A 3D finite element simulation model for TBM tunnelling in soft ground     

Thomas Kasper  Günther Meschke 《国际地质力学数值与分析法杂志》2004,28(14):1441-1460

  相似文献   

Reliability assessment of serviceability performance of braced retaining walls using a neural network approach     

A. T. C. Goh  F. H. Kulhawy 《国际地质力学数值与分析法杂志》2005,29(6):627-642

In urban environments, one major concern with deep excavations in soft clay is the potentially large ground deformations in and around the excavation. Excessive movements can damage adjacent buildings and utilities. There are many uncertainties associated with the calculation of the ultimate or serviceability performance of a braced excavation system. These include the variabilities of the loadings, geotechnical soil properties, and engineering and geometrical properties of the wall. A risk‐based approach to serviceability performance failure is necessary to incorporate systematically the uncertainties associated with the various design parameters. This paper demonstrates the use of an integrated neural network–reliability method to assess the risk of serviceability failure through the calculation of the reliability index. By first performing a series of parametric studies using the finite element method and then approximating the non‐linear limit state surface (the boundary separating the safe and ‘failure’ domains) through a neural network model, the reliability index can be determined with the aid of a spreadsheet. Two illustrative examples are presented to show how the serviceability performance for braced excavation problems can be assessed using the reliability index. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

An experimental method for determining the frequency-dependent added mass and added mass moment of inertia for a floating body in heave and pitch motions     

Jong-Shyong Wu  Mang Hsieh   《Ocean Engineering》2001,28(4):528

Most of the existing relevant materials have been obtained from experiments, in which evaluating the added mass at the resonant frequency corresponding to the peak of a frequency-response curve obtained from the “forced” vibration analysis is the most popular technique. In this paper, a simple experimental method was presented where the “free” vibration responses instead of the “forced” ones were used to determine the values of m_ah and I_ap. The main part of the experimental system is composed of a floating body (model) and a spring–shaft shaker. The “free” vibration of this main part was induced by imposing on it an initial displacement (and/or an initial velocity), and from the time histories of displacements information such as the “damped” natural frequencies, damping ratios, sectional added mass coefficients (C_V and C_P) were obtained. Since the displacements of the spring–shaft shaker are “translational” and those of the floating body due to pitch motions are “angular”, a technique for the transformation between the associated parameters of the two components of the main part was presented.  相似文献   

思林水电站通航建筑物高边坡稳定分析和评价     

徐力群  沈振中  俞凯加  吕军 《岩土力学》2008,29(Z1):42-46

应用ANSYS结构分析软件,模拟了思林水电站通航建筑物高边坡的地形、地质条件以及开挖的过程,建立边坡开挖的有限元计算分析模型,分析边坡在自然状态、分级开挖以及锚杆支护加固等工况下的应力、变形及其整体稳定性.定义单元的局部安全系数,得到了边坡开挖加固后稳定安全系数的分布.根据计算成果,指出现设计加固措施可以保证边坡稳定,无需增加其他工程措施.  相似文献   

相控建模技术在羊二庄油田的应用   总被引：1，自引：0，他引：1       下载免费PDF全文

冯国杰  向赞  刘存林 《地质找矿论丛》2008,23(3):240-244

羊二庄油田的明馆储层非均质性严重,高含水、高开发后期的剩余油分布比较复杂,第一次油藏描述中应用传统的确定性建模方法已经不能满足剩余油挖潜的需要.采用RMS相控建模软件,通过构造建模、沉积微相建模、储层物性建模,建立羊二庄油田三维可视化相控地质模型,并实现了与数模软件的无缝接口.  相似文献   

南京某深基坑边坡支护设计与施工   总被引：3，自引：0，他引：3  

王晶  卢俊  谭跃虎 《岩土工程技术》2008,22(3):152-154,159

南京某深基坑周边环境较为复杂,地下水丰富,基坑开挖较深,最深处达13m。根据周边环境的情况和开挖的深度,采用了钻孔灌注桩和土钉锚杆相结合的支护形式。分析了该基坑施工的技术要点,通过监测结果,说明该支护方案是可行的。  相似文献   

倒Y形竖井联系测量   总被引：1，自引：0，他引：1  

曾燕  王利群  唐记城 《现代测绘》2008,31(3)

介绍在小直径竖井联系测量中取消联系三角形,改用单根钢丝定点,全站仪引测高程的施测方法。  相似文献   

密集建筑群中的深基坑施工技术     

张维正 《探矿工程》2006,33(6):1-3,7

以沈阳市某深基坑支护及降水工程在密集建筑群中施工为例，介绍了该支护工程的设计与施工，阐述了该工程变形监测方法并对其结果进行了分析，总结了在沈阳地区密集建筑群中进行基坑开挖的设计与施工经验。  相似文献   

大变形有限元法分析边坡稳定性     

杨涛  周德培  苏金蓉 《山地学报》2006,24(1):101-104

边坡稳定性分析的重要任务是确定边坡潜在滑面的位置及相应的安全系数,鉴于坡体位移可在现场监测中直接得到,提出边坡潜在滑面确定的位移判据,采用大变形有限元首先计算出边坡的位移场,然后在开挖面的不同高度作塑性区内的水平位移参考线,依次连接参考线上的位移突变点即得到边坡失稳的潜在滑面位置,分析滑面上的应力以及岩体抗剪强度即得到边坡的整体安全系数。  相似文献   

煤矿井简检查孔施工技术探讨     

耿建国 《中国煤田地质》2005,17(1):39-40

介绍了煤矿井筒检查孔的特点和技术、质量要求,总结了以往工程中的经验教训,针对工程中的技术难点,如取心、孔斜控制、抽水作业和冲洗液选择与维护等影响质量、工期的关键环节提出了技术措施,为优质、高效施工此类工程提供借鉴.  相似文献