Coastal ridge constructive processes at a multi-decadal scale in Barreta Island (southern Portugal)     

Xabier Herrero  Susana Costas  Katerina Kombiadou 《地球表面变化过程与地形》2020,45(2):411-423

Multiple ridges across prograding coasts may display variable geometries, commonly expressed through varying elevations. Changes in ridge elevation have been traditionally related to the occurrence of fluctuating progradation rates, which might, in turn, be driven by shifting environmental conditions. Here, we explore the geometry and growth mechanisms of multiple ridges, generated at Barreta Island (Ria Formosa, southern Portugal), as a consequence of the rapid progradation of the island over the last 70 years, following the artificial fixation of the downdrift Faro-Olhão inlet with jetties in 1955. The variability in the morphology of these features was analysed in combination with available wind and wave data, in order to better distinguish growth mechanisms and understand the main parameters determining the final geometry of the observed ridges. The results suggest that (1) most of the identified ridges fall in the beach ridge classification, as they have been mostly built by marine processes, and (2) the parameters derived from, or closely related to wave climate variability (e.g. progradation rates, storm occurrence) can jointly explain most of the observed morphological changes, while aeolian processes played a secondary role. Indeed, ridge geometry appears mainly controlled by progradation rates, with higher ridges associated with lower progradation rates. Progradation rate, in turn, is mostly related to longshore wave power, storminess, and the occurrence storm groups. Yet, the final configuration of ridges can also be affected by runup levels and onshore winds. Therefore, establishing the relation between ridge geometry and wave climate is not a straightforward task, because of the complex processes and interactions that control coastal morphodynamics. © 2019 John Wiley & Sons, Ltd.  相似文献   

高分辨率反射波地震勘探在城市隐伏断裂探测中的应用——以成都天府新区苏码头断裂为例     

刘远志  刘胜  李大虎  夏友钢  李颖  周德帅 《大地测量与地球动力学》2019,39(9):910-915

采用“三小三高二绝招”的工作方法，通过静校正、多域多方法联合噪音衰减和精细的速度分析获得较高分辨率的地震时间剖面，揭示苏码头断裂的展布位置、构造形态及变形样式等。结果表明，区域构造以冲起式为主，在反冲断层与逆冲断层之间形成冲起构造或逆冲三角构造，在地震剖面上有明显的楔状特征。通过地震测线的断层走向以NE为主，倾向以SE为主，部分断层倾向为NW。  相似文献   

辽河盆地西部凹陷古近系沙四上亚段沉积相及演化     

王夏斌  姜在兴  胡光义  范廷恩  王俊辉  卢欢 《吉林大学学报(地球科学版)》2019,49(5):1222-1234

薄互层砂体研究是湖盆沉积学的研究难点。本文针对辽河西部凹陷沙四上亚段（Es^4上）薄互层砂体，以层序地层学、沉积学、测井地质学等理论为指导，综合岩心、测录井和地震等多种资料，对西部凹陷的薄互层砂体进行精细描述和深入剖析。结果表明，研究区主要发育辫状河三角洲和湖泊沉积相，其中，滩坝砂体是湖泊相的主力砂体。通过考虑不同沉积背景下滩坝在岩相组合、发育位置和成因机理的差异性，将滩坝划分成侧缘改造型滩坝、前缘改造型滩坝、基岩改造型滩坝、淹没改造型滩坝和风暴改造型滩坝5种沉积模式；对薄层滩坝砂体的控制因素进行分析，认为其受到"风场-物源-盆地"三端元的控制。  相似文献   

海域金矿找矿方法研究——以山东省莱州市三山岛北部海域金矿为例     

田振环 《地质学报》2019,93(S1):19-28

莱州市三山岛北部海域金矿区是世界上第一个查明的海域岩金矿。它通过追索延伸至海域的三山岛断裂，圈定破金找矿靶区。利用海域高精度磁测和浅地层剖面测量配合海上钻探，找到了海域大型金矿。以三山岛海域金矿普查为依托，研究出来的这套海域金矿找矿方法和海上钻探平台，可为今后开展海域金及其它与断裂有关的矿产资源找矿，提供指导和借鉴。  相似文献   

A finite element approach for predicting the full resistance profile of a spudcan deeply penetrating in dense sand overlying clay     

《Applied Ocean Research》2019

This paper presents a finite element approach to calculate the full resistance profile of a spudcan deeply penetrating in dense sand overlying clay, in which a potential for an installing spudcan to experience a sudden uncontrolled punch-through failure exists. A modified Mohr-Coulomb model characterized by incorporating a four-phase variation of the mobilized strength and dilation parameters with an equivalent accumulated plastic strain is developed and tested for the overlying dense silica sand. An extended Tresca model is used for the strain softening of the underlying clay. A series of large deformation finite-element (LDFE) analyses are carried out, varying the strength and dilation parameters as well as the spudcan geometries. A fairly good performance of the present approach is verified by validating against groups of centrifuge tests data, allowing the numerical study to be extended parametrically. The four-phase variation of the mobilized strength and dilation parameters involved in the progressive failure of the upper dense sand is parametrically studied and extended to cover the range of sand relative densities that are of practical interest. Additionally, comparisons with the typical existing LDFE analyses using both simple and sophisticated constitutive models are carried out. It shows that the present approach performs fairly well to calculate the full resistance profile of a spudcan deeply penetration in both thin and thick dense sand overlying clay, especially the peak and post-peak resistance, within around 5% of the corresponding centrifuge tests results.  相似文献   

胶莱盆地在南黄海的延伸:来自OBS深地震探测的新证据     

祁江豪  吴志强  张训华  侯方辉 《吉林大学学报(地球科学版)》2019,49(1):106-114

为了识别胶莱盆地海阳凹陷在南黄海地区的东部延伸边界，利用穿越南黄海的OBS2013-SYS深地震测线开展2D速度结构模拟，在测线NW方向位于千里岩隆起带的OBS（海底地震仪）站位均观察到了折合走时突然增加的现象。速度结构模型显示胶莱盆地东侧海阳凹陷附近海域存在明显的低速沉积层增厚现象，模型自OBS06站位向NW方向，沉积层厚度由小于1.0 km显著增厚至2.5 km左右，推测该处为胶莱盆地海阳凹陷的东部边界断裂。结合前人在海阳凹陷识别出的控盆断裂进行分析，厘定了海阳凹陷在海区大体的构造边界和沉积中心，认为胶莱盆地东部控盆断裂可能延伸至连云港-石岛断裂一线，与嘉山-响水-千里岩断裂构成千里岩隆起带南北边界断裂带的一部分。海阳凹陷沉降中心可能位于南黄海海区连云港-石岛断裂北侧海阳凹陷的NE方向，发育的厚层白垩系可能存在较好的油气前景。  相似文献   

改进的最小曲率迭代法在重力剖面数据插值中的应用     

朱文武  彭军还  高艳龙  李方舟  贾玥 《大地测量与地球动力学》2019,39(8):810-812

基于将约束点也作为待解算结点的思想，对传统最小曲率迭代法进行改进。改进后的方法在待解算结点周围存在约束点时，避免了根据约束点与待解算结点之间的不同关系需要进行分类推导的复杂过程，同时也避免了因使用泰勒展开式进行分解造成的精度损失，提高了解算精度。  相似文献   

Modification and discussion of the Green-Ampt model for an evolving wetting profile   总被引：1，自引：0，他引：1  

Qiyong Zhang  Yuzhen Kong 《水文科学杂志》2020,65(12):2072-2082

ABSTRACT

The Green-Ampt (GA) model has been widely used to evaluate soil water infiltration. While a simple piston profile is commonly used, the wetting profile of a soil changes during infiltration and a quarter-ellipse has been found to better describe its evolution. This study aims to improve the GA model and discuss the model parameters when the quarter-ellipse profile is utilized. The soil column is divided into three zones: saturated, transient and dry. The variable γ is introduced to express the ratio of the saturated zone depth to the wetting front depth. A modified GA model is derived via mathematical methods, but an exact solution is difficult to obtain. Therefore, a simplified (SGA) model is developed via a segmented method. Compared with the measured results, the SGA model is more accurate than the traditional model. Finally, the model parameters are discussed and a value of γ = 0.5 is recommended.  相似文献   

黄土高原沟谷地貌发育演化研究进展与展望     

熊礼阳  汤国安 《地球信息科学学报》2020,22(4):816-826

黄土沟谷是黄土地貌中最有活力、最具变化、最富特色的对象单元,黄土高原千沟万壑的地貌形态以及触目惊心的侵蚀状态也让区域内沟谷地貌的形成、发育及演化问题成为研究中焦点及前沿性科学问题。近年来,诸多学者采用地学测年法、特征表达法、监测模拟法力图实现对黄土沟谷发育演化进程中“过去-现代-未来”的科学认知。这些研究在相当程度上丰富了黄土沟谷发育过程的认知。本文梳理了黄土高原沟谷地貌演化相关研究的现状,并从黄土高原地貌演化、黄土沟谷发育、基于DEM的沟谷信息提取与表达等研究进行了系统的回顾、梳理与分析。此外,本文提出“黄土沟道剖面群组”概念与方法,试图从新的视角审视黄土沟谷地貌发育演化过程。沟道剖面在黄土沟谷发育演化进程中传递物质能量和累积地形动力,并通过径流节点的串联实现剖面群的连接与组合,形成独特的剖面“群组”模式;该沟道剖面群组是集黄土沟谷地貌特征与过程于一体的综合信息集成体,其三维空间结构是对黄土沟谷地貌发育演化的高度抽象与映射,并可望进一步丰富黄土高原数字地形分析理论与方法体系,为黄土高原黄土地貌成因机理与空间分异格局带来创新的认识。  相似文献   

煤层气井产出剖面测试技术及应用     

张雷  樊洪波  侯伟  张伟  郝帅  孙晓光 《吉林大学学报(地球科学版)》2020,50(2):617-626

现有常规油气井产出剖面测试方法在煤层气井中适应性较差，测试范围和测量工艺等存在局限性，施工成功率低。因此，本文对煤层气井产出剖面测试技术进行了整体的系统化设计和研发。通过紧凑的结构设计、高度集成，研发了一套可同时进行温度、压力、磁性定位、热式流量、探针持气率、微波持气、涡轮流量和超声流量等多参数测量的煤层气井测井仪，并研制了一套一次下井可进行多种测试技术测量的煤层气井产出剖面测试技术。同时提高了测试仪器的精度和抗干扰能力，开发了多任务多窗口的便携地面系统操作，并研制新型偏心测试井口应用于煤层气井，实现修井作业时不间断连续测试。该技术在鄂尔多斯盆地石楼北区块3口煤层气井进行了现场试验，取得精确、连续的测试数据。测试结果显示，石楼北区块8^#+9^#煤层为主力产气、产水层。  相似文献