Three‐dimensional shakedown solutions for anisotropic cohesive‐frictional materials under moving surface loads     

Juan Wang  Hai‐Sui Yu 《国际地质力学数值与分析法杂志》2014,38(4):331-348

Previous work on three‐dimensional shakedown analysis of cohesive‐frictional materials under moving surface loads has been entirely for isotropic materials. As a result, the effects of anisotropy, both elastic and plastic, of soil and pavement materials are ignored. This paper will, for the first time, develop three‐dimensional shakedown solutions to allow for the variation of elastic and plastic material properties with direction. Melan's lower‐bound shakedown theorem is used to derive shakedown solutions. In particular, a generalised, anisotropic Mohr–Coulomb yield criterion and cross‐anisotropic elastic stress fields are utilised to develop anisotropic shakedown solutions. It is found that shakedown solutions for anisotropic materials are dominated by Young's modulus ratio for the cases of subsurface failure and by shear modulus ratio for the cases of surface failure. Plastic anisotropy is mainly controlled by material cohesion ratio, the rise of which increases the shakedown limit until a maximum value is reached. The anisotropic shakedown limit varies with frictional coefficient, and the peak value may not occur for the case of normal loading only. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Coordinative similitude law considering fluid‐structure interaction for underwater shaking table tests     

Zhong‐Xian Li  Kun Wu  Yundong Shi  Ning Li  Yang Ding 《地震工程与结构动力学》2018,47(11):2315-2332

Generally, when a model is made of the same material as the prototype in shaking table tests, the equivalent material density of the scaled model is greater than that of the prototype because mass is added to the model to satisfy similitude criteria. When the water environment is modeled in underwater shaking table tests, however, it is difficult to change the density of water. The differences in the density similitude ratios of specimen materials and water can affect the similitude ratios of the hydrodynamic and wave forces with those of other forces. To solve this problem, a coordinative similitude law is proposed for underwater shaking table tests by adjusting the width of the upstream face of the model or the wave height in the model test to match the similitude ratios of hydrodynamic and wave forces with those of other forces. The designs of the similitude relations were investigated for earthquake excitation, wave excitation, and combined earthquake and wave excitation conditions. Series of numerical simulations and underwater shaking table tests were performed to validate the proposed coordinative similitude law through a comparison of coordinative model and conventional model designed based on the coordinative similitude law and traditional artificial mass simulation, respectively. The results show that the relative error was less than 10% for the coordinative model, whereas it reached 80% for the conventional model. The coordinative similitude law can better reproduce the dynamic responses of the prototype, and thus, this similitude law can be used in underwater shaking table tests.  相似文献   

油页岩资源评价关键参数及其求取方法   总被引：6，自引：0，他引：6  

董清水  王立贤  于文斌  刘招君  张海龙  厚刚福 《吉林大学学报(地球科学版)》2006,36(6):899-903

资源评价关键环节之一就是评价参数标准的确定和求取。全国首次油页岩资源评价结果表明:油页岩质量评价关键参数主要有含油率(ω)、干燥基的灰分(Ag)、干燥基的低位发热量(QgDW)及干燥基的全硫含量(SgQ);油页岩资源量评价关键参数包括矿层可采厚度(H)、矿体有效面积(S)、矿体体重(D)、矿体资源类型等。不同参数的意义和评价标准不同,在表征单个工程控制点、块段油页岩体或单层油页岩等不同地质特征时,各参数的求取方法、计算公式有一定的差异性。进行油页岩资源评价时,应根据不同的目的选取不同的参数和计算方法。  相似文献   

基于Hoek-Brown的岩石横观各向同性屈服准则研究     

郑艳妮  张强  张升  贾朝军  雷明锋 《岩土力学》2022,(1):139-151

为了描述岩石强度的各向异性特征,通过引入材料的微结构张量,考虑单轴抗压强度σ_cβ随层理倾角β而变化,提出了基于微结构张量的修正Hoek-Brown屈服准则。开展不同层理倾角(0°、15°、30°、45°、60°、75°和90°)的页岩试样不同围压(0、5、10、15和20 MPa)下的三轴压缩试验,结果显示,页岩峰值强度与层理倾角β呈"U"形曲线关系,在围压较低时呈"肩"形曲线关系,弹性模量E_t和泊松比ν对围压不敏感,其平均值随层理倾角β的变化关系分别呈倒"U"形、"肩"形。页岩的微观和宏观破坏图像表明,其破坏模式受围压和层理倾角双重控制。试验值与模型预测值的对比表明,修正的Hoek-Brown屈服准则可较好地对页岩强度的各向异性进行模拟。同时,采用Koteshwar千枚岩、Koteshwar板岩、绿泥石片岩等层状结构岩石的单轴和三轴压缩试验数据,进一步验证了提出的修正Hoek-Brown屈服准则对多数具有层理结构的横观各向同性岩石峰值强度模拟具有普遍适用性,并对屈服准则在试验数据较多和较少情况下的峰值强度模拟效果进行了评价。  相似文献   

复数域总体最小二乘平差   总被引：1，自引：1，他引：0  

王乐洋  于冬冬  吕开云 《测绘学报》2015,44(8):866-876

在复数域最小二乘的基础上提出了复数域总体最小二乘平差方法,推导了复数域总体最小二乘和复数混合总体最小二乘的相关公式。通过算例比较分析了复数观测值的残差的模的平方和最小(平差准则1)下及残差的实部和虚部的平方和分别最小(平差准则2)下的复数最小二乘、复数观测值和系数矩阵的残差的模的平方和最小(平差准则3)下及残差的实部和虚部的平方和分别最小(平差准则4)下的复数总体最小二乘方法的优劣。试验结果表明:平差准则1下复数最小二乘较平差准则2下得到的结果更加合理,平差准则3下复数总体最小二乘较平差准则4下得到的结果更为准确;当顾及系数矩阵误差时,平差准则3下复数总体最小二乘要优于平差准则1下复数最小二乘。  相似文献   

海底爆破振动强度衰减规律及中华白海豚保护措施研究     

费鸿禄  关福晨  包士杰  肖绍青 《海洋通报》2019,38(4):405-414

为确保海底爆破施工所诱发的振动不对中华白海豚造成危害,基于量纲分析法对萨道夫斯基经验公式进行修正,建立适用于预测海底爆破质点峰值振动速度的相似准数方程。在此基础上根据现场试验数据进行非线性回归运算,得到相关参数并分析了海底爆破振动强度衰减规律。分析表明:海底爆破质点峰值振速主要由单段装药量、监测点距爆心水平距离、覆盖层厚度及海水深度等因素决定。将参数值分别代入萨氏公式及新建公式计算预测值并进行误差估计,其平均误差分别为20.3%和10.0%,新建公式提高了对质点振速预测的准确性。利用新建公式及超压内安全振速估算保护中华白海豚的安全距离并提出相应的保护措施,为同类工程施工提供理论参考依据。  相似文献   

考虑劣化屈服老化裂纹后混凝土水库堤坝排水边坡抗震性研究          下载免费PDF全文

石晶  李伟 《地震工程学报》2019,41(6):1506-1513

针对在水库堤坝排水边坡混凝土裂纹的抗震性研究中,未考虑岩土体抗剪强度参数的劣化屈服效应以及混凝土裂纹的老化,存在抗震性判断结果准确率较差等问题,提出水库堤坝排水边坡混凝土考虑老化后产生裂纹的抗震性能研究方法。模拟强震下边坡混凝土的开裂破坏过程,根据D-P屈服准则,实现对闸墩混凝土材料的屈服判断。采用薄层整体单元模拟和分离式裂纹单元,实现混凝土裂纹的数值模拟,加载地震波后,获取混凝土裂纹的强震响应规律与破坏特征。实验结果可知,本文方法对坝体位移变化的研究精度高,得到的混凝土裂纹扩展范围更为准。运用本文方法对水库堤坝排水边坡混凝土的抗震性研究准确率以及可信度较高,说明本文方法具有一定的可取性。  相似文献   

基于DFT模型的大场景InSAR图像配准     

韦顺军  唐欣欣  张晓玲 《遥感学报》2019,23(5):859-870

图像配准是实现干涉合成孔径雷达(InSAR)高精度相位提取及地形高程反演的关键,大场景图像的高效高精度配准成为近年高分宽幅InSAR成像应用研究的难点问题之一。由于大场景图像中不同区域偏移量及变化规律差异较大,传统最大相干系数配准方法需多分块及插值处理,面临计算量大且配准精度低等问题。针对此问题,本文提出一种基于DFT模型的大场景InSAR高效高精度图像配准算法。该方法利用最小均方差准则构建InSAR复图像配准的DFT模型,采用四叉树自适应分块及矩阵相乘DFT快速重采样配准方法,实现大场景InSAR图像各子块区域的高效高精度亚像素配准。仿真和实测数据验证本文算法的有效性,结果表明该算法不仅可实现大场景InSAR复图像亚像素级配准,还具有较高的运算效率,其运算效率相对于传统FFT配准方法通常可提升3倍以上。  相似文献   

Stability analysis of tunnels driven in jointed rocks by means of a homogenized limit analysis approach     

Samir Maghous  José E. B. Winiawer  Vanessa F. Pasa Dutra 《国际地质力学数值与分析法杂志》2014,38(18):2009-2032

Conceived as a potential alternative to the classical design methods employed for analyzing the stability of underground structures driven in jointed rocks, the homogenization approach stems from the heuristic idea that, from a macroscopic point of view, a rock mass cut by a network of joints may be perceived as a homogenized continuum. The strength properties of the latter can be theoretically obtained from the failure conditions of its individual constituents: rock matrix and joint interfaces. At the material level, the limit analysis reasoning is used in the context of homogenization to formulate the homogenized strength criterion of a jointed rock mass in the particular situation of a single set of parallel joints. As it could be expected, the obtained closed‐form expressions show the strength anisotropy induced by joint preferential orientation. The support functions (π functions) associated with the homogenized strength criterion are also determined in both plane strain and three‐dimensional cases. This criterion is then applied to the investigation of stability analysis of a tunnel excavated in a jointed rock mass. Upper bounds estimated of the stability factor are derived from the implementation of the kinematic approach directly on the homogenized underground structure. Finally, the approach is applied to analyze and discuss the collapse of the Pinheiros subway station (São Paulo, Brazil). Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

端帮开采下煤柱破坏宽度计算及失稳机制研究     

王瑞  闫帅  柏建彪  常治国  宋远霸 《岩土力学》2019,40(8):3167-3180

针对大型露天矿开采后残存的大量端帮滞留煤进行开采时，确定留设支撑煤柱的合理宽度一直是端帮采煤工艺高效应用推广的突出难题。将端帮开采工作面假定为无限大板上相隔一定间距的共线裂纹，基于断裂力学Ⅰ-Ⅱ复合型裂纹模型，运用Hoek-Brown与Mohr-Coulomb破坏准则，分析了支撑煤柱边缘的应力分布规律，建立了支撑煤柱边缘破坏区的边界方程，进而得到了不同破坏准则下支撑煤柱破坏宽度的表达式。结合不同破坏准则下支撑煤柱破坏宽度的理论表达式与煤体破坏间所确定的表征其不同状态的3组特征参数，进行了曲线规律显现。依据不同破坏准则下所显现的曲线规律，分析了留设煤柱宽度 、采硐宽度 、煤层埋深H及煤层倾角 等独立因素对支撑煤柱破坏宽度 的影响规律，同时将工程实例数据分别代入不同准则下所得的理论表达式。理论结果和实测数据表明，Hoek-Brown破坏准则的运用更为符合现场煤柱破坏演化规律及适合节理岩体破坏的分析。此外，结合煤柱稳定性研究中的极限破坏理论和渐近破坏理论，描述了煤柱失稳破坏机制及过程。为端帮开采中支撑煤柱的合理宽度设计及煤柱破坏的理论分析中的准则运用提供了新思路，为推广端帮开采工艺的应用提供指导意义。  相似文献