Coastal ridge constructive processes at a multi-decadal scale in Barreta Island (southern Portugal)     

Xabier Herrero  Susana Costas  Katerina Kombiadou 《地球表面变化过程与地形》2020,45(2):411-423

Multiple ridges across prograding coasts may display variable geometries, commonly expressed through varying elevations. Changes in ridge elevation have been traditionally related to the occurrence of fluctuating progradation rates, which might, in turn, be driven by shifting environmental conditions. Here, we explore the geometry and growth mechanisms of multiple ridges, generated at Barreta Island (Ria Formosa, southern Portugal), as a consequence of the rapid progradation of the island over the last 70 years, following the artificial fixation of the downdrift Faro-Olhão inlet with jetties in 1955. The variability in the morphology of these features was analysed in combination with available wind and wave data, in order to better distinguish growth mechanisms and understand the main parameters determining the final geometry of the observed ridges. The results suggest that (1) most of the identified ridges fall in the beach ridge classification, as they have been mostly built by marine processes, and (2) the parameters derived from, or closely related to wave climate variability (e.g. progradation rates, storm occurrence) can jointly explain most of the observed morphological changes, while aeolian processes played a secondary role. Indeed, ridge geometry appears mainly controlled by progradation rates, with higher ridges associated with lower progradation rates. Progradation rate, in turn, is mostly related to longshore wave power, storminess, and the occurrence storm groups. Yet, the final configuration of ridges can also be affected by runup levels and onshore winds. Therefore, establishing the relation between ridge geometry and wave climate is not a straightforward task, because of the complex processes and interactions that control coastal morphodynamics. © 2019 John Wiley & Sons, Ltd.  相似文献   

1966—2018年河西走廊春季寒潮频次及影响因子分析          下载免费PDF全文

吕青松  辛存林  王瑞  张勃  张华 《干旱区地理》2020,43(4):946-954

基于甘肃河西走廊15个国家基准基本站点提供的1966年1月1日~2018年12月31日春季（3~5月）逐日最低气温值数据,利用线性回归分析方法、Spline空间插值法和Mann-Kendall趋势和突变检验法,探讨了河西走廊地区1966—2018年春季（3~5月）寒潮频次变化及其影响因子。研究表明：（1） 1966—2018年河西走廊地区春季（3~5月）单站寒潮频次总体呈现下降趋势〔–0.098次·（10 a）^–1〕,其中1980—2010年寒潮频次呈显著下降趋势,2010年之后下降趋势变缓,未通过显著性检验;区域寒潮53 a来频次总体呈缓慢下降趋势〔–0.015次·（10 a）^–1〕。（2） 近53 a河西走廊地区春季三个月中,单站寒潮总量4月>3月>5月,其中4月、5月寒潮频次下降不明显,3月频次下降显著。（3） 空间上,大致以北大河和黑河干流为界,两河中间区域春季寒潮频次低,而北大河以北和黑河干流以东区域则是寒潮高值区,走廊外围地区寒潮频次较高,且大多呈显著下降趋势,寒潮频次与气温距平存在明显负相关关系,内部地区变化趋势不明显。（4） 河西地区春季寒潮频次受气候变暖、地形和大气环流的影响,寒潮频次变化趋势存在地区差异。研究可提高对甘肃河西走廊寒潮演化过程的认知,为河西走廊气候变化的进一步研究奠定基础。  相似文献   

多点液压式波浪能海水淡化系统建模与仿真   总被引：1，自引：1，他引：0  

胡缘  杨绍辉  何宏舟  陈沪  郑松根  张迪 《海洋工程》2019,37(1):134-141

为缓解淡水资源短缺及化石能源过度使用问题,提出多点液压式波浪能海水淡化系统,该系统主要由采能装置、液压传递系统与反渗透膜海水淡化设备组成。系统的采能装置采用振荡浮子式,可将波浪能转换为浮子振荡从而被液压系统吸收达到采集波浪能的目的。为了提高液压式波浪能海水淡化系统的采能效率及淡水率,利用AMEsim软件对液压传递系统进行建模与仿真,分析了蓄能器、浮子个数及波高对液压传递系统输出响应的影响。结果表明:蓄能器能够使液压马达的输出响应更加稳定;当浮子的数量增加时,液压系统达到稳定的运行状态所需的时间更短,从而有利于提高系统的效率;波高在2 m左右时,本系统的产水量达到最大。  相似文献   

高分辨率反射波地震勘探在城市隐伏断裂探测中的应用——以成都天府新区苏码头断裂为例     

刘远志  刘胜  李大虎  夏友钢  李颖  周德帅 《大地测量与地球动力学》2019,39(9):910-915

采用“三小三高二绝招”的工作方法，通过静校正、多域多方法联合噪音衰减和精细的速度分析获得较高分辨率的地震时间剖面，揭示苏码头断裂的展布位置、构造形态及变形样式等。结果表明，区域构造以冲起式为主，在反冲断层与逆冲断层之间形成冲起构造或逆冲三角构造，在地震剖面上有明显的楔状特征。通过地震测线的断层走向以NE为主，倾向以SE为主，部分断层倾向为NW。  相似文献   

南海东北部东沙海域海水层反射特征分析     

李豪  关永贤  宋海斌  张锟  范文豪 《地球物理学进展》2020,(1):303-312

本文基于对南海东北部东沙海域近期采集的多道反射地震资料进行重新处理获得新的地震海洋学数据,分析了该海域内孤立波/内孤立波包、沙丘上方和陡坎附近特殊反射结构特征,从而提供了新的海水层与海底相互作用依据.研究结果表明,除之前已发表文章中地震海洋学资料显示存在的第一模态内孤立波/波包和沙丘上方常见的反射样式-披毛状发射外,地震海洋学资料上还发现了第二模态内孤立波、陡坎上方的上抬型波动反射结构样式.在新的地震海洋学数据中,第一模态内孤立波振幅均小于50 m,宽度上都小于5 km,单个内孤立波的最大振幅约为45 m.内孤立波包的内孤立波振幅都相对较小,均小于40 m,并且与之前不同的是,彼此之间振幅相差不大,没有明显的排列规律.此次地震海洋学数据记录到的第二模态内孤立波,形态较为完整,上层和下层反射的振幅相差不大,在30 m左右;中间层大约在水深130 m位置处,垂向结构的整体大小大于200 m.沙丘上方反射结构普遍存在弱反射层,可能是湍流边界层,并且存在特殊反射样式-披毛状反射.但并不是沙丘上方都存在披毛状反射样式,本文分析它出现在地震海洋学资料上可能是受测线与沙丘走向之间夹角的影响.陡坎区域的水层反射结构则表现为上抬型波动,并常常伴随着同相轴连续性的变化.该波动的大小及反射同相轴的连续性可能取决于陡坎的高度/坡度及水层动力的强度,新数据中出现的一个上抬型波动,高度达20~30 m,它的附近水层还存在一个形态不完整的内孤立波.陡坎附近的水层反射也常常出现弱反射带和小的波动.  相似文献   

基于钻进状态监测的智能工况识别          下载免费PDF全文

范海鹏  吴敏  曹卫华  赖旭芝  陈略峰  陆承达 《探矿工程》2020,47(4):106-113

钻进过程状态监测旨在实时描述钻进工况，判断运行性能优劣程度进行非优追溯，及时指导司钻人员调整作业操作,保证钻进过程安全、高效、稳定开展。钻进工况是钻进系统运行状态的反映，因此开展面向状态监测技术的钻进工况识别研究具有重要的理论和应用价值。本文针对钻进工况识别问题，基于状态监测数据，建立基于支持向量机的钻进工况识别模型，对钻进工况进行识别。综合工况识别结果，对钻进效率进行评估，并对影响钻进效率的因素进行讨论，寻找提升钻进效率的手段。最后，采用钻进现场实钻数据进行仿真实验,验证所提方法的可行性和有效性。  相似文献   

Magnitude of latent heat in thermally loaded clays     

Sergio Samat  Laurent Brochard  Ioannis Stefanou 《国际地质力学数值与分析法杂志》2020,44(14):1926-1957

Temperature changes are known to induce specific couplings in clay, in particular, an anomalously high thermal pressurization in undrained conditions or a thermal compaction in drained conditions, both of which are potential threats for the mechanical stability and sealing capacity of the geomaterials. Thermodynamical analysis of those peculiar thermomechanical couplings points to a potentially important latent energy, which in turn could limit the temperature change upon heating or cooling. The direct measurement of latent energy developed during a laboratory geomechanical test is challenging. Instead, proper identification of thermal hardening in conventional experiments with temperature changes provides an alternative route to estimate latent energy. In this work, existing laboratory thermomechanical tests of clays are analyzed with a rigorous thermodynamic framework to quantify the magnitude of latent energy in thermomechanically loaded clays. A thermodynamically consistent constitutive model for fully saturated clays that combines two key features, (a) the temperature dependence of the blocked energy and (b) the framework of bounding plasticity, is proposed. The performance of the model is validated by reproducing results obtained in laboratory tests for Boom and Opalinus clays. The thermomechanical loads considered to validate the model performance were then used to estimate the percentage of work that remains latent in the clayey material during plastic yielding. We find that the magnitude of latent energy is quite significant, typically a few tens of percent of the total dissipated energy, and increases significantly with temperature. Accordingly, it is expected to play an important role in the thermomechanical response of clays.  相似文献   

An extreme wave event in eastern Yucatán,Mexico: Evidence of a palaeotsunami event during the Mayan times     

Javier Lario  Chris Spencer  Teresa Bardají  Ángel Marchante  Victor H. Garduño-monroy  Jorge Macias  Sergio Ortega 《Sedimentology》2020,67(3):1481-1504

The Yucatán Peninsula, Mexico, has typically been considered a tectonically stable region with little significant seismic activity. The region though, is one that is regularly affected by hurricanes. A detailed survey of ca 100 km of the eastern Yucatán and Cozumel coast identified the presence of ridges containing individual boulders measuring >1 m in length. The boulder ridges reach 5 m in height and their origin is associated with extreme wave event activity. Previously modelled tsunami waves from known seismically active zones in the region (Muertos Thrust Belt and South Caribbean Deformed Belt) are not of sufficient scale in the area of the Yucatán Peninsula to have produced the boulder ridges recorded in this study. The occurrence of hurricanes in this region is more common, but two of the most destructive (Hurricane Gilbert 1988 and Hurricane Wilma 2005) produced coastal waves too small to have created the ridges recorded here. In this paper, a new tsunami model with a source area located on the Motagua/Swan Island Fault System has been generated that indicates a tsunami event may have caused the extreme wave events that resulted in the deposition of the boulder ridges.  相似文献   

波纹钢管铅阻尼器耗能性能分析研究          下载免费PDF全文

周云  吴胜 《世界地震工程》2020,(4):103-111

提出一种波纹钢管铅阻尼器，介绍了其构造、工作机理、布置形式及特点，采用ABAQUS软件，建立钢管阻尼器、波纹钢管阻尼器和波纹钢管铅阻尼器有限元模型，对其应力分布，传力路径和滞回性能进行模拟分析。结果表明:波纹钢管铅阻尼器耗能减震机理明确，工作性能和耗能性能稳定，滞回曲线饱满以及耗能能力强，具有良好的变形和延性，极限变形大；波纹钢管铅阻尼器通过在波纹钢管内设置铅芯使初始刚度、承载能力和耗能能力得到大幅度提高，既有效保持了波纹钢管的变形能力，又避免波纹钢管发生局部屈曲，使波纹钢管耗能能力得到充分发挥。波纹钢管铅阻尼器在1mm小位移下就可以进入耗能，而且很快进入稳定耗能状态，等效阻尼比稳定在0.3~0.4之间。  相似文献   

Active channel width as a proxy of sediment supply from mining sites in New Caledonia     

Mélanie Bertrand  Frédéric Liébault 《地球表面变化过程与地形》2019,44(1):67-76

Although the channel morphology of upland fluvial systems is known to be strongly controlled by sediment supply from hillslopes, it is still difficult to isolate this effect from the other controlling factors of channel forms, such as the sediment transport capacity (depending notably on the size of the catchment) and local conditions (e.g. confinement, riparian vegetation, valley-floor slope). The rivers in New Caledonia offer an interesting field laboratory to isolate the morphological effect of contrasted sediment supply conditions. Some of these rivers are known to be highly impacted by the coarse sediment waves induced by the mining of nickel deposits that started in the early 1870s, which was particularly intensive between the 1940s and 1970s. The propagation of the sediment pulses from the mining sites can be traced by the presence of wide and aggraded active channels along the stream network of nickel-rich peridotite massifs. A first set of 63 undisturbed catchments in peridotite massifs distributed across the Grande Terre was used to fit a classic scaling law between active channel width and drainage area. A second set of 86 impacted sites, where the presence of sediment waves was clearly attested by recent aerial imagery, showed systematically wider active channels, with a width ratio around 5 (established from the intercept ratio of width–area power laws). More importantly, this second set of disturbed sites confirmed that the residual of active channel widths, computed from the scaling law of undisturbed sites, is statistically positively related to the catchment-scale relative area of major mining sediment sources. It is therefore confirmed that the characterization of sediment supply conditions is crucial for the understanding of spatial patterns of active channel width, and this should be more thoroughly considered in morphological studies of rivers draining environments with contrasted geomorphic activities on hillslopes. © 2018 John Wiley & Sons, Ltd.  相似文献