Long-term hydrology and aquatic biogeochemistry data from H. J. Andrews Experimental Forest,Cascade Mountains,Oregon     

Sherri L. Johnson  Don Henshaw  Greg Downing  Steve Wondzell  Mark Schulze  Adam Kennedy  Greg Cohn  Stephanie A. Schmidt  Julia A. Jones 《水文研究》2021,35(5):e14187

The H. J. Andrews Experimental Forest (HJA) encompasses the 6400 ha Lookout Creek watershed in western Oregon, USA. Hydrologic, chemistry and precipitation data have been collected, curated, and archived for up to 70 years. The HJA was established in 1948 to study the effects of harvest of old-growth conifer forest and logging-road construction on water quality, quantity and vegetation succession. Over time, research questions have expanded to include terrestrial and aquatic species, communities and ecosystem dynamics. There are nine small experimental watersheds and 10 gaging stations in the HJA, including both reference and experimentally treated watersheds. Gaged watershed areas range from 8.5 to 6242 ha. All gaging stations record stage height, water conductivity, water temperature and above-stream air temperature. At nine of the gage sites, flow-proportional water samples are collected and composited over 3-week intervals for chemical analysis. Analysis of stream and precipitation chemistry began in 1968. Analytes include dissolved and particulate species of nitrogen and phosphorus, dissolved organic carbon, pH, specific conductance, suspended sediment, alkalinity, and major cations and anions. Supporting climate measurements began in the 1950s in association with the first small watershed experiments. Over time, and following the initiation of the Long Term Ecological Research (LTER) grant in 1980, infrastructure expanded to include a set of benchmark and secondary meteorological stations located in clearings spanning the elevation range within the Lookout Creek watershed, as well as a large number of forest understory temperature stations. Extensive metadata on sensor configurations, changes in methods over time, sensor accuracy and precision, and data quality control flags are associated with the HJA data.  相似文献   

The potential of Pléiades images with high angle of incidence for reconstructing the coastal cliff face in Normandy (France)     

《International Journal of Applied Earth Observation and Geoinformation》2020

To monitor chalk cliff face along the Normandy coast (NW France) which is prone to erosion, we tested the potential of cliff face 3D reconstruction using pairs of images with high angle of incidence at different dates from the agile Pléiades satellites. The verticality aspect of the cliff face brings difficulties in the 3D reconstruction process. Furthermore, the studied area is challenging mainly because the cliff face is north-oriented (shadow). Pléiades images were acquired over several days (multi-date stereoscopic method) with requested incidence angles until 40°. 3D reconstructions of the cliff face were compared using two software: ASP® and ERDAS IMAGINE®. Our results are twofold. Firstly, despite ASP® provides denser point clouds than ERDAS IMAGINE® (an average of 1.60 points/m² from 40° incidence angle stereoscopic pairs on the whole cliff face of Varengeville-sur-Mer against 0.77 points/m² respectively), ERDAS IMAGINE® provides more reliable point clouds than ASP® (precision assessment on the Varengeville-sur-Mer cliff face of 0.31 m ± 2.53 and 0.39 m ± 4.24 respectively), with a better spatial distribution over the cliff face and a better representation of the cliff face shape. Secondly, the quality of 3D reconstructions depends mostly on the amount of noise from raw images and on the shadow intensity on the cliff face (radiometric quality of images).  相似文献   

无人机技术在海岛测绘中的应用     

李雪瑞  魏征  田松  李明杰 《测绘通报》2020,(1):150-153

为提高海岛测绘的技术手段，将无人机引入海岛地形调查中，以Swallow-P小型固定翼无人机开展惠州市大亚湾虎洲海岛大比例尺测图为例，系统归纳了无人机外业数据采集与内业数据处理的具体流程，并制作了DEM和DOM成果；经过实测地面点精度分析得出虎洲无人机大比例尺测图成果平面位置中误差和高程中误差符合1∶1000测图精度要求。  相似文献   

基于钻进状态监测的智能工况识别          下载免费PDF全文

范海鹏  吴敏  曹卫华  赖旭芝  陈略峰  陆承达 《探矿工程》2020,47(4):106-113

钻进过程状态监测旨在实时描述钻进工况，判断运行性能优劣程度进行非优追溯，及时指导司钻人员调整作业操作,保证钻进过程安全、高效、稳定开展。钻进工况是钻进系统运行状态的反映，因此开展面向状态监测技术的钻进工况识别研究具有重要的理论和应用价值。本文针对钻进工况识别问题，基于状态监测数据，建立基于支持向量机的钻进工况识别模型，对钻进工况进行识别。综合工况识别结果，对钻进效率进行评估，并对影响钻进效率的因素进行讨论，寻找提升钻进效率的手段。最后，采用钻进现场实钻数据进行仿真实验,验证所提方法的可行性和有效性。  相似文献   

CMD180T型钻机在尚义地热井施工中的应用          下载免费PDF全文

王雷浩  李光宏  石逊  殷邈 《探矿工程》2020,47(1):58-61

经物探分析在河北省张家口尚义县大青沟镇南海子村东南1.0 km存在深部断裂构造，为了寻找开发坝上地区地热资源，决定在该位置施工一口2000 m深地热井，即穿过该断裂构造寻找导水通道，完成地热井施工任务。施工中采用了CMD180T型钻机，该钻机采用了先进的全液压传动系统，自动化程度高，性能优异，可大大降低操作人员的劳动强度且易于搬迁、易于操作。其优势在这次地热井工程施工过程中得到了充分的体现。  相似文献   

极地冰钻关键技术研究进展          下载免费PDF全文

张楠  王亮  Pavel Talalay  范晓鹏  王如生  杨阳  洪嘉琳  宫达  孙友宏  李院生  李冰 《探矿工程》2020,47(2):1-16

极地冰钻技术是获取冰芯，研究冰盖-冰架-海洋相互作用，以及获取极地冰下基岩与冰下水环境样品，开展冰下环境探测的重要手段。目前极地冰钻技术的难点与前沿主要包括深冰芯钻探、冰架热水钻、冰下基岩钻和冰下水环境采样与观测技术。本文针对以上4个极地冰钻关键技术，对国内外相关技术的研究进展与项目开展情况进行了总结与梳理。综合来看，虽然我国开展极地钻探技术研究起步较晚，但随着我国极地战略不断推进，我国的极地冰钻关键技术与装备的研究正持续向着赶超极地钻探强国方向迈进，这必将为我国的极地科学研究提供强有力的技术支撑。  相似文献   

Study on deepwater conductor jet excavation mechanism in cohesive soil     

《Applied Ocean Research》2019

Conductor casing jetting technique has been increasingly applied in deepwater drilling. The insight into the jetting excavation mechanisms is critical in guiding a successful conductor casing jetting operation. The real- time continuous jet excavation process is simulated with the volume of fluid (VOF) multiphase method of CFD (Computational Fluid Dynamics) ANSYS Fluent calculation software in the current study. The cohesive soil is modelled by using a kind of viscous fluid with Herschel-Bulkley model. In addition, a laboratory half round nozzle jet excavation test is designed for verification by comparison of the observed jet excavation profile with the numerical results. The sensitivity parameters affecting the conductor jetting excavation mechanism in cohesive soil are thus investigated. It is found that the application of Herschel-Bulkley (HB) model for cohesive soil and the VOF method of Fluent can provide a good simulation of jet excavation process. The maximum excavation depth can be determined by the undrained ultimate bearing capacity of the circular foundation with a bearing capacity factor of 6.7. The nozzle position, jet velocity and soil strength have significantly influence on the depth and width of the jet excavation profile in conductor oblique jet.  相似文献   

X波段高分辨率SAR数据土石坝表面相干性时序变化分析     

单强  姜卫平  李陶  陈露璐 《测绘通报》2020,(10):1-5

本文以深圳公明水库6个中小型土石坝为试验区，利用10景1 m分辨率升降轨X波段TerraSAR影像和坝体附近连续气象站的降雨量数据，研究了坝体表面相干性的时序变化与雷达本地入射角及降雨的关系。试验结果表明，混凝土面板和草坡平均相干性均会随本地入射角增加而减小，同时，草坡表面平均相干性在有微小降雨的情况下就会快速下降0.1~0.2，差分干涉图的噪声增大；混凝土面板对微小的降雨敏感度小，但是在暴雨情况下将导致其表面完全失相干。上述结果表明，针对中小土石坝坡体变形监测应当顾及坝体的坡度及入射角选择合适的雷达成像参数，同时应充分利用降雨资料评估干涉图失相干情况，剔除噪声数据。  相似文献   

内点最大化与冗余点控制的无人机遥感图像配准     

余蕊  陈玮扬  杨扬  杨昆  罗毅 《遥感学报》2020,24(11):1325-1341

利用小型无人机进行遥感图像配准在自然灾害损害评估、环境监测和目标检测与追踪等领域发挥着至关重要的作用，但小型无人机的图像采集过程容易受风速/风向、复杂地形、电池容量、飞行姿态、飞行高度等自然或人为因素的影响。这些问题通常会导致捕捉到的场景重叠率低与图像非刚性畸变，在特征点提取过程中产生大量冗余点，增加了图像配准的难度。本文提出一种基于特征点的小型无人机图像配准方法，该方法的核心思想是在配准过程中识别冗余点，同时最大化可用内点数量。所识别的冗余点当作控制点，用于控制网格代图像的运动。最后通过最大化内点和合理移动控制点来恢复图像变换。本文使用50对小型无人机图像进行特征匹配和图像配准的实验，其中平均配准精度可达80.38%，并且本文方法在所有的情况下都优于5种当前流行算法。  相似文献   

高强耐热铝合金钻杆材料优选          下载免费PDF全文

梁健  尹浩  孙建华  李亚红  王成彪  张金昌 《探矿工程》2020,47(4):65-71

铝合金钻杆的使用性能是制约深部钻探技术发展的“瓶颈”。本文综合考虑孔内工况因素和钻杆性能因素，以钻柱组合设计为基础准则，从特深孔钻探工程技术需求出发，开展了高强耐温铝合金钻杆材质选择和评价的试验研究。试验结果表明：2219铝合金固溶时效制度分别为535 ℃/1 h、165 ℃/20 h，2618铝合金固溶时效制度分别为530 ℃/1 h、200 ℃/20 h；2219铝合金在高温长时间暴露后的室温力学性能优于2618铝合金，在高温瞬时条件下的力学性能劣于2618铝合金；2219铝合金中含有Zr，该元素在热暴露过程中起到减缓溶质扩散速率的作用，这对提高热暴露后的剩余强度是有利的。  相似文献