An extended finite volume method and fixed-stress approach for modeling fluid injection–induced tensile opening in fractured reservoirs     

Rajdeep Deb  Patrick Jenny 《国际地质力学数值与分析法杂志》2020,44(8):1128-1144

Fluid injection–induced tensile opening is modeled using an extended finite volume method (XFVM). An embedded fracture strategy is used for the flow problem, that is, the fractures are discretized using finite volume segments without resolving the grid around them. Further, the discontinuities across fractures are modeled using special basis functions. The fracture openings due to enhanced fluid pressure and the associated shear slip due to traction free boundary condition on the fracture segments are both modeled using these special discontinuity basis functions. Mass transfer between fractures and matrix is modeled using the pressure difference. The enhancement of fracture storativity due to tensile opening leads to stronger coupling between flow and mechanics. An iterative scheme relying on the fixed-stress approach for fractures, which conserves the stress dependent terms over each iteration of the flow problem, has been introduced. Tensile opening has been simulated for single fractures embedded in two- and three-dimensional matrices. The convergence criterion for sequentially implicit fixed-stress scheme for fractures embedded in elastic media is established and has been validated numerically. Further, for 2D simulations, the effect of the matrix permeability for fracture propagation due to tensile opening has been studied.  相似文献   

云南中甸-大具断裂上新发现的地震地表破裂带   总被引：1，自引：0，他引：1  

程理  苏刚  李光涛  尹功明  吴昊  余建强 《震灾防御技术》2019,14(4):797-809

中甸-大具断裂是川滇菱形块体的西南边界，总体走向310°—320°。近年来我们对该断裂进行了1:50000条带状地质填图，发现了断裂活动的地质地貌证据。其中，在丽江大具盆地内（金沙江右岸）沿断裂新发现一处典型地震地表破裂带，长约600m，宽120m左右，主要表现为地表挤压鼓包、挤压垄脊、张裂缝、挤压阶区等，呈NW走向，与中甸-大具断裂走向基本一致。野外工作中，我们详细记录和测量了地表破裂的破裂样式、破裂规模和相关定量数据，利用旋翼无人机测绘了地表破裂带的形态和展布，获得了高精度DEM，分析了地表破裂表现出的运动性质。在已有资料的基础上讨论了地表破裂的形成时代、归属、震级大小，简要分析了其发震断层。新地震地表破裂带的发现为进一步研究中甸-大具断裂活动特征、古地震及地震危险性提供了基础资料。  相似文献   

Clinoform architecture and along‐strike facies variability through an exhumed erosional to accretionary basin margin transition     

Miquel Poyatos‐Mor  George D. Jones  Rufus L. Brunt  Daniel E. Tek  David M. Hodgson  Stephen S. Flint 《Basin Research》2019,31(5):920-947

Exhumed basin margin‐scale clinothems provide important archives for understanding process interactions and reconstructing the physiography of sedimentary basins. However, studies of coeval shelf through slope to basin‐floor deposits are rarely documented, mainly due to outcrop or subsurface dataset limitations. Unit G from the Laingsburg depocentre (Karoo Basin, South Africa) is a rare example of a complete basin margin scale clinothem (>60 km long, 200 m‐high), with >10 km of depositional strike control, which allows a quasi‐3D study of a preserved shelf‐slope‐basin floor transition over a ca. 1,200 km² area. Sand‐prone, wave‐influenced topset deposits close to the shelf‐edge rollover zone can be physically mapped down dip for ca. 10 km as they thicken and transition into heterolithic foreset/slope deposits. These deposits progressively fine and thin over tens of km farther down dip into sand‐starved bottomset/basin‐floor deposits. Only a few km along strike, the coeval foreset/slope deposits are bypass‐dominated with incisional features interpreted as minor slope conduits/gullies. The margin here is steeper, more channelized and records a stepped profile with evidence of sand‐filled intraslope topography, a preserved base‐of‐slope transition zone and sand‐rich bottomset/basin‐floor deposits. Unit G is interpreted as part of a composite depositional sequence that records a change in basin margin style from an underlying incised slope with large sand‐rich basin‐floor fans to an overlying accretion‐dominated shelf with limited sand supply to the slope and basin floor. The change in margin style is accompanied with decreased clinoform height/slope and increased shelf width. This is interpreted to reflect a transition in subsidence style from regional sag, driven by dynamic topography/inherited basement configuration, to early foreland basin flexural loading. Results of this study caution against reconstructing basin margin successions from partial datasets without accounting for temporal and spatial physiographic changes, with potential implications on predictive basin evolution models.  相似文献   

九寨沟Ms7.0地震的同震形变场误差研究及断层滑动分布反演     

庄春晓  王仕祥  王仲想 《测绘与空间地理信息》2020,(3):211-214,224

北京时间2017年8月8日四川省九寨沟发生Ms7.0级地震。为了提高断层滑动分布反演的可靠性,本文利用升降轨InSAR数据联合反演断层滑动分布,再根据模拟形变值二次反演,对比反演结果来探讨升降轨形变场误差和确定断层滑动分布的结果。结果表明,九寨沟升轨同震形变场的质量较好,降轨形变场受余震、震后粘弹性松弛效应影响明显,利用模拟形变值二次反演确定的断层滑动分布可靠性更高。  相似文献   

Lead isotope evolution of the Central European upper mantle:Constraints from the Bohemian Massif     

《地学前缘(英文版)》2020,11(3):925-942

The Pb isotope composition of the upper mantle beneath Central Europe is heterogeneous due to the subduction of regionally contrasting material during the Variscan and Alpine orogenies.Late Variscan to Cenozoic mantlederived melts allow mapping this heterogeneity on a regional scale for the last ca.340 Myr.Late Cretaceous and Cenozoic anorogenic magmatic rocks of the Bohemian Massif(lamprophyres,volcanic rocks of basanite/tephrite and trachyte/phonolite series) concentrate mostly in the Eger Rift.Cretaceous ultramafic lamprophyres yielded the most radiogenic Pb isotope signatures reflecting a maximum contribution from metasomatised lithospheric mantle,whereas Tertiary alkaline lamprophyres originated from mantle with less radiogenic ~(206)Pb/~(204)b ratios suggesting a more substantial modification of lithospheric source by interaction with asthenosphericderived melts.Cenozoic volcanic rocks of the basanite/tephrite and trachyte/phonolite series define a linear mixing trend between these components,indicating dilution of the initial lithospheric mantle signature by upwelling asthenosphere during rifting.The Pb isotope composition of Late Cretaceous and Cenozoic magmatic rocks of the Bohemian Massif follows the same Pb growth curve as Variscan orogenic lamprophyres and lamproites that formed during the collision between Laurussia,Gondwana,and associated terranes.This implies that the crustal Pb signature in the post-Variscan mantle is repeatedly sampled by younger anorogenic melts.Most Cenozoic mantle-derived rocks of Central Europe show similar Pb isotope ranges as the Bohemian Massif.  相似文献   

基于GPS和水准数据的微粒群算法联合反演祁连山北缘断裂三维滑动速率     

刘杰 《大地测量与地球动力学》2019,39(9):906-909

将微粒群算法与位错理论模型相结合，采用中国地壳运动观测网络提供的青藏高原地区2001~2004年GPS测量数据和2000~2006年水准测量数据，通过常规定权和附有相对权比的方法对祁连山北缘断裂的三维滑动速率进行联合反演，并与蚁群算法反演结果进行对比。结果表明，微粒群算法收敛速度快、稳定性高，结合经典位错理论模型，是一种可以有效求解断层三维滑动速率反演问题的优化算法，在大地测量反演领域极具应用潜力。  相似文献   

Timing and development of sedimentation of the Cleaverville Formation and a post‐accretion pull‐apart system in the Cleaverville area,coastal Pilbara Terrane,Pilbara, Western Australia     

Shoichi Kiyokawa  Yuhei Aihara  Mami Takehara  Kenji Horie 《Island Arc》2019,28(6)

In the Cleaverville area of Western Australia, the Regal, Dixon Island, and Cleaverville Formations preserve a Mesoarchean lower‐greenschist‐facies volcano‐sedimentary succession in the coastal Pilbara Terrane. These formations are distributed in a rhomboidal‐shaped area and are unconformably overlain by two narrowly distributed shallow‐marine sedimentary sequences: the Sixty‐Six Hill and Forty‐Four Hill Members of the Lizard Hills Formation. The former member is preserved within the core of the Cleaverville Syncline and the latter formed along the northeast‐trending Eighty‐Seven Fault. Based on the metamorphic grade and structures, two deformation events are recognized: D₁ resulted in folding caused by a collisional event, and D₂ resulted in regional sinistral strike‐slip deformation. A previous study reported that the Cleaverville Formation was deposited at 3020 Ma, after the Prinsep Orogeny (3070–3050 Ma). Our SHRIMP U–Pb zircon ages show that: (i) graded volcaniclastic–felsic tuff within the black shale sequence below the banded iron formation in the Cleaverville Formation yields an age of (3 114 ±14) Ma; (ii) the youngest zircons in sandstones of the Sixty‐Six Hill Member, which unconformably overlies pillow basalt of the Regal Formation, yield ages of 3090–3060 Ma; and (iii) zircons in sandstones of the Forty‐Four Hill Member show two age peaks at 3270 Ma and 3020 Ma. In this way, the Cleaverville Formation was deposited at 3114–3060 Ma and was deformed at 3070–3050 Ma (D₁). Depositional age of the Cleaverville Formation is at least 40–90 Myr older than that proposed in previous studies and pre‐dates the Prinsep Orogeny (3070–3050 Ma). After 3020 Ma, D₂ resulted in the formation of a regional strike‐slip pull‐apart basin in the Cleaverville area. The lower‐greenschist‐facies volcano‐sedimentary rocks are distributed only within this basin structure. This strike‐slip deformation was synchronous with crustal‐scale sinistral shear deformation (3000–2930 Ma) in the Pilbara region.  相似文献   

阿尔金断裂带中段现今构造形变模式的InSAR研究     

邱江涛  朱良玉  王随随 《大地测量与地球动力学》2018,38(8):783-786

利用2007～2010年间14景ALOS PALSAR数据及SBAS InSAR技术，获取阿尔金断裂带中段91°E附近现今地壳形变速率场，并反演该地区断层的滑动速率和闭锁深度。结果表明，阿尔金断裂中段地区的形变速率自北向南呈3个线性梯度变化区，分别为阿尔金山东段8～12 mm/a、索尔库里盆地6～7 mm/a、阿尔金断裂带以南约0 mm/a。3个速率梯度变化区主要集中在喀腊达坂断裂和阿尔金主断裂上；拟合的断层就位于金雁山南缘、喀腊达坂断裂南邻，走滑速率从西（7.1 mm/a）向东（14.0 mm/a）逐渐增大，闭锁深度自西(4.5 km)向东(10.6 km)逐渐趋深。结合前人研究推测，金雁山（阿尔金山链东部）与索尔库里拉分盆地组成的复合破裂构造模式，是转换断层运动时应力和应变调整的主要驱动机制。  相似文献   

川滇块体东边界主要断裂带现今运动特征分析   总被引：2，自引：1，他引：1       下载免费PDF全文

朱爽  王洪栋 《地震工程学报》2018,40(1):79-85

基于2009年以来的GPS观测数据,利用块体模型和GPS剖面方法分别计算川滇块体东边界主要断裂带的滑动速度,并结合跨断裂带的区域应变时间序列分析断裂带现今的运动特征。结果表明:从速度场变化来看,2013—2015期的速度场在川滇块体东北部有东向增加的微弱变化;从滑动速率结果来看,鲜水河北段的左旋走滑运动有所增强,拉张运动有所增加;小江断裂带的左旋走滑运动普遍有微弱的增强;从去掉线性的区域应变时间序列结果来看,小江断裂带南段主张应变在2014年底出现了趋势性转折,值得进一步关注。  相似文献   

汶川地震同震形变场的GPS和InSAR邻轨平滑校正与断层滑移精化反演   总被引：1，自引：1，他引：0  

杨莹辉  陈强  刘国祥  程海琴  刘丽瑶  胡植庆 《地球物理学报》2014,57(5):1462-1476

为克服InSAR观测汶川地震同震形变场的邻轨不连续问题，提出联合GPS观测值与邻轨平滑约束的同震位移校正方法，采用GPS观测形变去除PALSAR轨道误差引入的残留平地相位，基于形变平滑条件校正邻轨干涉相位的不连续性.ALOS/PALSAR干涉处理结果表明，校正后同震形变场的准确度与平滑性得以显著提高，InSAR高相干点残差达3.6 cm，校正后精度提高约60%，低相干点精度提高约40%，校正后形变场的邻接平滑因子标准差减小约33%，验证了轨道误差校正与邻轨平滑约束方法的准确性与可靠性.进一步基于弹性半空间位错模型的断层滑移反演结果表明，断层滑移主要分布于映秀、北川和青川地区，集中于地壳深度0~16 km范围，最大滑动量（位于北川县城）约为9.0 m，GPS反演模型残差为5.5 cm，InSAR反演模型残差达9.2 cm，InSAR反演精度约有30%的显著提高，由模型反演计算得到的地震矩为8.0469×10²⁰ N·m.  相似文献