基于国家海洋治理和全球气候变化的我国海洋灾害防治          下载免费PDF全文

齐庆华 《海洋开发与管理》2019,36(2):17-23

为建立和完善现代化的海洋灾害防治体系,提高我国海洋治理和应对全球气候变化的能力,文章以全球治理和国家治理为背景,在明确致灾因子、承灾体、灾害以及灾害风险和管理等基本概念及其内涵的基础上,分析全球气候变化背景下我国海洋灾害及其风险的特征以及海洋灾害防治的关键性和基础性科学问题,并提出我国构建海洋灾害防治体系的建议。研究结果表明:在全球气候变化的影响下,我国沿海地区的海洋灾害风险复杂多变且有所提升;提出以群-环-域为主体的体系架构,研究全球气候变化与区域海洋的响应和反馈、全球气候变化背景下海洋灾害与风险的特征和规律以及综合海洋灾害风险评估和海洋灾害防治等问题;在我国构建海洋灾害防治体系的过程中,应加强科学研究以及技术和信息支撑、促进区域和全球联动联防以及提高全社会对海洋灾害的认知和防范水平。  相似文献   

A finite element approach for predicting the full resistance profile of a spudcan deeply penetrating in dense sand overlying clay     

《Applied Ocean Research》2019

This paper presents a finite element approach to calculate the full resistance profile of a spudcan deeply penetrating in dense sand overlying clay, in which a potential for an installing spudcan to experience a sudden uncontrolled punch-through failure exists. A modified Mohr-Coulomb model characterized by incorporating a four-phase variation of the mobilized strength and dilation parameters with an equivalent accumulated plastic strain is developed and tested for the overlying dense silica sand. An extended Tresca model is used for the strain softening of the underlying clay. A series of large deformation finite-element (LDFE) analyses are carried out, varying the strength and dilation parameters as well as the spudcan geometries. A fairly good performance of the present approach is verified by validating against groups of centrifuge tests data, allowing the numerical study to be extended parametrically. The four-phase variation of the mobilized strength and dilation parameters involved in the progressive failure of the upper dense sand is parametrically studied and extended to cover the range of sand relative densities that are of practical interest. Additionally, comparisons with the typical existing LDFE analyses using both simple and sophisticated constitutive models are carried out. It shows that the present approach performs fairly well to calculate the full resistance profile of a spudcan deeply penetration in both thin and thick dense sand overlying clay, especially the peak and post-peak resistance, within around 5% of the corresponding centrifuge tests results.  相似文献   

祁连山北部基岩河道宽度对构造和岩性的响应     

李琼  秦冰雪  潘保田 《第四纪研究》2020,(1):132-147

活动造山带基岩河流地貌研究,目前已成为构造地貌学研究的前沿和热点。河道宽度形态的调整变化是基岩河流响应构造、岩性和气候等扰动的重要方式之一。通过研究祁连山北部地区6个重点流域基岩河道的宽度形态发现:河道宽度总体上呈现出东西向和南北向的变化特征,河道向下游增宽的速率,东段地区显著高于中段地区,低山带显著高于高山带;对比河道宽度的变化特征与构造抬升速率及岩性抗蚀性的变化,可以推断:在祁连山北部地区,基岩河道宽度响应构造抬升和岩性抗蚀性的变化进行了系统地调整,构造抬升控制了流域河道宽度变化的总体趋势,而岩性抗蚀性变化则导致了流域内部局部河段河道宽度的大幅波动。在祁连山北部地区开展的基岩河道宽度形态研究,为利用基岩河道形态研究造山带的构造变形奠定了基础,对于探索构造抬升背景下地貌的发育过程具有十分重要的意义。  相似文献   

盾构隧道下穿管道施工引起的管-土相互作用研究     

可文海  管凌霄  刘东海  邓建林  李科  徐长节 《岩土力学》2020,41(1):221-228

采用Loganathan公式研究了盾构隧道下穿管道施工引起的地下管道处土体竖向位移，利用考虑土中剪力传递的Pasternak模型模拟管-土相互作用，运用修正Vlasov模型中的迭代流程计算出Pasternak模型的关键参数——弹性系数k与剪切系数gs。将计算结果与已有文献结果及工程监测数据进行对比，深入分析了迭代求解k、gs值的Pasternak模型与传统模型的计算差异，并进一步研究了土中剪力、管道与隧道的夹角、土体弹性模量及隧道半径的变化对管-土相互作用的影响。研究结果表明：迭代求解的k、gs值能提升Pasternak模型的精确度；土中剪力对管道竖向位移计算值的影响可达15.3%；随着管道与隧道夹角的减小，管道的竖向位移增大、弯矩减小；土体弹性模量与隧道半径的增大均会增加管道的竖向位移和弯矩。  相似文献   

自由段先注浆对预应力锚索抗拔试验结果影响研究     

杨庆光  柳雄  刘杰  何杰  梁凌川  陈斌 《岩土力学》2020,41(10):3317-3325

为了解决无法采用已注浆锚索进行抗拔试验问题，基于界面脱黏剪切模型，利用荷载传递和弹性变形理论，考虑锚索锚固段与自由段长度比Lb /La的影响，建立了采用自由段已注浆锚索抗拔试验结果评价锚索抗拔性能的方法。结果表明：自由段注浆对锚索抗拔力有较大幅度的提高，尤其是当界面剪切阶段由弹性向脱黏过渡时，提高比例快速增加，并在脱黏后逐渐趋于稳定。其次，锚索自由段与锚固段交界面处剪切位移和轴力最大，并向两端逐渐降低。随着拉拔力的提高，界面剪切位移和轴力都不断增大，同时向锚索两端的衰减速度也加快。此外，弹性阶段时剪应力曲线为山峰型，而脱黏阶段为马鞍型，并随抗拔力的提高，马鞍开口逐渐扩大。最后，锚固段与自由段长度比Lb /La对锚索极限抗拔力的影响较小，其极限抗拔力折减系数?Q取值介于0.81～0.83之间，且Lb /La =2.5时，?Q计算值仅比实测结果小6.02%，验证了本文方法的可行性。  相似文献   

Analysis of resistance factors for LRFD of soil nail pullout limit state using default FHWA load and resistance models     

Hui Hu 《Marine Georesources & Geotechnology》2020,38(3):332-348

Abstract

Resistance factors for load and resistance factor design (LRFD) of pullout limit state of both permanent and temporary soil nails are calibrated against a wide design space using the current Federal Highway Administration (FHWA) nail load and resistance models. The calculated resistance factors were shown to scatter broadly among design scenarios that differ in wall face batter, soil friction angle, nail ultimate bond strength, and surcharge live load. An important lesson learned from the analysis results is that the current practice of using a single resistance factor for LRFD of nail pullout limit state could not result in uniform reliabilities across different design scenarios. Simple artificial neural network (ANN) models were developed for computation of resistance factors. Design examples demonstrated the ability of the ANN models in providing resistance factors that yield satisfactory and consistent reliabilities in different nail pullout designs.  相似文献   

饲料中添加芽孢杆菌组分对凡纳滨对虾幼虾生长、能量代谢和抗WSSV能力的影响     

单洪伟  于鹏  刘宽  于明超  马甡 《中国海洋大学学报(自然科学版)》2020,(1):30-38

以凡纳滨对虾(Litopnnaus vannamei)幼虾为实验动物,在其基础饲料中分别添加芽孢杆菌(Bacillus sp.)胞外蛋白粗提物(1.0%,胞外蛋白组)、胞内多糖粗提物(1.0%,胞内多糖组),以基础饲料为对照组饲料,进行为期28d的养殖实验,探讨芽孢杆菌胞外蛋白和胞内多糖粗提物对幼虾生长、能量代谢及抗病能力的影响。研究表明,芽孢杆菌2种粗提物对凡纳滨对虾的生长和成活率影响不显著(P>0.05)。饲喂2种粗提物影响了凡纳滨对虾肝胰腺和肌肉中能量代谢相关酶活力。胞外蛋白组肝胰腺中磷酸果糖激酶(PFK)、乳酸脱氢酶(LDH)活力在养殖实验前期显著高于对照组(P<0.05),而肌肉中PFK、LDH活力显著低于对照组(P<0.05);胞内多糖组肝胰腺中己糖激酶(HK)活力及肌肉中PFK、LDH活力显著低于对照组(P<0.05)。饲喂2种粗提物均显著提高了凡纳滨对虾肌肉中琥珀酸脱氢酶(SDH)活力和肝胰腺中电子传递系统(ETS)活力(P<0.05),胞外蛋白粗提物对肝胰腺中的SDH活力也有显著的提高作用(P<0.05)。饲喂2种粗提物显著降低了凡纳滨对虾肝胰腺及肌肉组织中脂肪酸合酶(FAS)含量(P<0.05)。此外,饲喂2种粗提物均会显著提高凡纳滨对虾肠道蛋白酶活力(P<0.05),而胞外蛋白粗提物使凡纳滨对虾肠道脂肪酶活力显著降低(P<0.05)。白斑综合征病毒(WSSV)感染后,与对照组相比,胞外蛋白组和胞内多糖组凡纳滨对虾半致死时间分别延长了26.19%和7.14%。根据以上结果推测,芽苞杆菌2种粗提物能够影响凡纳滨对虾能量代谢水平并提高其抗WSSV能力,且二者之间密切相关。  相似文献   

山区阶梯式河道水流阻力研究   总被引：1，自引：0，他引：1       下载免费PDF全文

罗铭  张焕  丁锐  黄尔  杨奉广 《水科学进展》2019,30(5):719-726

山区阶梯式河道是自然界来水来沙和山区大比降河床相互作用所形成的，其水力特性、河道阻力较为复杂。为了深入研究其阻力机理，从河床结构阻水的角度提出阶梯式结构糙率尺度的概念，得到了适用于阶梯式河道跌落水流的形体阻力系数表达式，并由不同来源的阻力分量构成了新的山区阶梯式河道水流总阻力系数公式。新公式结果表明，通过不同类型河段的野外试验数据，表面泥沙、阶梯形状以及漂石产生的阻力系数分量之和与试验测量总阻力系数数据的误差较小。随着雷诺数和阶梯单元尺寸的增加，河床表面的泥沙肤面阻力系数基本不变，阶梯式结构形成的跌落水流过渡到滑行水流，阶梯形体阻力系数逐渐变小，而较大粒径松散漂石产生的水流阻力系数只随着雷诺数的增大而减小。  相似文献   

Quantifying flow resistance in mountain streams using computational fluid dynamics modeling over structure-from-motion photogrammetry-derived microtopography     

Yunxiang Chen  Roman A. DiBiase  Nicholas McCarroll  Xiaofeng Liu 《地球表面变化过程与地形》2019,44(10):1973-1987

Flow resistance in mountain streams is important for assessing flooding hazard and quantifying sediment transport and bedrock incision in upland landscapes. In such settings, flow resistance is sensitive to grain-scale roughness, which has traditionally been characterized by particle size distributions derived from laborious point counts of streambed sediment. Developing a general framework for rapid quantification of resistance in mountain streams is still a challenge. Here we present a semi-automated workflow that combines millimeter- to centimeter-scale structure-from-motion (SfM) photogrammetry surveys of bed topography and computational fluid dynamics (CFD) simulations to better evaluate surface roughness and rapidly quantify flow resistance in mountain streams. The workflow was applied to three field sites of gravel, cobble, and boulder-bedded channels with a wide range of grain size, sorting, and shape. Large-eddy simulations with body-fitted meshes generated from SfM photogrammetry-derived surfaces were performed to quantify flow resistance. The analysis of bed microtopography using a second-order structure function identified three scaling regimes that corresponded to important roughness length scales and surface complexity contributing to flow resistance. The standard deviation σ_z of detrended streambed elevation normalized by water depth, as a proxy for the vertical roughness length scale, emerges as the primary control on flow resistance and is furthermore tied to the characteristic length scale of rough surface-generated vortices. Horizontal length scales and surface complexity are secondary controls on flow resistance. A new resistance predictor linking water depth and vertical roughness scale, i.e.  H/σ_z, is proposed based on the comparison between σ_z and the characteristic length scale of vortex shedding. In addition, representing streambeds using digital elevation models (DEM) is appropriate for well-sorted streambeds, but not for poorly sorted ones under shallow and medium flow depth conditions due to the missing local overhanging features captured by fully 3D meshes which modulate local pressure gradient and thus bulk flow separation and pressure distribution. An appraisal of the mesh resolution effect on flow resistance shows that the SfM photogrammetry data resolution and the optimal CFD mesh size should be about 1/7 to 1/14 of the standard deviation of bed elevation. © 2019 John Wiley & Sons, Ltd.  相似文献   

基于MCR模型和DO指数的九江滨水城市生态安全网络构建   总被引：1，自引：1，他引：0  

戴璐  刘耀彬  黄开忠 《地理学报》2020,75(11):2459-2474

兼顾生态保护和经济增长的生态安全网络对引导滨水城市走可持续发展道路具有重要指导意义。本文以九江市为例,采用景观生态数据集和产业信息数据集,结合最小累积阻力模型（MCR）和连续空间的产业集聚测度指数（DO）构建了综合评价方法,分别对景观生态格局和经济生产空间进行分析,诊断二者的空间冲突确定战略节点并构建生态安全网络。结果表明：① 研究区包含重要生态源地29个,总面积为7323 km²;生态安全阻力高值区面积占39.69%,位于城市中部和东部连片区域,低值区则处于外围,且连通过渡区域较少,呈现空间上两极分化的“中心—外围”景观生态格局;② 经济生产空间临近水资源分布,呈现为小尺度集聚、大尺度分散的空间格局;主要产业集聚区的平均长度和数量均显示出重度污染行业>轻度污染行业>中度污染行业的空间关系;③ 识别出景观生态廊道总长685.57 km,选取了25个生态—经济战略节点,规划了18条总长424.53 km的重要绿带和26条总长662.46 km的一般绿带,共同构成了“蜂巢状”九江市生态安全网络格局。本文采用自然和经济条件相结合的综合分析视角,为生态安全格局的构建提供了多样化的实现途径。  相似文献