Stable isotope constraints on the fluid source of hydrothermal breccia pipes in the Tankwa Karoo depocentre,South Africa: Breakdown of authigenic minerals during sill intrusion     

Chris Harris  Nonkululeko Buthelezi  Beth Kahle  Richard Kahle  Kathlego Ramahala  George Smith 《Basin Research》2019,31(1):114-135

The Karoo Basin covers much of South Africa and is an area of prospective shale gas exploration, with the Whitehill Formation the target shale unit. However, the sedimentary succession, including the Whitehill, has been intruded by a series of sills and dykes associated with the Karoo Large Igneous Province (~183 Ma), which are expected to have modified the thermal history of the basin dramatically. Here, we investigate a secondary effect of these intrusions: a series of hydrothermal vent complexes, or breccia pipes, focusing on using O, H, and C isotopes to constrain the origin and evolution of fluids produced during the intrusion of basaltic sills. A cluster of breccia pipes have been eroded down to the level of the Ecca Group at Luiperdskop on the western edge of the Karoo basin; a small isolated pipe of similar appearance crops out 13 km to the east. The Luiperdskop pipes are underlain by a Karoo dolerite sill that is assumed to provide the heat driving fluidization. The pipes consist of fine‐grained matrix and about 8% clasts, on average, of mostly sedimentary material; occasional large rafts of quartzite and dolerite are also present. The presence of clasts apparently from the Dwyka Group is consistent with the depth of formation of the pipes being at, or near, the base of the Karoo Supergroup, between 400 and 850 m below present surface. The presence of chlorite as the dominant hydrous mineral is consistent with an emplacement temperature between 300 and 350°C. The major and trace element, and O‐ and H‐isotope composition of the Tankwa breccias is homogenous, consistent with them being derived from the same source. The δ¹⁸O values (vsVSMOW) of the breccias are relatively uniform (7.1‰–8.7‰), and are similar to that of the country rock shale, and both are lower than expected for shale. The water content of the breccia is between 2.7 and 3.1 wt.% and the δD values range from ?109‰ to ?144‰. Calcite in vesicles has δ¹³C and δ¹⁸O (VSMOW) values of ?4.2‰ and 24.0‰, respectively. The low δD value of the breccia rocks does not appear to be due to the presence of methane in the fluid. Instead, it is proposed that low δD and δ¹⁸O values are the result of the fluid being derived from the breakdown of clay minerals that formed and were deposited at a time of cold climate at ~290 Ma.  相似文献   

Appraisal of Hydraulic Flow Units and Factors of the Dynamics and Contamination of Hydrogeological Units in the Littoral Zones: A Case Study of Akwa Ibom State University and Its Environs,Mkpat Enin L.G.A,Nigeria     

George  Nyakno J. 《Natural Resources Research》2020,29(6):3771-3788

Natural Resources Research - Borehole-controlled one-dimensional geo-electric data were integrated with water samples obtained from boreholes drilled near the vertical electrical sounding at 12...  相似文献   

Potential of legacy 2D seismic data for deep targeting and structural imaging at the Neves–Corvo massive sulphide-bearing deposit,Portugal     

George A. Donoso  Alireza Malehmir  Nelson Pacheco  Vitor Araujo  Matthew Penney  Joao Carvalho  Bill Spicer  Steve Beach 《Geophysical Prospecting》2020,68(1):44-61

Seismic methods are becoming an established choice for deep mineral exploration after being extensively tested and employed for the past two decades. To investigate whether the early European mineral-exploration datasets had potential for seismic imaging that was overlooked, we recovered a low-fold legacy seismic dataset from the Neves–Corvo mine site in the Iberian Pyrite Belt in southern Portugal. This dataset comprises six 4–6 km long profiles acquired in 1996 for deep targeting. Using today's industry-scale processing algorithms, the world-class, ca. 150 Mt, Lombador massive sulphide and other smaller deposits were better imaged. Additionally, we also reveal a number of shallow but steeply dipping reflections that were absent in the original processing results. This study highlights that legacy seismic data are valuable and should be revisited regularly to take advantage of new processing algorithms and the experiences gained from processing such data in hard-rock environments elsewhere. Remembering that an initial processing job in hard rock should always aim to first obtain an overall image of the subsurface and make reflections visible, and then subsequent goals of the workflow could be set to, for example understanding relative amplitude ratios. The imaging of the known mineralization implies that this survey could likely have been among one of the pioneer studies in the world that demonstrated the capability of directly imaging massive sulphide deposits using the seismic method.  相似文献   

Wetlands and low-gradient topography are associated with longer hydrologic transit times in Precambrian Shield headwater catchments     

Daniel Lane  Colin P.R. McCarter  Murray Richardson  Chris McConnell  Tim Field  Huaxia Yao  George Arhonditsis  Carl P.J. Mitchell 《水文研究》2020,34(3):598-614

The estimation of hydrologic transit times in a catchment provides insights into the integrated effects of water storage, mixing dynamics, and runoff generation processes. There has been limited effort to estimate transit times in southern boreal Precambrian Shield landscapes, which are characteristically heterogeneous with surface cover including till, thin soils, bedrock outcrops, and depressional wetland features that play contrasting hydrologic roles. This study presents approximately 3.5 years of precipitation and streamflow water isotope data and estimates mean transit times (MTTs) and the young water fraction (p_y) across six small catchments in the Muskoka-Haliburton region of south-central Ontario. The main objectives were to define a typical range of MTTs for headwater catchments in this region and to identify landscape variables that best explain differences in MTTs/p_y using airborne light detection and ranging and digital terrain analysis. Of the transit time distributions, the two parallel linear reservoir and gamma distributions best describe the hydrology of these catchments, particularly because of their ability to capture more extreme changes related to events such as snowmelt. The estimated MTTs, regardless of the modelling approach or distribution used, are positively associated with the percent wetland area and negatively with mean slope in the catchments. In this landscape, low-gradient features such as wetlands increase catchment scale water storage when antecedent conditions are dryer and decrease transit times when there is a moisture surplus, which plausibly explains the increases in MTTs and mean annual runoff from catchments with significant coverage of these landscape features.  相似文献   

Impact of flooded rice paddy on remotely sensed evapotranspiration in the Krishna River basin,India     

Pardhasaradhi Teluguntla  Dongryeol Ryu  Biju George  Jeffrey P. Walker 《水文研究》2020,34(10):2190-2199

Evapotranspiration (ET) is one of the major water exchange processes between the earth's surface and the atmosphere. ET is a combined process of evaporation from open water bodies, bare soil and plant surfaces, and transpiration from vegetation. Remote sensing-based ET models have been developed to estimate spatially distributed ET over large regions, however, many of them reportedly underestimate ET over semi-arid regions (Jamshidi et al., Journal of Hydrometeorology, 2019, 20, 947–964). In this work, we show that underestimation of ET can occur due to the open water evaporation from flooded rice paddies ignored in the existing ET models. To address the gap in ET estimation, we have developed a novel approach that accounts for the missing ET component over flooded rice paddies. Our method improved ET estimates by a modified Penman-Monteith algorithm that considered the fraction of open water evaporation from flooded rice paddies. Daily ET was calculated using ground based meteorological data and the MODIS satellite data over the Krishna River Basin. Seasonal and annual ET values over the Krishna Basin were compared with two different ET algorithms. ET estimates from these two models were also compared for different crop combinations. Results were validated with flux tower-based measurements from other studies. We have identified a 17 mm/year difference in average annual ET over the Krishna River Basin with this new ET algorithm. This is very critical in basin scale water balance analysis and water productivity studies.  相似文献   

Unveiling buried aeolian landscapes: reconstructing a late Holocene dune environment using 3D ground-penetrating radar     

Luis Rees-Hughes  Natasha L. M. Barlow  Adam D. Booth  Landis J. West  George Tuckwell  Tim Grossey 《第四纪科学杂志》2021,36(3):377-390

Across the UK, sandy beaches and dunes protect coastal infrastructure from waves and extreme water levels during large-scale storms, while providing important habitats and recreational opportunities. Understanding their long-term evolution is vital in managing their condition in a changing climate. Recently, ground-penetrating radar (GPR) methods have grown in popularity in geomorphological applications, yielding centimetre-scale resolution images of near-surface stratigraphy and structure, thus allowing landscape evolution to be reconstructed. Additionally, abrupt changes in palaeo-environments can be visualized in three dimensions. Although often complemented by core data, GPR allows interpretations to be extended into areas with minimal ground-truth control. Nonetheless, GPR data interpretation can be non-intuitive and ambiguous, and radargrams may not initially resemble the expected subsurface geometry. Interpretation can be made yet more onerous when handling the large 3D data volumes that are facilitated with modern GPR technology. Here we describe the development of novel semi-automated GPR feature-extraction tools, based on ‘edge detection’ and ‘thresholding’ methods, which detect regions of increased GPR reflectivity which can be applied to aid in the reconstruction of a range Quaternary landscapes. Since reflectivity can be related to lithological and/or pore fluid changes, the 3D architecture of the palaeo-landscape can be reconstructed from the features extracted from a geophysical dataset. We present 500 MHz GPR data collected over a buried Holocene coastal dune system in North Wales, UK, now reclaimed for use as an airfield. Core data from the site, reaching a maximum depth 2 m, suggest rapid vertical changes from sand to silty-organic units, and GPR profiles suggest similar lateral complexity. By applying thresholding methods to GPR depth slices, these lateral complexities are effectively and automatically mapped. Furthermore, automatic extraction of the local reflection power yields a strong correlation with the depth variation of organic content, suggesting it is a cause of reflectivity contrast. GPR-interpolated analyses away from core control thus offer a powerful proxy for parameters derived from invasive core logging. The GPR data collected at Llanbedr airfield highlight a complex dune system to a depth of 2.8 m, probably deposited in several phases over ~700 years, similar to elsewhere in North Wales.  相似文献   

When hazard avoidance is not an option: lessons learned from monitoring the postdisaster Oso landslide,USA     

Reid  Mark E.  Godt  Jonathan W.  LaHusen  Richard G.  Slaughter  Stephen L.  Badger  Thomas C.  Collins  Brian D.  Schulz  William H.  Baum  Rex L.  Coe  Jeffrey A.  Harp  Edwin L.  Schmidt  Kevin M.  Iverson  Richard M.  Smith  Joel B.  Haugerud  Ralph A.  George  David L. 《Landslides》2021,18(9):2993-3009

On 22 March 2014, a massive, catastrophic landslide occurred near Oso, Washington, USA, sweeping more than 1 km across the adjacent valley flats and killing 43 people. For the following 5 weeks, hundreds of workers engaged in an exhaustive search, rescue, and recovery effort directly in the landslide runout path. These workers could not avoid the risks posed by additional large-scale slope collapses. In an effort to ensure worker safety, multiple agencies cooperated to swiftly deploy a monitoring and alerting system consisting of sensors, automated data processing and web-based display, along with defined communication protocols and clear calls to action for emergency management and search personnel. Guided by the principle that an accelerating landslide poses a greater threat than a steadily moving or stationary mass, the system was designed to detect ground motion and vibration using complementary monitoring techniques. Near real-time information was provided by continuous GPS, seismometers/geophones, and extensometers. This information was augmented by repeat-assessment techniques such as terrestrial and aerial laser scanning and time-lapse photography. Fortunately, no major additional landsliding occurred. However, we did detect small headscarp failures as well as slow movement of the remaining landslide mass with the monitoring system. This was an exceptional response situation and the lessons learned are applicable to other landslide disaster crises. They underscore the need for cogent landslide expertise and ready-to-deploy monitoring equipment, the value of using redundant monitoring techniques with distinct goals, the benefit of clearly defined communication protocols, and the importance of continued research into forecasting landslide behavior to allow timely warning.

  相似文献   

Rapid U‐Pb Geochronology by Laser Ablation Multi‐Collector ICP‐MS     

Kurt E. Sundell  George E. Gehrels  Mark E. Pecha 《Geostandards and Geoanalytical Research》2021,45(1):37-57

Detrital zircon (DZ) U‐Pb laser ablation‐inductively coupled plasma‐mass spectrometry (LA‐ICP‐MS) has revolutionised the way geologists approach many Earth science questions. Although recent research has focused on rapid sample throughput, acquisition rates are limited to 100–300 analyses h^?1. We present a method to acquire zircon U‐Pb dates at rates of 120, 300, 600 and 1200 analyses h^?1 (30, 12, 6 and 3 s per analysis) by multi‐collector LA‐ICP‐MS. We demonstrate the efficacy of this method by analysing twelve zircon reference materials with dates from ~ 3465 to ~ 28 Ma. Mean offset from high‐precision dates increases with faster rates from 0.9% to 1.1%; mean random 1s uncertainty increases from 0.6% to 1.3%. We tested this new method on a sandstone sample previously characterised by large‐n DZ geochronology. Quantitative comparison shows increased correspondence among age distributions comprising > 300 dates. This new method holds promise for DZ geochronology because (a) it requires no major changes to hardware, but rather modifications to software; (b) it yields robust age distributions well‐suited for quantitative analysis and maximum depositional age calculations; (c) there is only a minor sacrifice of accuracy and measurement uncertainty; and (d) there is less burden to researchers in terms of time investment and analytical cost.  相似文献   

Analysing uncertainties in climate change impact assessment across sectors and scenarios     

Calum Brown  Evan Brown  Dave Murray-Rust  George Cojocaru  Cristina Savin  Mark Rounsevell 《Climatic change》2015,128(3-4):293-306

  相似文献   

Consistency grammar for 3D indoor model checking     

Shayan Nikoohemat  Abdoulaye A. Diakit  Ville Lehtola  Sisi Zlatanova  George Vosselman 《Transactions in GIS》2021,25(1):189-212

Indoor 3D models are digital representations of building interiors reconstructed from scanned data acquired by laser scanners, digital depth (RGBD) cameras, and CAD drawings. Consequently, there is noise in the source data and a notable variety in the methods used to treat the noise and to process these data into reconstructed models. Alas, the correctness of these reconstructions and thus their suitability for a given application are uncertain. There is a lack of a robust base logic that would allow for controlling the consistency of these (automatically) generated models. Fortunately, correctness criteria are well‐defined through existing international standards. Hence, we propose a conceptual framework based on formal grammars to check the semantic, geometric, and topological consistency of a reconstructed 3D model. The proposed method proceeds in three steps to validate the model: (1) correctness checking of individual components; (2) consistency verification of instances’ interactions; and (3) model consistency check for targeted applications. Our method identifies the components in the model that violate the given rules derived from the current standards and expert knowledge. Ultimately, we propose a quantified formulation of our method that may be straightforwardly integrated into industrial‐level model checkers. The approach is independent of level of details and reconstruction method.  相似文献