Evaluation of riverbed magnetic susceptibility for mapping biogeochemical hot spots in groundwater-impacted rivers     

Chen Wang  Martin A. Briggs  Frederick D. Day-Lewis  Lee D. Slater 《水文研究》2021,35(5):e14184

Redox hot spots occurring as metal-rich anoxic groundwater discharges through oxic wetland and river sediments commonly result in the formation of iron (Fe) oxide precipitates. These redox-sensitive precipitates influence the release of nutrients and metals to surface water and can act as ‘contaminant sponges’ by absorbing toxic compounds. We explore the feasibility of a non-invasive, high-resolution magnetic susceptibility (MS) technique to efficiently map the spatial variations of magnetic Fe oxide precipitates in the shallow bed of three rivers impacted by anoxic groundwater discharge. Laboratory analyses on Mashpee River (MA, USA) sediments demonstrate the sensitivity of MS to sediment Fe concentrations. Field surveys in the Mashpee and Quashnet rivers (MA, USA) reveal several discrete high MS zones, which are associated with likely anoxic groundwater discharge as evaluated by riverbed temperature, vertical head gradient, and groundwater chemistry measurements. In the East River (CO, USA), widespread cobbles/rocks exhibit high background MS from geological ferrimagnetic minerals, thereby obscuring the relatively small enhancement of MS from groundwater induced Fe oxide precipitates. Our study suggests that, in settings with low geological sources of magnetic minerals such as lowland rivers and wetlands, MS may serve as a complementary tool to temperature methods for efficiently mapping Fe oxide accumulation zones due to anoxic groundwater discharges that may function as biogeochemical hot spots and water quality control points in gaining systems.  相似文献   

基于噪声谱比法的内蒙古西部地区台站场地响应研究     

张珂  王鑫  王树波  张红才  宋晓燕 《大地测量与地球动力学》2020,40(6):646-651

利用内蒙古西部12个台站的地脉动噪声数据，采用噪声谱比法研究台站的场地响应情况。分析表明，台站场地响应按曲线形态可分为3类，且可能受地形地貌、局部构造和台基状况等条件影响。对比分析噪声谱比法与Moya方法的场地响应结果发现，场地响应曲线形态基本一致，只有极少数台站存在明显差异。结果表明，内蒙古西部区域大部分台站的台基状况总体较好，场地响应曲线较为平坦，无明显频率放大点。  相似文献   

伏牛山地区森林生态系统服务权衡/协同效应多尺度分析   总被引：3，自引：0，他引：3  

张静静  朱文博  朱连奇  李艳红 《地理学报》2020,75(5):975-988

森林生态系统服务权衡与协同研究已成为当前相关学科的研究热点和前沿,对服务权衡与协同关系的多尺度分析有助于更加有效地实施森林资源管理。综合森林类型图、NDVI、气象和土壤等多源数据,借助CASA模型、InVEST 3.2模型和ArcGIS 10.2软件,开展伏牛山地区森林生态系统服务评估,运用空间叠置方法从多个空间尺度（区域、南北坡、垂直带）探讨服务权衡与协同效应。结果表明：① 研究区森林生态系统平均蓄积量为49.26 m ³/hm ²,碳密度为156.94 t/hm ²,供水深度为494.46 mm,土壤保持量为955.4 t/hm ²,生境质量指数为0.79。② 区域尺度上,28.79%的森林服务之间存在高协同效应,10.15%的森林存在低协同效应,61.06%的森林存在强权衡和弱权衡效应。③ 南北坡尺度上,南坡服务之间的协同关系优于北坡。垂直带尺度上,南坡中山落叶阔叶林带（SIII）服务之间协同关系最好,北坡低山落叶阔叶林带（NI）协同关系最差。  相似文献   

Modeling spatially non-stationary land use/cover change in the lower Connecticut River Basin by combining geographically weighted logistic regression and the CA-Markov model   总被引：2，自引：0，他引：2  

Hui Wang  Scott R. Stephenson  Shijin Qu 《International journal of geographical information science》2019,33(7):1313-1334

Simulating land use/cover change (LUCC) and determining its transition rules have been a focus of research for several decades. Previous studies used ordinary logistic regression (OLR) to determine transition rules in cellular automata (CA) modeling of LUCC, which often neglected the spatially non-stationary relationships between driving factors and land use/cover categories. We use an integrated geographically weighted logistic regression (GWLR) CA-Markov method to simulate LUCC from 2001–2011 over 29 towns in the Connecticut River Basin. Results are compared with those obtained from the OLR-CA-Markov method, and the sensitivity of LUCC simulated by the GWLR-CA-Markov method to the spatial non-stationarity-based suitability map is investigated. Analysis of residuals indicates better goodness of fit in model calibration for geographically weighted regression (GWR) than OLR. Coefficients of driving factors indicate that GWLR outperforms OLR in depicting the local suitability of land use/cover categories. Kappa statistics of the simulated maps indicate high agreement with observed land use/cover for both OLR-CA-Markov and GWLR-CA-Markov methods. Similarity in simulation accuracy between the methods suggests that the sensitivity of simulated LUCC to suitability inputs is low with respect to spatial non-stationarity. Therefore, this study provides critical insight on the role of spatial non-stationarity throughout the process of LUCC simulation.  相似文献   

An efficient and robust approach to predict ship self-propulsion coefficients     

《Applied Ocean Research》2019

Achieving a reliable and accurate numerical prediction of the self-propulsion performance of a ship is still an open problem that poses some relevant issues. Several CFD methods, ranging from boundary element methods (BEM) to higher-fidelity viscous Reynolds averaged Navier–Stokes (RANS) based solvers, can be used to accurately analyze the separate problems, i.e. the open water propeller and the hull calm water resistance. However, when the fully-coupled self-propulsion problem is considered, i.e. the hull advancing at uniform speed propelled by its own propulsion system, several complexities rise up. Typical flow simplifications adopted to speed-up the simulations of the single analysis (hull and propeller separately) lose their validity requiring a more complex solver to tackle the fully-coupled problem. The complexity rises up further when considering a maneuver condition. This aspect increases the computational burden and, consequently, the required time which becomes prohibitive in a preliminary ship design stage.The majority of the simplified methods proposed in literature to include propeller effects, without directly solve the propeller flow, in a high-fidelity viscous solver are not able to provide all the commonly required self-propulsion coefficients. In this work, a new method to enrich the results from a body force based approach is proposed and investigated, with the aim to reduce as much as possible the computational burden without losing any useful result. This procedure is tested for validation on the KCS hull form in self-propulsion and maneuver conditions.  相似文献   

联合BDS/GPS的北斗广域差分实时电离层延迟格网改正方法研究     

房成贺  陈俊平  兰孝奇  张磊 《大地测量与地球动力学》2019,39(2):169-177

研究并实现中国区域北斗广域差分实时电离层延迟格网改正算法，针对北斗单系统实时建立电离层延迟格网的不足，提出联合BDS/GPS的北斗广域差分实时电离层延迟改正方法。比较BDS、GPS以及BDS/GPS观测的实时电离层延迟格网，并利用北斗单频单点伪距定位进行精度验证。结果表明，在有效格网点覆盖充足的地区，BDS与GPS实时电离层延迟格网定位效果相当；而联合BDS/GPS观测的实时电离层延迟格网极大提高了偏远地区的单频定位精度与可定位历元数，也使原本单系统格网覆盖充足的地区定位效果得到进一步增强和稳定。  相似文献   

GPS/PWV时间序列特征提取方法的研究     

胡广保  叶世榕  张彦祥  夏朋飞  夏凤雨 《大地测量与地球动力学》2019,39(1):36-40

针对GAMIT/GLOBK软件解算得到的4 a GPS/PWV时间序列的特征提取问题，提出基于滤波辅助的部分集成经验模态分解（PEEMD）与Hilbert谱分析相结合的特征提取方法。首先，在PEEMD方法的基础上,结合滤波辅助的PEEMD方法与Hilbert谱分析，建立GPS/PWV时间序列特征提取模型；然后，将所提出的方法应用于TNML测站4 a的GPS/PWV长时间序列和7 d的GPS/PWV短时间序列分析中，并将滤波辅助的PEEMD结果与传统的小波分解结果进行对比。结果表明，该特征提取方法能准确有效地提取出 GPS/PWV时间序列中的周年周期和日周期特征分量，滤波辅助的PEEMD分解结果与小波分解结果一致，且提取的特征分量与原始信号更加吻合。  相似文献   

High‐Precision Measurement of 187Os/188Os Isotope Ratios of Nanogram to Picogram Amounts of Os in Geological Samples by N‐TIMS using Faraday Cups Equipped with 1013 Ω Amplifiers     

Guiqin Wang  Hauke Vollstaedt  Jifeng Xu  Wengui Liu 《Geostandards and Geoanalytical Research》2019,43(3):419-433

N(¹⁸⁷Os)/N(¹⁸⁸Os) ratios of six geological reference materials were measured using static Faraday cups (FCs) with 10¹³ Ω amplifiers by N‐TIMS. Our results show that the repeatability precision was 2–3‰ (2 RSD, n = 3), when taking ~ 1 g of BHVO‐2 with 76 pg g^?1 of Os mass fraction and ~ 2 g of BCR‐2 with 21 pg g^?1 of Os mass fraction for each sample, whether measured by FCs or by secondary electron multiplier. The repeatability precision measured by FCs was 1–0.2‰ (2 RSD, n = 3) when taking ~ 1 g of BIR‐2 with 350 pg g^?1 of Os mass fraction, ~ 1 g of WGB‐1 with 493 pg g^?1 of Os mass fraction or ~ 0.5 g of WPR‐1 with 13.3 ng g^?1 of Os mass fraction for each sample, which is much better than those measured by secondary electron multiplier. Instead, when taking ~ 2 g of AGV‐2 with 4 pg g^?1 Os mass fraction, the repeatability precision measured by secondary electron multiplier is 3–4‰ (RSD, n = 3), which is better than those measured by FCs. Of the six reference materials analysed, WPR‐1 and BIR‐1a are the most homogeneous with regard to Os isotopic composition (2 RSD of 0.08% and 0.23%, respectively) when test portion masses are 0.5–1 g.  相似文献   

基于平均分组和叠加相关的GPS信号捕获方法     

杨久东  吴风华  王文军 《大地测量与地球动力学》2018,38(8):828-831

针对目前GPS软件接收机C/A码捕获信噪比门限高、捕获速度慢的问题，提出一种基于平均分组和叠加相关的GPS弱信号捕获方法。首先，基于平均相关处理技术降低C/A码捕获过程中的自相关损耗，提高对微弱信号的捕获能力；然后，利用叠加相关提高相干运算的运算效率，并采用线性插值提高自相关函数性能；最后，利用频偏校正和内插进一步提高C/A信号的捕获精度。理论分析和仿真实验均验证，该方法能够在较低的信噪比下实现GPS信号捕获，且精度较高、运算量较低。  相似文献   

波段选择协同表达高光谱异常探测算法     

朱德辉  杜博  张良培 《遥感学报》2020,24(4):427-438

高光谱遥感影像具有光谱分辨率极高的特点,承载了大量可区分不同类型地物的诊断性光谱信息以及区分亚类相似地物之间细微差别的光谱信息,在目标探测领域具有独特的优势。与此同时,高光谱遥感影像也带来了数据维数高、邻近波段之间存在大量冗余信息的问题,高维度的数据结构往往使得高光谱影像异常目标类和背景类之间的可分性降低。为了缓解上述问题,本文提出了一种基于波段选择的协同表达高光谱异常探测算法。首先,使用最优聚类框架对高光谱波段进行选择,获得一组波段子集来表示原有的全部波段,使得高光谱影像异常目标类与背景类之间的可分性增强。然后使用协同表达对影像上的像元进行重建,由于异常目标类和背景类之间的可分性增强,对异常目标像元进行协同表达时将会得到更大的残差,异常目标像元的输出值增大,可以更好地实现异常目标和背景类的分离。本文使用了3组高光谱影像数据进行异常目标探测实验,实验结果表明,该方法与其他现有高光谱异常目标探测算法对比,曲线下面积AUC(Area Under Curve)值更高,可以更好地实现异常目标与背景分离,能够更有效地对高光谱影像进行异常目标探测。  相似文献