南海北部西沙海槽沉积物管状黄铁矿特征及其形成机理^*          下载免费PDF全文

石思思  吴朝东  梁金强  王熠哲  叶云涛  方允鑫  马健  翟俪娜 《古地理学报》2020,22(1):175-192

南海北部西沙海槽S1站位的岩心柱沉积物中广泛发育自生矿物黄铁矿,其形态以管状为主,且具有内部中空的圈层结构。使用扫描电镜、电子探针、LA-ICP-MS、SIMS等测试方法研究了管状黄铁矿的形态及圈层结构,结果显示: (1)管状黄铁矿发育内部中空的圈层结构,其中内圈层(I_py)由莓球状黄铁矿呈五角十二面体紧密堆积组成,外圈层(O_py)由晶形较好晶粒较大的八面体黄铁矿组成,并混有沉积碎屑及钙质生物壳体;(2)内圈层和外圈层分别呈现出贫S富Fe和富S贫Fe的特征,其成因是甲烷渗漏造成的局部还原环境使得As进入黄铁矿中导致晶格空缺或被扭曲,从而促进Ni、Co、Cu、Zn、Pb等微量元素的掺入;(3)内圈层、外圈层发生了明显的硫同位素分馏现象,内圈层中 δ³⁴S 平均为-37.8‰,外圈层中 δ³⁴S 平均为-29.3‰。研究认为,管状黄铁矿作为曾经甲烷渗漏的通道,其生长机制可分为3个阶段: (1)气水通道形成阶段: 向上运移的甲烷流体在沉积物孔隙中逐渐形成气水通道;(2)外圈层形成阶段: 当向上运移的甲烷与硫酸盐发生甲烷厌氧氧化时,逐渐形成晶体较大、晶形较好的八面体黄铁矿外圈层;(3)内圈层形成阶段: 随着甲烷浓度逐渐降低,在气水通道中的微生物作用下,剩余甲烷与向下运移的硫酸盐继续反应形成莓球状黄铁矿内圈层。因此,南海北部的泥岩中大量发育的管状黄铁矿常常与地层中甲烷水合物的存在有关。  相似文献   

开挖前降水引发基坑变形机制模型试验研究     

曾超峰  薛秀丽  宋伟炜  李淼坤  白宁 《岩土力学》2020,41(9):2963-2972

现有基坑相关研究主要关注土方开挖过程引起的变形，认为围护结构变形起点是土方第1次开挖。然而，一些工程实测表明，基坑开挖前降水阶段即可引起围护结构及周边地层发生厘米级的变形。显然，未考虑开挖前变形的基坑监测数据将低估基坑施工的环境效应。为了研究基坑开挖前降水引发基坑变形的机制，开展了室内模型试验，对基坑开挖前降水过程进行了缩尺精细化模拟。通过微型降水井的设置与调控，模型试验真实再现了实际基坑降水过程中井流效应对围护结构受力变形的影响。试验过程中发现，随着降水的进行，坑外降水漏斗不断扩展，围护结构悬臂式侧移及坑外拱肩式地面沉降也随之产生。另外，降水导致墙前水压力明显减小，并诱发墙前侧向总压力重分布（以减小为主），围护结构为此发生指向坑内的悬臂式运动以寻求新的受力平衡，并通过墙后土体损失诱发坑外地层变形。  相似文献   

极端条件下心墙泥浆料的渗透反滤试验研究     

左永振  赵娜 《岩土力学》2020,41(2):520-526

高土石心墙坝的渗透稳定性在很大程度上依赖于反滤层对心墙料的反滤保护作用。心墙在大坝蓄水和长期运行的条件下，要经历复杂的填筑加载、浸水饱和与水荷载的作用，在差异沉降、复杂结构应力作用、水力劈裂和渗透水流作用下，心墙一旦出现裂缝，其渗透稳定性及反滤层的保护作用就将面临严峻的考验。针对这一问题，设计了专门非常规的抛填土料反滤试验和泥浆渗透反滤试验，模拟心墙裂缝条件下其颗粒被冲刷起动后，被反滤料阻挡和淤积过程。试验结果表明，心墙料和反滤料满足反滤准则条件下，心墙颗粒被拦截和淤积在反滤层上游表面，反滤料能有效防止心墙颗粒的流失，反滤层在极端条件下对心墙料仍能起到有效的反滤保护作用。  相似文献   

Robust numerical implementation of a 3D rate-dependent model for reservoir geomechanical simulations     

Giovanni Isotton  Pietro Teatini  Massimiliano Ferronato  Carlo Janna  Nicolò Spiezia  Stefano Mantica  Giorgio Volonte 《国际地质力学数值与分析法杂志》2019,43(18):2752-2771

A 3D elasto-plastic rate-dependent model for rock mechanics is formulated and implemented into a Finite Element (FE) numerical code. The model is based on the approach proposed by Vermeer and Neher (A soft soil model that accounts for creep. In: Proceedings of the International Symposium “Beyond 2000 in Computational Geotechnics,” pages 249-261, 1999). An original strain-driven algorithm with an Inexact Newton iterative scheme is used to compute the state variables for a given strain increment.The model is validated against laboratory measurements, checked on a simplified test case, and used to simulate land subsidence due to groundwater and hydrocarbon production. The numerical results prove computationally effective and robust, thus allowing for the use of the model on real complex geological settings.  相似文献   

70年来中国化学海洋学研究的主要进展   总被引：5，自引：3，他引：2  

宋金明  王启栋  张润  陈建芳  陈敏  徐忠胜 《海洋学报》2019,41(10):65-80

我国的海洋化学工作者通过70年来，特别是近30年来的化学海洋学研究，实现了我国与世界先进水平进入同步发展的快车道，其显著的特点是:(1)化学海洋学研究从元素地球化学分布系统转向了以揭示深层次海洋生物地球化学过程为核心的研究；(2)化学海洋学研究实现了多领域、多视点的综合交叉研究；(3)更加关注了人为影响与自然变化共同作用下的海洋生态环境变化研究，对近海和海岸带而言，更加注重从海陆统筹一体化角度探析化学物质的分布迁移特征。本文从生源要素的海洋生物地球化学过程、微/痕量元素与同位素的海洋化学研究、生物过程作用下的化学海洋学过程等角度，重点总结归纳和分析了30年来我国海洋化学研究的重要进展和发展状况，以期对化学海洋学的进一步研究提供借鉴和启迪。  相似文献   

新疆别也萨麻斯矿区钽锰矿的矿物学特征及其TIMS U-Pb定年     

何晗晗  艾尔肯&#;吐尔孙  王登红  王瑞江  陈振宇 《岩矿测试》2020,39(4):609-619

钽矿是我国的紧缺资源,近年来对别也萨麻斯地区钽矿取得了找矿新进展,包括新矿点的发现以及花岗伟晶岩型稀有金属资源的找矿突破。区内伟晶岩脉广泛发育,为探究含矿脉体的成矿时代、查明区内典型铌钽矿物的矿物学特征,本文以L18号伟晶岩脉中的钽锰矿为研究对象,对其物理性质、化学成分、地质年代等进行了分析。应用电子探针测试钽锰矿的化学组成,热电离质谱法(TIMS)测定其U-Pb年龄,确定含矿脉体的形成年代。结果表明,研究区钽锰矿中Ta_2O_5含量为51.58%～74.80%,均值68.49%,Nb_2O_5含量为6.15%～27.63%;部分主量元素分布不均,未表现出规律的分带性,但矿物颗粒中心部位的CaO含量较边部低,横剖面上SiO_2含量相对稳定,TiO_2与WO_3显示不规律波动。这种特征表明钽锰矿并非单纯由结晶分异作用形成,而是可能受到了后期交代作用的影响。钽锰矿的U-Pb年龄为160Ma,说明钽锰矿化发生于晚侏罗世早期,与围岩海西期二云母花岗岩相差甚远,后者并非L18号脉体的成矿母岩。  相似文献   

Anthropogenic impact in the Maya Lowlands of Petén,Guatemala, during the last 5500 years          下载免费PDF全文

D. Battistel  M. Roman  A. Marchetti  N. M. Kehrwald  M. Radaelli  E. Balliana  G. Toscano  C. Barbante 《第四纪科学杂志》2018,33(2):166-176

  相似文献   

Permanent earthquake‐induced actions in buried pipelines: Numerical modeling and experimental verification     

《地震工程与结构动力学》2018,47(4):966-987

Buried pipelines are often constructed in seismic and other geohazard areas, where severe ground deformations may induce severe strains in the pipeline. Calculation of those strains is essential for assessing pipeline integrity, and therefore, the development of efficient models accounting for soil‐pipe interaction is required. The present paper is aiming at developing efficient tools for calculating ground‐induced deformation on buried pipelines, often triggered by earthquake action, in the form of fault rupture, liquefaction‐induced lateral spreading, soil subsidence, or landslide. Soil‐pipe interaction is investigated by using advanced numerical tools, which employ solid elements for the soil, shell elements for the pipe, and account for soil‐pipe interaction, supported by large‐scale experiments. Soil‐pipe interaction in axial and transverse directions is evaluated first, using results from special‐purpose experiments and finite element simulations. The comparison between experimental and numerical results offers valuable information on key material parameters, necessary for accurate simulation of soil‐pipe interaction. Furthermore, reference is made to relevant provisions of design recommendations. Using the finite element models, calibrated from these experiments, pipeline performance at seismic‐fault crossings is analyzed, emphasizing on soil‐pipe interaction effects in the axial direction. The second part refers to full‐scale experiments, performed on a unique testing device. These experiments are modeled with the finite element tools to verify their efficiency in simulating soil‐pipe response under landslide or strike‐slip fault movement. The large‐scale experimental results compare very well with the numerical predictions, verifying the capability of the finite element models for accurate prediction of pipeline response under permanent earthquake‐induced ground deformations.  相似文献   

Using the applied element method for modelling calcium silicate brick masonry subjected to in‐plane cyclic loading     

Daniele Malomo  Rui Pinho  Andrea Penna 《地震工程与结构动力学》2018,47(7):1610-1630

The response of calcium silicate unreinforced masonry construction to horizontal cyclic loading has recently become the focus of experimental and numerical research, given its extensive use in some areas of the world that are now exposed to induced earthquakes (eg, north of the Netherlands). To assess the seismic behaviour of such construction, a relatively wide range of modelling methodologies are available, amongst which the discrete elements approach, which takes into account the intrinsic heterogeneity of a brick‐mortar assembly, can probably be deemed as the most appropriate computational procedure. On the other hand, however, since discrete elements numerical methods are based on a discontinuum domain, often they are not able to model every stage of the structural response adequately, and because of the high computational burden required, the analysis scale should be chosen carefully. The applied element method is a relatively recent addition to the discrete elements family, with a high potential for overcoming the aforementioned limitations or difficulties. Initially conceived to model blast events and concrete structures, its use in the earthquake engineering field is, of late, increasing noticeably. In this paper, the use of the applied element method to model the in‐plane cyclic response of calcium silicate masonry walls is discussed and scrutinised, also through the comparison with experimental results of in‐plane cyclic shear‐compression tests on unreinforced masonry walls.  相似文献   

地理大数据挖掘——目标、内涵与研究问题     

裴韬  宋辞  郭思慧  舒华  刘亚溪  杜云艳  马廷  周成虎 《地理学报(英文版)》2020,30(2):251-266

  相似文献