ancient individuals so far identified in Australia. His remains are important to our understanding of patterns of biological variation and other processes that have shaped people in the Murray‐Darling Basin through time. Copyright © 2019 John Wiley & Sons, Ltd.  相似文献   

The 1‐million‐year‐old quartz assemblage from Pont‐de‐Lavaud (Centre,France) in the European context          下载免费PDF全文

Jackie Despriée  Marie‐Hélène Moncel  Marta Arzarello  Gilles Courcimault  Pierre Voinchet  Jean‐Jacques Bahain  Christophe Falguères 《第四纪科学杂志》2018,33(6):639-661

  相似文献   

Concealed porphyry delineation based on nonlinear three-dimensional density-difference inversion: An example in the Beiya mine area,Western Yunnan,China     

《China Geology》2019,2(3):342-353

Intermediate acid-complex rock masses with low-density characteristics are the most important prospecting sign in the Beiya area, of western Yunnan province, and provide a physical basis for good gravity exploration. It is usually difficult to obtaining solutions in connection with actual geological situations due to the ambiguity of the conventional gravity-processing results and lack of deep constraints. Thus, the three-dimensional (3D) inversion technology is considered as the main channel for reducing the number of solutions and improving the vertical resolution at the current stage. The current study starts from a model test and performs nonlinear 3D density-difference inversion called “model likelihood exploration”, which performs 3D inversion imaging and inversion of the known model while considering the topographic effects. The inversion results are highly consistent with those of the known models. Simultaneously, we consider the Beiya gold mine in Yunnan as an example. The nonlinear 3D density-difference inversion technology, which is restricted by geological information, is explored to obtain the 3D density body structure below 5 km in the mine area, and the 3D structure of the deep and concealed rock masses are obtained using the density constraints of the intermediate-acid-complex rock masses. The results are well consistent with the surface geological masses and drilling-controlled deep geological masses. The model test and examples both show that the 3D density-difference nonlinear inversion technology can reduce inversion ambiguity, improve resolution, optimize the inversion results, and realize “transparency” in deeply concealed rock masses in ore-concentrated areas,which is useful in guiding the deep ore prospecting.  相似文献