硅灰加固宁波软土的试验研究     

王泽平  王常明  江南  张在恒 《岩土工程技术》2020,(2):111-116,121

为探索硅灰对软土的力学性质的影响,以宁波鄞州地区一种淤泥质黏土为试样,掺入不同量的硅灰,对硅灰加固土的力学性质和结构特征进行了测试。采用三轴不固结不排水剪切试验,测试分析了不同掺入量的硅灰加固土的应力应变关系,通过扫描电镜SEM照片分析了不同硅灰掺入量的硅灰加固土的结构特征。结果表明:(1)硅灰可以提高软土的黏聚力,黏聚力随着硅灰掺入量的增加而增大;(2)随着硅灰掺入量的增加,硅灰加固土的抗变形能力呈先增加后减小的趋势;(3)同一围压条件下,随着硅灰掺入量的增加,硅灰加固土的破坏偏应力逐渐增加;(4)随着硅灰掺入量的增加,硅灰加固土中大孔隙逐渐减少,小孔隙逐渐数量增加,孔径<1μm的小孔隙组分逐渐占优。  相似文献   

珠江三角洲海相沉积软土压缩和剪切变形特性试验研究   总被引：3，自引：0，他引：3       下载免费PDF全文

张岩  耿济世  毛磊  刘芙荣 《地震工程学报》2018,40(4):745-751

为了研究近代海相沉积软土的变形特征,本文对珠江三角洲河口地区的全新世海相沉积的软土进行了室内单轴压缩与不同围压下作用下的三轴固结不排水(CU)、不固结不排水(UU)的剪切试验。试验结果表明:原状土和重塑土样的孔隙比随压力的增大而下降,且与加压方式有密切关系,加压幅度越小,土的扰动破坏越小;原状土样固结系数随着压力增加而递减,整体近似符合指数函数分布,重塑土样固结系数随着压力增加逐渐增大,整体近似符合线性函数分布。在相同的固结压力下,原状土样的强度低于重塑土样的强度。土样的应力应变曲线为应变硬化型,且围压对重塑土的影响小于原状土。  相似文献   

Numerical evaluation of soft inter‐slab joint in concrete‐faced rockfill dam with dual mortar finite element method          下载免费PDF全文

Mozhen Zhou  Bingyin Zhang  Chong Peng 《国际地质力学数值与分析法杂志》2018,42(5):781-805

Recently constructed concrete‐faced rockfill dams (CFRDs) often use soft inter‐slab joints to prevent axial compression‐induced extrusion damage in the concrete face. Due to the complexity of the multibody contact and the lack of information on the actual behavior of soft joints, it is highly challenging to numerically assess the effect of soft joints in CFRDs. In this paper, we present a numerical approach for the three‐dimensional modeling of CFRDs with hard and soft joints. A dual mortar finite element method with Lagrange multiplier is developed to treat the multibody contact in hard joints with impenetrability condition. The soft joint slab‐filler‐slab contact system is modeled using an equivalent contact interface approach, where the soft contact constraints are imposed using a perturbed Lagrange formulation. Through a series of laboratory tests, the mechanical behavior of soft joint is investigated. An extrusion model for the soft joint is presented and implemented in the dual mortar finite element method. The proposed numerical method is applied to the three‐dimensional analysis of Tianshengqiao‐1 CFRD. Despite the complex multibody contact and strong material and geometry nonlinearities in the CFRD, the proposed method is stable and capable of capturing salient characteristics of the CFRD. Numerical results show that in Tianshengqiao‐1, the employment of soft joints can effectively reduce the axial compression stress, thus greatly alleviating the risk of extrusion damage in the concrete face.  相似文献   

水源钻机在超深土层绳索取心钻进中的应用          下载免费PDF全文

杨联锋  段云星 《探矿工程》2020,47(11):44-50

山西省清徐县区域地质调查项目设计800、2000、3000 m科学钻探孔，以调查填补新生界底板埋深控制空白区，各孔钻入基岩30 m完钻。要求全孔取心，岩心采取率≮85%，岩心直径≮60 mm，采用塑料保护管采取原状岩样。针对超深软土层、各组地层特性及厚度未知、钻遇基岩完钻深度未知、大直径高保真全孔取心、项目价格远低于目前市场成本等难题，经过“水源钻机+大提钻取心+长裸眼孔段”实施800 m孔、“岩心钻机+绳索取心+套管固井”实施640 m参数对比孔，创新性使用“水源钻机+绳索取心+长裸眼孔段”工艺完成了2000 m孔的施工。该工艺岩心采取率达到93%，孔径和孔斜符合地质要求，为3000 m孔顺利施工打下了坚实的基础，为同类型项目提供了经验和借鉴。  相似文献   

深厚软土场地基岩地震动反演——以天津波为例          下载免费PDF全文

梁建文  张萍  何颖 《世界地震工程》2020,(3):001-11

根据天津波地表加速度记录和相应实测场地钻孔资料，采用等效线性化方法模拟土体非线性，进行了深厚软土场地基岩地震动反演，研究了频率截断对深厚软土场地基岩地震动反演的影响，为天津波地表加速度记录提供了相应的基岩地震动输入。研究表明:不同截断频率情况下，反演得到的基岩地震动峰值和反应谱曲线形状均相差悬殊，但反演后再正演所得到的地面运动与原地表记录相比，加速度时程曲线形状和峰值大小、反应谱曲线形状和峰值大小均非常接近；可根据工程需要对地表加速度记录进行不同频率的截断，反演得到所需强度的基岩地震动。  相似文献   

红层软岩压缩破坏的分形特征与级联失效过程     

周翠英  梁宁  刘镇 《岩土力学》2019,40(Z1):21-31

基于不同围压条件下的红砂岩三轴压缩试验结果，采用数字图像相关技术对岩样外表面破坏形态进行全程观测，获得不同阶段岩样外表面破坏图像，分别对岩样破坏后阶段的图像进行分析。通过分形盒维数表征岩样外表面裂纹的变化情况，发现岩样破坏越严重，裂纹分形维数越高，且在最后破坏阶段裂纹分形维数出现突变，揭示岩样的破坏特征。引入级联失效数学模型，结合红层软岩内部的矿物成分与细观结构分布特点，概化出其结构的随机连接模型与破坏方式，分析红层软岩加载作用下的内部节点颗粒“容量-荷载”重分配原则以及节点颗粒失效后其初始荷载传递路径。结果表明，红层软岩在受载时为一个级联失效的分阶段破坏过程，级联因子通过级联路径不断传播、增多，级联失效越发明显，同时结合岩石破坏的变形损伤过程与其轴向应力-应变曲线分段特征，揭示该类岩石破坏的级联失效分级标准，为拓展该领域的研究具备一定的参考价值。  相似文献   

New formulae for capacity energy-based assessment of liquefaction triggering     

Yasaman Jafariavval 《Marine Georesources & Geotechnology》2020,38(2):214-222

Abstract

Liquefaction of loose saturated soil deposits is a hazardous type of ground failure occurring under earthquake excitations. Therefore, an accurate estimation of liquefaction potential is extremely important in geotechnical engineering. In the current study, a new model is proposed which estimates the level of strain energy needed for liquefaction initiation. A compiled database containing cyclic tests gathered from previously published works was used to develop new models to predict liquefaction potential. M5′ algorithm was used to find the best correlation between parameters. It was shown that not only the derived formulas are acceptably accurate but also they feature a very simple structure in comparison with available formulas in the literature. The proposed equations are accurate, physically sound and uncomplicated. Furthermore, safety factors were given for different levels of risk, which can be useful for engineering practice. In addition, the influence of different predictors on the liquefaction potential was evaluated and also the significance of input variables was assessed via sensitivity analysis. Finally, a new model was introduced for preliminary estimation of liquefaction potential.  相似文献   

Dynamic characteristics of marine soft clay under variable phase difference and initial static shear stress     

Wenqian Dong  Xiuqing Hu  Hongtao Fu 《Marine Georesources & Geotechnology》2020,38(7):770-785

Abstract

Under seismic loading, the soil layer is subjected to multidirectional cyclic shear stress with different amplitudes and frequencies because of the coupling of multiple shear waves and the soil element within a slope or behind a retaining wall is subjected to initial static shear stress before subjected to cyclic loading. Due to the complexity of seismic loading propagation, a phase difference exists between the initial static shear stress and cyclic shear stress. To investigate the influence of the phase difference and initial static shear stress on cyclic shear strain, cyclic modulus, and cyclic strength, a series of laboratory tests are performed on Wenzhou marine soft clay by multi-directional simple shear system, which can simulate the actual state better by controlling the horizontal cyclic stress in the x and y directions simultaneously. As the phase difference varies from 0° to 90°, the dynamic shear modulus increases and cyclic strain accumulation decreases with an increasing number of cycles. The shear strain increases with the initial shear stress.  相似文献   

辽宁北部早古生代弧－陆碰撞作用的发现及其构造意义     

时溢  石绍山  舒广龙 《地质与资源》2020,29(4):397-400

自然资源部中国地质调查局沈阳地质调查中心基础地质室构造研究团队在辽宁北部法库地区地质调查过程中，初步识别出了一次弧－陆碰撞作用.根据地质年代学研究，其主要发生在早古生代.该发现为华北板块北缘东段松辽盆地覆盖区的早古生代的构造演化史研究提供重要依据.  相似文献   

基于三维激光扫描技术的钢结构扰度检测及应用     

宋云记  王晓民  王智 《测绘通报》2020,(12):160-163

钢结构在长期荷载及不均匀受力的作用下会产生空间变形，其中扰度是其重要的衡量指标。通常采用全站仪采集钢结构轴线上若干特征点进行分析、计算，由于钢结构特征点难以捕捉，测量存在误差，并且有限的空间离散点难以全面反应钢结构空间变形。本文采用徕卡RTC360三维激光扫描进行钢结构扰度测量；介绍了其作业流程及数据处理方法；利用标靶将各个测站的三维点云拼接成一个整体；采用拟合的方法提取空间特征点及轴线；利用三维点云构建空间模型，并与设计模型进行碰撞分析；可全面地反映钢结构的空间变形情况。  相似文献