地中海直布罗陀海峡附近内孤立波的地球物理特征          下载免费PDF全文

孙绍箐  张锟  宋海斌 《地球物理学报》2019,62(7):2622-2632

本文主要利用地震海洋学方法研究地中海直布罗陀海峡附近内孤立波的结构特征，此处内孤立波为第一模态下沉型，为中幅度和大幅度内孤立波，垂向振幅最大可达74.5 m，振幅随深度增加呈增大趋势，传播速度随振幅增大而增大，可以确定"真"最大振幅位置位于密跃层附近.由于类多普勒效应和孤立波与测量船之间存在夹角的原因，从地震剖面上得到的为视半高宽参数，需要进行校正后才能得到比较真实的半高宽参数，校正后半高宽最高可达到1721.8 m，但是校正后的半高宽与理论结果有些差距，这可能与内孤立波的发育稳定程度有关.随着内孤立波包不断向东运动，整体波宽变大，垂向速度变小.本文将地震海洋学方法拓展应用于地中海区域内孤立波分析，进一步证明了利用地震海洋学方法研究海水运动的可行性.  相似文献   

三峡库区龙门寨危岩体崩塌产生涌浪研究   总被引：1，自引：1，他引：0  

郑嘉豪  黄波林  张全  赵海林  冯万里  王健  陈小婷 《地质力学学报》2020,26(4):533-543

长江两岸高耸的危岩体对航道、沿岸居民带来巨大安全隐患。大宁河属于长江一级支流，龙门寨危岩体位于大宁河上，距离巫山县城仅1 km。利用FLOW-3D软件，模拟了145 m、175 m两种水位工况下龙门寨危岩体崩塌产生涌浪过程和涌浪传播过程。模拟结果表明，涌浪在145 m水位工况下最大浪高约为17.9 m，175 m水位工况下最大浪高约为11.6 m；在巫山县的五个码头处，两种水位工况最大涌浪爬高分别约为10.9 m、3.8 m；根据涌浪高度，对大宁河进行危险分区，145 m水位工况下极高危险区长度约4.4 km，很高危险区长度约1.9 km；175 m水位工况下极高危险区长度约3.0 km，很高危险区长度约1.0 km。研究结果有助于防控龙门寨危岩体潜在涌浪灾害危害，保障大宁河航道和巫山县码头安全，同时也为三峡库区滑坡涌浪灾害提供了预警依据。   相似文献   

唐山地区波速比变化特征研究     

王亚茹  宋昭  刘晓丹  郭蕾  王妍  王时  宫猛  王想 《大地测量与地球动力学》2019,39(7):686-690

选取唐山地区2008~2018年震相数据，利用单台多震和达法和多台多震和达法分别计算波速比，结合研究区内的地震活动对波速比的变化特征进行研究。结果显示，多台多震和达法得到的波速比结果较为稳定，而单台多震和达法得到的结果变化幅度大，显示更多细节；唐山地区ML≥4.5地震发生前单台波速比存在不同程度的异常，异常台站的方位与地震具有一定的对应性。  相似文献   

海上风电升压站平台高程确定标准的合理性研究     

潘晓春 《海洋技术学报》2019,38(6):83-88

为保证海上风电升压电站建设的经济合理与安全可靠,合理确定海上风电升压电站平台高程十分必要。文中从波浪与潮位的遭遇组合、最大波高取值与现行相关标准的比较、最大波峰高度计算的合理性等方面,全面分析了确定海上风电升压站平台高程各组成项取值标准的合理性,研究认为现行标准明显偏高。建议海上升压站平台底部高程按"100年一遇极端高水位+重现期50年波列累积频率1%的最大波峰高度+安全超高"确定。结合工程实例计算分析,按本文建议可使海上升压站平台高程明显降低,从而节省工程造价,还可减轻升压站工程对周边风机的遮蔽影响,以达到多发电量的效果。  相似文献   

Obtaining the distribution of quiescent periods directly from the power spectral densities of Sea waves     

《Applied Ocean Research》2019

There is a growing practical interest in the ability to increase the sea states at which marine operations can be safely undertaken by exploiting the quiescent periods that are well known to exist under a wide range of sea conditions. While the actual prediction of quiescent periods at sea for the control of operations is a deterministic process, the long term planning of future maritime tasks that rely on these quiescent periods is a statistical process involving the anticipated quiescence properties of the forecasted sea conditions in the geographical region of interest. It is in principle possible to obtain such data in tabular form either large scale simulation or from field data. However, such simulations are computationally intensive and libraries of appropriate field data are not common. Thus, it is clearly attractive to develop techniques that exploit standard wave spectral models for describing the quiescence statistics directly from such spectra. The present study focuses upon such techniques and is a first step towards the production of a computationally low-cost quiescence prediction tool and compares its efficacy against simulations. Two significant properties emerge for a large class of wave spectral models that encompasses the ubiquitous Neumann and Pierson Moskowitz or Bretschneider forms. Firstly, the auto-correlation function of the wave profile that are required to produce the quiescence property can be obtained analytically in terms of standard special functions. This considerably reduces the computational cost making desktop computer-based planning tools a reality. Secondly, for each class of these parametric spectra, the probability of a given number of consecutive wave heights (normalised to the significant wave heights) less than some critical value is in fact independent of absolute wave height. Thus, for a broad class of practically interesting wave spectra all that is required to obtain the statistical distribution of the quiescent periods is simple rescaling.  相似文献   

Relationship Between Electrical Properties and Sedimentary Environment of the Longmaxi Formation Shale, Southern Sichuan     

YANG Kai  ZHANG Bing  WANG Xuben  HE Lanfang  YANG Hongyu  WANG Pengwan  TANG Jialin  DENG Jixin  ZHANG Cong 《《地质学报》英文版》2020,94(5):1531-1546

The Lower Silurian Longmaxi Formation in the south of Sichuan is a key player in the exploration and development of shale gas in China. Due to a highly complex topographic area, electromagnetic methods (EM) become important exploration means in this area. Many studies have been conducted on the shale mineral composition and electrical properties of shale, however, the correlation between sedimentary environments and the electrical properties of shale remain poorly understood. The electrical properties and sedimentary environment of the organic-rich shale of the Longmaxi Formation have been studied by means of X-ray diffraction, organic geochemistry, scanning electron microscopy and complex resistivity measurements. The discovered high quartz content of the Longmaxi Formation shale results in low resistivity. Deep-water shelf biogenic quartz contributes lower resistivity more than that of shallow-water terrigenous quartz. The deep-water anoxic and organic sedimentary environment led to major enrichment of pyrite, leading to a high polarization effect in shale. We present the correlation between the lithofacies types and electrical properties of Longmaxi Formation. The mixed siliceous shale lithofacies is the most favorable among the three lithofacies, which is characterized by high total organic carbon (TOC) content, high brittleness mineral content, high polarization and low resistivity (“three high and one low”). This feature is an effective identification of shale gas reservoirs by electromagnetic prospecting. Our study can provide constraints on electrical parameters of rocks for electromagnetic “sweet spot” exploration of shale gas, and so this has important geological significance to shale gas exploration and development.  相似文献   

Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis     

Ramin Pakzad  Shanyong Wang  Scott W. Sloan 《国际地质力学数值与分析法杂志》2020,44(10):1472-1494

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.  相似文献   

一种优化的频率域三维声波有限差分模拟方法   总被引：1，自引：1，他引：0       下载免费PDF全文

范娜  成景旺  秦雷  赵连锋  谢小碧  姚振兴 《地球物理学报》2018,61(3):1095-1108

为提高频率域有限差分（FD，finite-difference）正演模拟技术的计算精度和效率，基于旋转坐标系统的优化差分格式被广泛应用，但是只应用于正方形网格的情况.基于平均导数法（ADM）的优化差分格式，应用于正方形和长方形网格模拟.这些频率域有限差分算子，各自具有不同的差分格式和对应的优化系数求解表达式.本文基于三维声波方程发展了一种新的优化方法，只要给定FD模板形式，可直接构造频散方程，求取FD模板上各节点的优化系数.此方法的优点在于频率域FD算子的优化系数对应各个节点，可扩展优化其他格式.运用此优化方法，计算得到了不同空间采样间距比情况下27点和7点格式的优化系数.数值实验表明，优化27点格式与ADM 27点格式具有相同的精度，优化7点格式比经典的7点格式具有更小的数值频散.  相似文献   

各向异性介质的矢量波场分离与应用          下载免费PDF全文

芦俊  石瑛  杨春颖 《地球物理学报》2018,61(8):3310-3323

针对裂缝各向异性介质，本文提出一种非正交假设下的矢量波场分离方法.本文首先对多分量地震勘探中常见的波型泄漏现象进行了数学描述，提出在纵、横波波场分离的同时应该考虑恢复纵、横波的矢量振幅.为了对裂缝方位角与各向异性系数进行定量预测，本文将矢量波场分离拆分成三个步骤来实施：第一步，用Z、R两分量的仿射坐标系变换分离ZR平面内的P波投影与SV波；第二步，用ZR平面内的P波投影与T分量的仿射坐标系变换分离P波与SH波；第三步，用纯净的SV波与SH波的成像剖面分离快慢横波，并预测裂缝发育参数.模型数据与实际数据的试验结果表明，本文提出的纵、横波波场分离方法能够获得完整的矢量振幅信息，并提供裂缝预测的精度.  相似文献   

Elastic one-return boundary element method and hybrid elastic thin-slab propagator for strong-contrast media with sharp boundaries          下载免费PDF全文

Zengxi Ge  Yi Luo  Yuyan Ma  Rushan Wu 《地震科学（英文版）》2018,31(2):92-99

In this paper, we developed the theory and algorithm of an elastic one-way boundary element method(BEM) and a corresponding hybrid elastic thin-slab propagator for earth media with sharp boundaries between strong contrast media. This approach can takes the advantage of accurate boundary condition of BEM and completely overcomes the weak contrast limitation of the perturbationtheory based one-way operator approach. The one-way BEM is a smooth boundary approximation, which avoids huge matrix operations in exact full BEM. In addition, the one-way BEM can model the primary-only transmitted and reflected waves and therefore is a valuable tool in elastic imaging and inversion. Through numerical tests for some simple models,we proved the validity and efficiency of the proposed method.  相似文献