An overview of hydrometeorological datasets from a small agricultural catchment (Nučice) in the Czech Republic     

Tailin Li  Jakub Jeřábek  Nina Noreika  Tomáš Dostál  David Zumr 《水文研究》2021,35(2):e14042

We introduce the freely available web-based Water in an Agricultural Landscape—NUčice Database (WALNUD) dataset that includes both hydrological and meteorological records at the Nučice experimental catchment (0.53 km²), which is representative of an intensively farmed landscape in the Czech Republic. The Nučice experimental catchment was established in 2011 for the observation of rainfall–runoff processes, soil erosion processes, and water balance of a cultivated landscape. The average altitude is 401 m a.s.l., the mean land slope is 3.9%, and the climate is humid continental (mean annual temperature 7.9°C, annual precipitation 630 mm). The catchment is drained by an artificially straightened stream and consists of three fields covering over 95% of the area which are managed by two different farmers. The typical crops are winter wheat, rapeseed, and alfalfa. The installed equipment includes a standard meteorological station, several rain gauges distributed across the basin, and a flume with an H-type facing that is used to monitor stream discharge, water turbidity, and basic water quality indicators. Additionally, the groundwater level and soil water content at various depths near the stream are recorded. Recently, large-scale soil moisture monitoring efforts have been introduced with the installation of two cosmic-ray neutron sensors for soil moisture monitoring. The datasets consist of observed variables (e.g. measured precipitation, air temperature, stream discharge, and soil moisture) and are available online for public use. The cross-seasonal, open access datasets at this small-scale agricultural catchment will benefit not only hydrologists but also local farmers.  相似文献   

Investigating the vibration properties of integrated ceiling systems considering interactions with surrounding equipment     

Liangjie Qi  Keiichiro Kunitomo  Masahiro Kurata  Yoshiki Ikeda 《地震工程与结构动力学》2020,49(8):772-793

Studies on recent earthquakes highlighted that buildings with minimal structural damage still suffer from extensive damage and failure of nonstructural components. The dropping and damage of suspended ceiling systems, which typically consist of acceleration-sensitive nonstructural elements, resulted in lengthy functional disruptions and extended recovery time. This article experimentally and analytically examined the vibration properties of an integrated ceiling system considering the interactions with surrounding electrical equipment. The theoretical stiffness and corresponding frequency of electrical equipment were initially derived and then verified by subsequent vibration tests and numerical analyses. The seismic performance of the air conditioner (AC) was evaluated with different installment configurations based on design spectra and floor response spectra. Vibration tests of the suspended integrated ceiling system considering the interactions with surrounding equipment showed that the inclusion of peripheral constraints increased the first horizontal vibration frequency of the ceiling system by a factor of approximately 6. The natural frequencies of all components in the integrated ceiling system were almost identical, which was attributed to the coupled behavior between the ceiling panels and surrounding equipment, emphasizing the effect of interactions between adjacent components during dynamic analysis. Based on the above experimental investigation, an associated numerical model of the integrated ceiling system was created. Finally, corresponding parametric studies that included the interactions with surrounding equipment, reinforcing braces of ACs and strengthening members at the rise-up location between two elevations were performed.  相似文献   

Bidirectional shaking table tests of a low-cost friction sliding system with flat-inclined surfaces     

Miguel B. Brito  Mitsuyoshi Akiyama  Yoshitaka Ichikawa  Hiroki Yamaguchi  Riki Honda  Naomitsu Ishigaki 《地震工程与结构动力学》2020,49(8):817-837

A novel low-cost friction sliding system for bidirectional excitation is developed to improve the seismic performance of reinforced concrete (RC) bridge piers. The sliding system is a spherical prototype developed by combining a central flat surface with an inclined spherical segment, characterized by stable oscillation and a large reduction in response accelerations on the flat surface. The inclined part provides a restoring force that limits the residual displacements of the system. Conventional steel and concrete are employed to construct a flat-inclined spherical surface atop an RC pier. The seismic forces are dissipated through the frictions generated during the sliding movements; hence, the seismic resilience of bridges can be ensured with a low-cost design solution. The proposed system is fabricated utilizing a mold created by a three-dimensional printer, which facilitates the use of conventional concrete to construct spherical shapes. The concrete surface is lubricated with a resin material to prevent abrasion from multiple input ground motions. To demonstrate the effectiveness of the system, bidirectional shaking table tests are conducted in the longitudinal and transverse directions of a scaled bridge model. The effect of the inclination angle and the flat surface size is investigated. The results demonstrate a large decrease in response acceleration when the system exhibits circular sliding displacement. Furthermore, the inclination angle that generates the smallest residual displacement is identified experimentally.  相似文献   

Response of a scale-model pile group for a jacket foundation of an offshore wind turbine in liquefiable ground during shaking table tests     

Yung-Yen Ko  Yi-Ting Li 《地震工程与结构动力学》2020,49(15):1682-1701

To investigate the seismic response of a pile group during liquefaction, shaking table tests on a 1/25 scale model of a 2 × 2 pile group were conducted, which were pilot tests of a test project of a scale-model offshore wind turbine with jacket foundation. A large laminar shear box was utilized as the soil container to prepare a liquefiable sandy ground specimen. The pile group model comprising four slender aluminum piles with their pile heads connected by a rigid frame was designed with similitude considerations focusing on soil–pile interaction. The input motions were 2-Hz sinusoids with various acceleration amplitudes. The excess pore water pressure generation indicated that the upper half of the ground specimen reached initial liquefaction under the 50-gal-amplitude excitation, whereas in the 75-gal-amplitude test, almost entire ground was liquefied. Accelerations in soil, on the movable frames composing the laminar boundary of the shear box, and along the pile showed limited difference at the same elevation before liquefaction. After liquefaction, the soil and the movable-frame accelerations that represented the ground response considerably reduced, whereas both the movable frames and the piles exhibited high-frequency jitters other than 2-Hz sinusoid, and meantime, remarkable phase difference between the responses of the pile group and the ground was observed, all probably due to the substantial degradation of liquefied soil. Axial strains along the pile implied its double-curvature bending behavior, and the accordingly calculated moment declined significantly after liquefaction. These observations demonstrated the interaction between soil and piles during liquefaction.  相似文献   

Thresholds for post-wildfire debris flows: Insights from the Pinal Fire,Arizona, USA     

Carissa A. Raymond  Luke A. McGuire  Ann M. Youberg  Dennis M. Staley  Jason W. Kean 《地球表面变化过程与地形》2020,45(6):1349-1360

Wildfire significantly alters the hydrologic properties of a burned area, leading to increases in overland flow, erosion, and the potential for runoff-generated debris flows. The initiation of debris flows in recently burned areas is well characterized by rainfall intensity-duration (ID) thresholds. However, there is currently a paucity of data quantifying the rainfall intensities required to trigger post-wildfire debris flows, which limits our understanding of how and why rainfall ID thresholds vary in different climatic and geologic settings. In this study, we monitored debris-flow activity following the Pinal Fire in central Arizona, which differs from both a climatic and hydrogeomorphic perspective from other regions in the western United States where ID thresholds for post-wildfire debris flows are well established, namely the Transverse Ranges of southern California. Since the peak rainfall intensity within a rainstorm may exceed the rainfall intensity required to trigger a debris flow, the development of robust rainfall ID thresholds requires knowledge of the timing of debris flows within rainstorms. Existing post-wildfire debris-flow studies in Arizona only constrain the peak rainfall intensity within debris-flow-producing storms, which may far exceed the intensity that actually triggered the observed debris flow. In this study, we used pressure transducers within five burned drainage basins to constrain the timing of debris flows within rainstorms. Rainfall ID thresholds derived here from triggering rainfall intensities are, on average, 22 mm h⁻¹ lower than ID thresholds derived under the assumption that the triggering intensity is equal to the maximum rainfall intensity recorded during a rainstorm. We then use a hydrologic model to demonstrate that the magnitude of the 15-min rainfall ID threshold at the Pinal Fire site is associated with the rainfall intensity required to exceed a recently proposed dimensionless discharge threshold for debris-flow initiation. Model results further suggest that previously observed differences in regional ID thresholds between Arizona and the San Gabriel Mountains of southern California may be attributed, in large part, to differences in the hydraulic properties of burned soils. © 2019 John Wiley & Sons, Ltd.  相似文献   

Evaluating soil moisture estimation from ground-penetrating radar hyperbola fitting with respect to a systematic time-domain reflectometry data collection in a boreal podzolic agricultural field     

Chameera Illawathure  Gary Parkin  Sébastien Lambot  Lakshman Galagedara 《水文研究》2020,34(6):1428-1445

The upper 30 cm of the soil profile, which hosts the majority of the root biomass, can be considered as the shallow agricultural root zone of most temperate crops. The electromagnetic wave velocity in the soil obtained from reflection hyperbolas in ground-penetrating radar (GPR) data can be used to estimate soil moisture (SM). Finding shallow hyperbolas in a radargram and minimizing the subjective error associated with the hyperbola fitting are the main challenges in this approach. Nevertheless, we were motivated by the recent improvements of hyperbola fitting algorithms, which can reduce the subjective error and processing time. To overcome the difficulty of finding very shallow hyperbolas, we applied the hyperbola fitting method to reflections ranging from 27- to 50-cm depth using a 500-MHz centre-frequency GPR and compared the estimated moisture with vertically installed, 30-cm-long time-domain reflectometry (TDR) sensors. We also compared TDR and GPR sample areas in a 2-D plane using different GPR survey types and different hyperbola depths. SM measured with TDR and GPR were not significantly different according to Mann–Whitney's test. Our analyses showed that a root mean square error of 0.03 m³ m⁻³ was found between the two methods. In conclusion, the proposed method might be suitable to estimate SM with an acceptable accuracy within the root zone if the soil profile is fairly uniform within the application depth range.  相似文献   

柱顶层间隔震体系增量动力响应研究          下载免费PDF全文

袁梦醒  陈望  刘彦辉  谭平  金建敏 《地震工程学报》2020,42(4):872-880

针对悬臂柱顶有拉梁和无拉梁层间隔震体系的抗震性能问题,运用增量动力分析(IDA)方法进行弹塑性分析,模拟结构从弹性到弹塑性直至最后倒塌的全过程。通过调幅地震动得到相应的层间位移角及峰值加速度,分别绘制单条与多条IDA曲线分析拉梁对隔震结构动力响应的影响,研究两种结构的抗震性能。结果表明:在相同性能点,有拉梁和无拉梁对纤维铰弯矩值和曲率值基本无影响,而在不同性能点,纤维铰状态明显不同;两种体系从正常使用阶段到防止倒塌阶段所需的加速度峰值的差距慢慢增大;在极罕遇地震下,柱顶有拉梁层间隔震体系的下部结构抗震性能要高于柱顶无拉梁层间隔震体系。  相似文献   

基于已知特征平面的移动测量系统安置参数检校     

张顺  张帆  李珂 《北京测绘》2020,(3):437-442

安置误差是影响移动测量系统激光点云精度的主要因素之一。当激光点云中存在特征平面时,安置误差会导致该平面与真实平面之间产生较大的偏差,如果存在多个空间上位置关系较好的特征平面,就能够全面反映出系统的安置误差。本文以此为依据,给出了一种基于已知特征平面的移动测量系统安置参数检校方法,并详细阐述了检校场的布设、数据获取及处理等内容。实验证明,该方法是一种简单、可靠的检校方法,具有较高的实用性。  相似文献   

eLoran系统新型信号波形设计及其性能评估          下载免费PDF全文

李婉清  刘中伟  李实锋  叶清琳 《全球定位系统》2020,45(2):13-20

增强型罗兰导航系统(eLoran)作为全球卫星导航系统(GNSS)的备份系统,是国家定位导航授时(PNT)安全的重要基础设施.针对目前标准eLoran信号存在易受交叉干扰、天波干扰,通信数据传输速率低等的问题,本文基于标准罗兰信号体制提出了两种波形改进方法(衰减函数法与对称波形法)并对新型波形进行性能评估.实验结果表明,两种方法能够有效缩短波形持续时间,加速后沿波形下降,减小发射机功耗.对称波形法能够大幅减小波形持续时间,但缩短波形持续时间也将改变原信号波形的频谱特性,利用衰减函数法可以最大程度保证信号的频谱性能.综合分析可知,新型波形能够有效利用时域资源,空余的时间可用于增加传输信号,进而提高数据调制技术的性能.  相似文献   

广西土壤有机质空间变异特征及其影响因素研究   总被引：2，自引：0，他引：2  

钟聪  李小洁  何园燕  邱微文  李杰  张新英  胡宝清 《地理科学》2020,40(3):478-485

基于广西第二次土壤普查的270个土壤剖面资料,结合1∶50万数字化土壤类型图、土地利用类型图和气象监测数据等资料,利用地统计学和逐步回归分析等方法对广西表层土壤有机质空间变异特征及其影响因素进行了探究。结果表明：广西表层土壤有机质平均含量为3.11±2.19%,变异系数为70.72%,空间分布呈北高南低的趋势。广西表层土壤有机质空间分布受到自然和人为因素的共同影响,土壤类型、成土母质、海拔、土地利用、气候和坡度6个环境因子对全区土壤有机质含量变异的综合解释能力为47.9%。其中,土壤类型是最重要的影响因素,能独立解释其变异的36.0%,海拔和成土母质分别能独立解释28.5%和15.8%。气温对广西土壤有机质空间分布的影响比降水量更加显著,从而造成了广西土壤有机质整体呈南低北高的趋势。同时,土壤有机质对气温的敏感性在一定程度上受到降雨量的制约。此外,研究区农业耕作管理等因素对土壤有机质的影响也不容忽视。  相似文献