桂西北林旺金矿床构造控矿规律及成矿模式探讨     

张知春 《地质与勘探》2020,56(2):277-287

桂西北林旺金矿是近年来右江盆地新发现的卡林型金矿,位于乐业碳酸盐台地边缘乐业-浪全同生断裂带上。通过对矿区进行野外调查、岩矿鉴定并结合勘探成果进行综合研究,发现I号矿体群与断裂、褶皱的时空联系具有构造分带的特征,以F1断层为界,上盘褶皱鞍部发育石英杂砂岩夹粉砂质泥岩矿体,矿体近F1断层破碎带部位发育破碎的硅化构造岩带,F1下盘近破碎带部位发育强烈劈理化、炭化粉砂质泥岩带,指示矿区在印支期挤压过程中,石英杂砂岩顺着先存构造薄弱面以泥岩层为滑动系统,往上部逆冲并逐渐发生褶皱,产生许多张裂隙,成为成矿流体富集的场所。林旺金矿床是层滑-褶皱构造体系与成矿流体耦合作用的产物,分析了矿床构造成矿规律,提出了以层滑-褶皱运动机制为基础的成矿模式以及成矿远景。  相似文献   

文莱-沙巴盆地深水褶皱冲断带构造变形特征及成因机制          下载免费PDF全文

唐武  赵志刚  张功成  谢晓军  刘世翔  王一博  宋双  王龙  孙瑞  郭佳 《地球物理学报》2018,61(10):4281-4295

为揭示活动陆缘深水褶皱冲断带的特征及成因，本文利用地震和区域地质资料的综合分析，系统阐述了文莱—沙巴盆地深水褶皱冲断带的构造变形特征，并结合盆地演化动力学特点，探讨其构造变形机制及其对深水区油气成藏的影响.研究结果表明，文莱—沙巴盆地深水褶皱冲断带具有"垂向分期、平面分段"的特点，垂向上，以中中新统底界面为界可划分为下部（始新世-早中新世）和上部（中中新世-现今）两套逆冲褶皱冲断体系，其中下部逆冲褶皱冲断带的形成与古南海的俯冲作用密切相关，上部逆冲褶皱冲断带是中中新世以来三角洲前缘重力滑动与苏禄海扩张造成的区域挤压应力远程效应共同作用的结果，且苏禄海扩张造成的远程挤压效应主控平面上南北段褶皱冲断带变形的差异性，导致北段褶皱变形强度大于南段，具有背斜褶皱数量多、褶皱间距离短、逆冲断层倾角陡的特点，南段反之；且晚上新世以来北段深水区地层缩短量大于陆架区伸展量，两者之差为2~6 km，而南段两者相当，仅受三角洲前缘重力滑动影响.整个褶皱冲断带发育断弯、断展、断滑褶皱等3种断层相关褶皱以及叠瓦扇和冲起构造2种逆冲构造组合，是多期NW向挤压应力作用下形成的大型逆冲推覆构造，以前展式向盆地扩展.此外，由于中中新世以来逆冲断层的持续活动，研究区深水褶皱冲断带发育众多构造圈闭，油气成藏条件优越，且南段优于北段，靠近陆坡的近端优于远端，可作为勘探部署重点.  相似文献   

北祁连西段寒山金矿控矿构造及富集规律     

李生栋 《地质与勘探》2020,56(4):675-687

寒山金矿床产于北祁连西段加里东褶皱带北缘,区内矿产资源丰富,加强其控矿构造及矿化富集规律研究,对矿区勘查意义重大。通过野外调查及室内研究,发现矿区内赋矿地层为奥陶系阴沟群火山碎屑岩。矿区内褶皱构造及韧-脆性剪切带发育,联合控制了矿体的分布。韧-脆性剪切带发育在褶皱两翼,受层滑剪切系统控制。矿体产在背斜转折端及两翼韧-脆性剪切带内,呈楔形产出,向下迅速尖灭。研究认为,矿体主要富集在韧-脆性剪切带发育部位,矿体的富集程度与蚀变带规模正相关,靠近背斜转折端的位置为矿体富集地段,多阶段成矿作用同部位叠加构成富矿体。  相似文献   

Geometry and kinematics of brittle deformation in the Central Cameroon Shear Zone (Kékem area): Implication for gold exploration within the Central Africa Fold Belt in Cameroon     

《China Geology》2021,4(2):245-255

The Central Africa Fold Belt (CAFB) is a collision belt endowed with gold deposits in Eastern Cameroon area mined for about 50 years. However, favorable areas for gold exploration are poorly known. This paper presents (1) the kinematics of the brittle deformation in the Kékem area in the SW portion of the Central Cameroon Shear Zone and (2) constraints gold mineralization events with respect to the collisional evolution of the CAFB. The authors interpret that the conjugate ENE to E and NNW to NW trending lineament corresponds to the synthetic (R) and the antithetic (R’) shears, which accompanied the dextral slip along the NE to ENE striking shear. The latter coincides with the last 570–552 Ma D₃ dextral simple shear-dominated transpression, which is parallel to the Bétaré Oya shear zone hosting gold deposits. Gold mineralizations, which mainly occurred during the last dextral shearing, are disseminated within quartz veins associated to Riedel’s previous structures reactivated due to late collisional activities of the CAFB as brittle deformation. Gold mineralizations occurred mainly during the 570–552 Ma D₃ event. The reactivation, which might be due to dextral simple shear during mylonitzation, plausibly remobilized the early gold deposits hosted in syn-compressional rocks and/or possibly focused deep-sourced fluid mixed with those released by dehydration. Therefore, the Central Cameroon Shear Zone where Kékem is located, and which shows similar petrographical and structural features to those controling Batouri gold district, is a target area for gold exploration in Cameroon.  相似文献   

New interpretation of the Franciscan mélange at San Simeon coast,California: tectonic intrusion into an accretionary prism     

Yujiro Ogawa  Ryota Mori  Toshiaki Tsunogae  Yildirim Dilek  Ron Harris 《International Geology Review》2015,57(5-8):824-842

Many concepts and interpretations on the formation of the Franciscan mélange have been proposed on the basis of exposures at San Simeon, California. In this paper, we show the distribution of chaotic rocks, their internal structures and textures, and the interrelationship between the chaotic rocks and the surrounding sandstones (turbidites). Mélange components, particularly blueschists, oceanic rocks, including greenstone, pillow lava, bedded chert, limestone, sandstone, and conglomerate, have all been brecciated by retrograde deformation. The Cambria Slab, long interpreted as a trench slope basin, is also strongly deformed by fluidization, brecciation, isoclinal folding, and thrusting, leading us to a new interpretation that turbiditic rocks (including the Cambria Slab) represent trench deposits rather than slope basin sediments. These rocks form an accretionary prism above mélanges that were diapirically emplaced into these rocks first along sinistral-thrust faults, and then along dextral-normal faults. Riedel shear systems are observed in several orders of scale in both stages. Although the exhumation of the blueschist blocks is still controversial, the common extensional fractures and brecciation in most of the blocks in the mélanges and further mixture of various lithologies into one block with mélange muddy matrix indicate that once deeply buried blocks were exhumed from considerable depths to the accretionary prism body, before being diapirically intruded with their host mélange along thrust and normal faults, during which retrograde deformation occurred together with retrograde metamorphism. Recent similar examples of high-pressure rock exhumation have been documented along the Sofugan Tectonic Line in the Izu forearc areas, in the Mineoka belt in the Boso Peninsula, and as part of accretionary prism development in the Nankai and Sagami troughs of Japan. These modern analogues provide actively forming examples of the lithological and deformational features that characterize the Franciscan mélange processes.  相似文献   

Tectonic control of accommodation space and sediment supply within the Mata Amarilla Formation (lower Upper Cretaceous) Patagonia,Argentina          下载免费PDF全文

Augusto N. Varela 《Sedimentology》2015,62(3):867-896

The Mata Amarilla Formation dates from the early Upper Cretaceous and was deposited during a transition in tectonic regime from the extensional Rocas Verdes Basin to the Austral Foreland Basin. Detailed sedimentological logs and architectural parameters were used to define 13 facies associations. The distribution of facies associations and associated variations in fluvial architecture have enabled large‐scale changes in accommodation space/sediment supply ratios (A/S ratio) to be defined for the three component sections of the Mata Amarilla Formation. The lower and upper sections are characterized by a high A/S ratio, whereas the middle section corresponds to a low A/S ratio. In the western part of the study area, small‐scale variations in the A/S ratio were recognized in the middle section. The strong west to east trend in evolution of the fluvial systems coincides with the direction of propagation of the Patagonian fold and thrust belt, which is located to the west of the study area. Intervals of high A/S ratio (i.e. lower and upper sections) are interpreted to have developed during periods of increased loading by the fold and thrust belt caused by tectonic uplift. In contrast, intervals of low A/S ratio (i.e. middle section) were developed during periods of tectonic quiescence. This article suggests that the large‐scale variations in A/S ratios are related to different rates of migration and growth of the Patagonian fold and thrust belt, whereas the small‐scale variation occurred in response to specific periods of thrusting and folding in the Patagonian fold and thrust belt (i.e. local loads). This field example of the effects of different scales of variation in A/S ratios across the Austral Foreland Basin could be used to recognize similar tectonically forced variations in stratigraphic architecture in other foreland basins throughout the world, as well as to understand the response of fluvial systems to such changes.  相似文献   

Displacement transfer from fault-bend to fault-propagation fold geometry: An example from the Himalayan thrust front     

《Journal of Structural Geology》2015

The leading edge of the ENE-trending Himalayan thrust front in Pakistan exhibits along-strike changes in deformational style, ranging from fault-bend to fault-propagation folds. Although the structural geometry is very gently deformed throughout the Salt Range, it becomes progressively more complex to the east as the leading edge of the emergent Salt Range Thrust becomes blind. Surface geology, seismic reflection, petroleum well, and chronostratigraphic data are synthesized to produce a 3-D kinematic model that reconciles the contrasting structural geometries along this part of the Himalayan thrust front. We propose a model whereby displacement was transferred, across a newly-identified lateral ramp, from a fault-bend fold in the west to fault-propagation folds in the east and comparable shortening was synchronously accommodated by two fundamentally different mechanisms: translation vs. telescoping. However, substantially different shortening distribution patterns within these structurally contrasting segments require a tear fault, which later is reactivated as a thrust fault. The present geometry of this S-shaped displacement transfer zone is a combined result of the NW–SE compression of the lateral culmination wall and associated tear fault, and their subsequent modification due to mobilization of underlying ductile salt.  相似文献   

甘肃省北山地区罗雅楚山—大红山一带区域构造格局、褶皱样式及断裂系     

左国朝  刘义科  李绍雄 《甘肃地质》2011,(1):6-15

甘肃北山地区罗雅楚山—大红山一带,赋存青白口纪沉积变质铁矿,由元古宙以来,本区经历了多期次构造变动,形成了现今相互叠置的复杂地质体,其加里东运动及海西运动奠定了本区总体褶皱样式。印支运动发育了逆冲断裂系。最为特色的是燕山运动导致本区大规模由南向北推覆的推覆构造,喜山运动为相对稳定的升降运动。  相似文献   

海南岛西部青白口系石碌群褶皱变形特征及其控矿分析     

陈沐龙  李孙雄  官军  曾雁玲 《华南地质与矿产》2011,27(4):265-272

青白口系石碌群属于一套海相沉积经变质的以细粒碎屑岩、泥岩及镁质碳酸岩夹火山岩为原岩的变质岩系组合,赋存有沉积变质型铁矿和热液型铜钴矿。岩石经历了多期次变形作用的改造,总体表现为由褶皱变形往韧脆性断裂变形演化的特征,褶皱变形包含了三个变形序列的构造形迹组合。与铁矿主成矿期密切有关的NW向石碌复向斜属于海西．印支期造山运动...  相似文献   

Formation of the Dongmozhazhua Pb–Zn Deposit in the Thrust‐Fold Setting of the Tibetan Plateau,China: Evidence from Fluid Inclusion and Stable Isotope Data     

YingChao LIU  ZengQian HOU  ZhuSen YANG  ShiHong TIAN  TianNan YANG  YuCai SONG  HongRui ZHANG  Emmanuel John M. CARRANZA 《Resource Geology》2011,61(4):384-406

The Dongmozhazhua deposit, the largest Pb–Zn deposit in south Qinghai, China, is stratabound, carbonate‐hosted and associated with epigenetic dolomitization and silicification of Lower–Middle Permian—Upper Triassic limestones in the hanging walls of a Cenozoic thrust fault system. The mineralization is localized in a Cenozoic thrust‐folded belt along the northeastern edge of the Tibetan plateau, which was formed due to the India–Asia plate collision during the early Tertiary. The deposit comprises 16 orebodies with variable thicknesses (1.5–26.3 m) and lengths (160–1820 m). The ores occur as dissemination, vein, and breccia cement. The main sulfide assemblage is sphalerite + galena + pyrite + marcasite ± chalcopyrite ± tetrahedrite, and gangue minerals consist mainly of calcite, dolomite, barite, and quartz. Samples of pre‐ to post‐ore stages calcite yielded δ¹³C and δ¹⁸O values that are, respectively, similar to and lower than those yielded by the host limestones, suggesting that the calcite formed from fluids derived from carbonate dissolution. Fluid inclusions in calcite and sphalerite in the polymetallic sulfidization stage mostly comprise liquid and gas phases at room temperature, with moderate homogenization temperatures (100–140°C) and high salinities (21–28 wt% NaCl eq.). Micro‐thermometric fluid inclusion data point to polysaline brines as ore‐forming fluids. The δD and δ¹⁸O values of ore fluids, cation compositions of fluid inclusions, and geological information suggest two main possible fluid sources, namely basinal brines and evaporated seawater. The fluid inclusion data and regional geology suggest that basinal brines derived from Tertiary basins located southeast of the Dongmozhazhua deposit migrated along deep detachment zones of the regional thrust system, leached substantial base metals from country rocks, and finally ascended along thrust faults at Dongmozhazhua. There, the base‐metal‐rich basinal brines mixed with bacterially‐reduced H₂S‐bearing fluids derived from evaporated seawater preserved in the Permo–Triassic carbonate strata. The mixing of the two fluids resulted in Pb–Zn mineralization. The Dongmozhazhua Pb–Zn deposit has many characteristics that are similar to MVT Pb–Zn deposits worldwide.  相似文献