黄土洞室掘进深度与围岩位移变化规律研究     

时卫民  王鹏  赵尚毅 《岩土工程技术》2020,(2):70-75

应用PLAXIS 2D/3D有限元分析软件,对某黄土洞室进行了二维、三维分步掘进、三维一次掘进等工况的弹塑性有限元分析,研究分析了不同工况下洞室围岩位移的变化规律,并对掌子面的空间效应进行了分析。分析结果表明,二维与三维分步计算的最终位移基本一致,可以用二维的计算结果来估算洞室开挖的最终位移。三维分步掘进的分析表明,不同埋深的洞室其位移比的变化规律基本一致,当L/B<1时(L为掘进深度,B为洞室跨度),位移比呈线性增加;当L/B>1时,位移比呈非线性增加;当L/B>3时,其最大位移接近最终位移。掌子面的空间效应分析表明,在掌子面处的位移约为最终位移的1/3,距掌子面0.5倍跨度处的位移约为最终位移的2/3,距掌子面2.5倍跨度处的位移基本达到了最终位移。  相似文献   

基于GPS和水准数据的微粒群算法联合反演祁连山北缘断裂三维滑动速率     

刘杰 《大地测量与地球动力学》2019,39(9):906-909

将微粒群算法与位错理论模型相结合，采用中国地壳运动观测网络提供的青藏高原地区2001~2004年GPS测量数据和2000~2006年水准测量数据，通过常规定权和附有相对权比的方法对祁连山北缘断裂的三维滑动速率进行联合反演，并与蚁群算法反演结果进行对比。结果表明，微粒群算法收敛速度快、稳定性高，结合经典位错理论模型，是一种可以有效求解断层三维滑动速率反演问题的优化算法，在大地测量反演领域极具应用潜力。  相似文献   

Modeling spatially non-stationary land use/cover change in the lower Connecticut River Basin by combining geographically weighted logistic regression and the CA-Markov model   总被引：2，自引：0，他引：2  

Hui Wang  Scott R. Stephenson  Shijin Qu 《International journal of geographical information science》2019,33(7):1313-1334

Simulating land use/cover change (LUCC) and determining its transition rules have been a focus of research for several decades. Previous studies used ordinary logistic regression (OLR) to determine transition rules in cellular automata (CA) modeling of LUCC, which often neglected the spatially non-stationary relationships between driving factors and land use/cover categories. We use an integrated geographically weighted logistic regression (GWLR) CA-Markov method to simulate LUCC from 2001–2011 over 29 towns in the Connecticut River Basin. Results are compared with those obtained from the OLR-CA-Markov method, and the sensitivity of LUCC simulated by the GWLR-CA-Markov method to the spatial non-stationarity-based suitability map is investigated. Analysis of residuals indicates better goodness of fit in model calibration for geographically weighted regression (GWR) than OLR. Coefficients of driving factors indicate that GWLR outperforms OLR in depicting the local suitability of land use/cover categories. Kappa statistics of the simulated maps indicate high agreement with observed land use/cover for both OLR-CA-Markov and GWLR-CA-Markov methods. Similarity in simulation accuracy between the methods suggests that the sensitivity of simulated LUCC to suitability inputs is low with respect to spatial non-stationarity. Therefore, this study provides critical insight on the role of spatial non-stationarity throughout the process of LUCC simulation.  相似文献   

微生物勘探技术在潮汕坳陷油气勘探中的应用初探     

赵忠泉  孙鸣  万晓明  陈胜红  赵静  宋立军  李辉  强昆生  梁永兴 《中国地质》2020,47(3):645-654

东沙海域潮汕坳陷中生界研究程度相对较低,油气分布规律不明,为了加强对该区油气分布和富集规律的研究,针对潮汕坳陷西部地质目标首次应用微生物地球化学勘探技术(MGCE),探讨其含油气性。MGCE技术以轻烃微渗漏理论为基础,采用地质微生物学方法和地球化学方法检测研究区海底表层的微生物异常和吸附烃异常,预测研究区下伏地层中油气的富集区及其油气性质。检测结果显示研究区西部凹陷的斜坡区微生物异常呈块状发育,轻烃微渗漏强度变化大,可能为潜在油气富集区,酸解吸附烃成果显示可能的油气性质为干气和凝析油气。  相似文献   

Undrained lower bound solutions for end bearing capacity of shallow circular piles in non-homogeneous and anisotropic clays     

Boonchai Ukritchon  Suraparb Keawsawasvong 《国际地质力学数值与分析法杂志》2020,44(5):596-632

The undrained bearing capacity of shallow circular piles in non-homogeneous and anisotropic clay is investigated by the lower bound (LB) finite element limit analysis (FELA) under two-dimensional (2D) axisymmetric condition using second-order cone programming, and the new solution of the problem is presented. Modified from the isotropic von Mises yield criterion, a cross-anisotropic undrained strength criterion of clays under the axisymmetric state of stress requiring three input shear strengths in triaxial compression, direct simple shear, and triaxial extension is employed in the 2D axisymmetric LB FELA. Parametric studies on the effects of pile embedment ratio, dimensionless strength gradient, anisotropic strength ratio, and pile roughness are investigated extensively, while the predicted failure mechanisms associated with these parameters are discussed and compared. Numerical results of undrained end bearing capacity of shallow circular piles are summarized in the form of design tables that are useful for design practice and represent a new contribution to the field of pile capacity considering the combined effects of undrained strength non-homogeneity and anisotropy.  相似文献   

Fully coupled hydraulic fracture simulation using the improved element partition method     

Shujun Peng  Zhennan Zhang  Jianye Mou  Bing Zhao  Zhiyuan Liu  Jiading Wang 《国际地质力学数值与分析法杂志》2019,43(1):441-460

The improved element partition method (IEPM) is a newly developed fracture simulation approach. IEPM allows a fracture to run across an element without introducing extra degrees of freedom. It can also simulate any number of fractures in a prescribed mesh without remeshing. In this study, the IEPM is extended to hydraulic fracture simulation. First, the seepage and volumetric storage matrix of a cracked element are derived using virtual nodes (the intersection points of a crack with element edges). Subsequently, the fully coupled hydromechanical equation is derived for this cracked element. To eliminate the extra degrees of freedom (virtual nodal quantities), the water pressure and displacement of the virtual nodes are associated with their adjacent nodes through least squares interpolation. Finally, the fully coupled equation in terms of nodal quantities is obtained. The verification cases validate the method. By using this method, the field-scale hydraulic fracturing process is well simulated. The proposed approach is simple and efficient for field-scale hydraulic fracture simulation.  相似文献   

Quantitative prediction of discrete element models on complex loading paths     

Luc Sibille  Pascal Villard  Félix Darve  Rodaina Aboul Hosn 《国际地质力学数值与分析法杂志》2019,43(5):858-887

The ability of discrete element models to describe quantitatively (and not only qualitatively) the constitutive behaviour of a dense sand is assessed in this paper. Two kinds of 3D discrete models are considered. Both consider spheres as elementary particles. Nevertheless, the first model implements a contact law with rolling resistance whereas the second takes into account clumps made of two spheres. The discrete models are calibrated and validated from mechanical tests performed on a dense Hostun sand with a true triaxial apparatus. The calibration is carried out from axisymmetric drained compression tests, while the validation is discussed from monotonic and cyclic stress proportional loading paths and from a circular stress path in the deviatoric stress plane. The quality of the predictions of the discrete models are evaluated by comparison with the predictions given with advanced phenomenological constitutive relations, mainly an incrementally non-linear relation. Predictions given by the discrete models are remarkable, particularly when it is put in perspective with respect to the very few number of mechanical tests required for their calibration. However, these results and conclusions were reached in enabling conditions, and some limitations of such discrete models should be kept in mind.  相似文献   

海底观测网发展现状及趋势研究     

陈建冬  张达  王潇  潘筱屹  王策男  张自丽  葛辉良 《海洋技术学报》2019,38(6):95-103

文中详细研究了当前世界上最典型的海底观测网的建设发展规模、形式、设备类型以及我国海底观测网的发展现状,并对国内外海底观测网的发展趋势进行总结。对日本、加拿大、美国及欧洲的海底观测网进行了设备级研究,对我国台湾地区、东海、南海的海底观测网现状进行了研究,并讨论了国外先进观测网对我国的海底观测网建设的借鉴意义。文中总结出海底观测网发展的整体趋势为:单节点网络加速验证新型设备及传感器的水下能力;区域尺度网络用于加速多学科发展并提升灾害预警能力;而浮标平台网络作为补充,铺设在远海区域以降低阶段建设成本。  相似文献   

GBW10010a大米标准物质复(研)制及数据特征     

杨榕  顾铁新  潘含江  刘妹  周国华 《岩矿测试》2020,39(6):866-877

随着我国对生态文明建设的重视，自然资源综合调查势在必行，对生物标准物质亦提出了新的需求。当前相关调研工作已经大面积开展，自然资源综合调查、农产品与食品安全评价都需要对生物样品元素组成进行准确测试，需要以生物标准物质作为生物成分测试量值比对和溯源的基础，因此对生物基体标准物质的需求量大幅增加。大米作为主要粮食之一，其食品安全日益受到重视，对大米中的化学成分进行准确的分析测试具有重要的现实意义，因而对大米标准物质的需求量尤为突出，但目前大米成分分析标准物质已供不应求。本文严格按照《标准物质定值的通用原则及统计学原理》（JJF 1343—2012）和《地质分析标准物质的研制》（JJF 1646—2017）等相关规范要求，开展了GBW10010a大米成分分析标准物质的复（研）制工作，包括样品采集、加工制备、均匀性检验、稳定性检验、多家实验室协作定值测试及不确定度评定等关键环节。结果表明：本次复（研）制的大米标准物质定值成分多样、量值准确可靠，符合国家一级标准物质的要求。GBW10010a共定值54项主微量元素，包括Ag、Al、As、B、Ba、Be、Bi、Ca、Cd、Ce、Co、Cr、Cs、Cu、Dy、Er、Eu、Fe、Gd、Ge、Hg、Ho、K、La、Li、Ho、Mg、Mn、Mo、N、Na、Nb、Nd、Ni、P、Pb、Pr、Rb、S、Sb、Sc、Se、Si、Sm、Sr、Tb、Th、Tl、Tm、U、V、Y、Yb、Zn，其中的39项元素给出了标准值及不确定度，包括Ag、Al、As、B、Ba、Ca、Cd、Ce、Co、Cs、Cu、Dy、Er、Fe、Hg、K、Li、Mg、Mn、Mo、N、Na、Nd、Ni、P、Pb、Pr、Rb、S、Sb、Se、Si、Sm、Sr、Tb、Tl、Y、Yb、Zn；15项元素提供参考值，包括Be、Bi、Cr、Eu、Gd、Ge、Ho、Ho、La、Nb、Sc、Th、Tm、U、V。与原有GBW10010大米标准物质相比较，GBW10010a中As、Cd、Co、Cr、Cu、Hg、Mn、Mo、Ni、Zn等重金属元素含量显著下降，其中Cd、Cu、Zn降幅较大，分别下降约39%、43%、38.7%，一定程度上反映了农田生态环境的改善。本批标准物质定值元素总数量增加了6项，新增定值元素Ag、Nb（Nb给出参考值），并且各项元素不确定度范围整体上有所缩小，如Al、Cd、Cu、Fe、K、Mg、Mo、Na、P、Pb、Se、Zn等对生物易有影响的重要元素，表明了地质分析测试方法技术的进步及定值水平的提高。本批标准物质定值元素涵盖了具有生物效应的大部分主微量元素，适用于农业生态环境地球化学调查与评价、生物样品测试、农产品质量与食品安全评价样品测试时的分析仪器校正、分析方法评价和分析质量监控等多个领域。  相似文献   

晋西北地区表层土壤粒度与地球化学元素组成   总被引：1，自引：1，他引：0  

李继彦  周玲  刘益  张倩  蔡莹莹  张宝贵 《中国沙漠》2019,39(5):155-162

对晋西北地区表层土壤的物质组成进行研究，可以明确其物质来源、沉积环境及化学风化特征。选择区内表层土壤（深度0、10、20 cm）及其附近的河流沉积物，进行粒度和化学元素组成测试。结果表明：（1）晋西北地区表层土壤粒度组成以黏土和粉沙为主，且有自地表向下粗颗粒组分含量增加的趋势。（2）常量化学元素组成以SiO₂、Al₂O₃、CaO、Fe₂O₃为主，其余元素含量均较低。化学元素组成模式表明研究区内表层土壤物质与黄土高原腹地黄土有相同的物质源区，黄河河流沉积物对其贡献不大。（3）晋西北表层土壤的CIA值为52.70~57.89，平均54.06，说明它们的化学风化程度较低，处于早期的脱Na、Ca阶段。这是由于研究区地理位置比洛川更靠北，气温和降水量均低于洛川，降水量与兰州相差不大，但是年平均气温和年温差比兰州低。该研究明确了晋西北地区表层土壤的物质组成特征，为区域潜在沙漠化危害防治提供了数据支撑。  相似文献