中国省域尺度17部门资本存量的时空特征分析     

刘丽  李宁  张正涛  冯介玲  陈曦  白扣  黄承芳 《地理科学进展》2019,38(4):546-555

随着灾害强度、频率以及承灾体暴露的增加,自然灾害造成的损失日益严重。资本存量作为承灾体的经济暴露指标之一,是灾害损失评估的前提和基础。针对目前中国缺乏省域尺度长时间序列的经济部门分类的资本存量数据基础,论文通过永续盘存法,建立了2003—2015年中国大陆31省17部门的资本存量数据库,并分析其时空特征。结果显示：① 全国总资本存量与灾害直接损失的年际变化均呈增加趋势。省域尺度上,通过相关性分析显示,在99%置信度水平上,两者呈显著正相关(r=0.3)。② 时间上,各省17部门资本存量基本也呈增加趋势,但增速不同。在各部门增速最快的省份中,黑龙江省的居民服务、修理和其他服务业增速最快,增长约454.3倍;其次是青海省的租赁和商务服务业(398.3倍)、江苏省的金融业(295.1倍)、安徽省的科学研究和技术服务业(125.1倍)等。③ 空间上,2015年各省17部门资本存量最多的前4个部门分别是房地产业,工业,交通运输、仓储和邮政业,水利、环境和公共设施管理业,占比均在60%以上;且这4个部门资本存量暴露最多的省份是江苏省和广东省。该结果有助于从时空角度了解各省各部门资本存量暴露情况,为各省灾害风险管理者的防灾减灾工作提供重要的参考价值。  相似文献   

高强耐热铝合金钻杆材料优选          下载免费PDF全文

梁健  尹浩  孙建华  李亚红  王成彪  张金昌 《探矿工程》2020,47(4):65-71

铝合金钻杆的使用性能是制约深部钻探技术发展的“瓶颈”。本文综合考虑孔内工况因素和钻杆性能因素，以钻柱组合设计为基础准则，从特深孔钻探工程技术需求出发，开展了高强耐温铝合金钻杆材质选择和评价的试验研究。试验结果表明：2219铝合金固溶时效制度分别为535 ℃/1 h、165 ℃/20 h，2618铝合金固溶时效制度分别为530 ℃/1 h、200 ℃/20 h；2219铝合金在高温长时间暴露后的室温力学性能优于2618铝合金，在高温瞬时条件下的力学性能劣于2618铝合金；2219铝合金中含有Zr，该元素在热暴露过程中起到减缓溶质扩散速率的作用，这对提高热暴露后的剩余强度是有利的。  相似文献   

耦合土地利用回归与人口加权模型的PM2.5暴露风险评估     

邹雨轩  吴志峰  曹峥 《地球信息科学学报》2019,21(7):1018-1028

PM_2.5已成为人群健康的重要威胁之一,科学精准的暴露评估是PM_2.5风险防控的前提,为提升PM_2.5暴露精准评估,本文利用土地利用数据、道路数据、气象数据等构建PM_2.5土地利用回归反演模型,实现了2013年12月1日-2014年2月8日（冬季）广佛都市区PM_2.5时空动态演变监测,在此基础上将PM_2.5反演结果与人口密度数据耦合,分别从PM_2.5污染浓度与人口加权PM_2.5浓度2个方面,评估广佛都市区PM_2.5污染暴露风险。研究结果表明：① 土地利用回归模型能够较好的反映研究区域内PM_2.5的空间分布特征,R²大于0.78;② 2013年12月1日-2014年2月8日,广佛都市区PM_2.5浓度平均值呈现波动变化趋势,研究时段内,最高平均浓度为97.91 μg/m³ （12月29日-1月11日）,最低平均浓度为53.40 μg/m³ （1月26日-2月8日）,全时段PM_2.5浓度超WHO健康标准的面积占比达99.8%;③ 广佛都市区PM_2.5的空间分布具有异质性规律,其高值区分别位于广州市天河区、越秀区、番禺区北部、花都区北部及佛山市禅城区、南海区中部、三水区中部,低值区主要位于广州市白云区、番禺区东南部及佛山市顺德区南部。人口加权暴露风险存在2个高值中心,分别位于广州市和佛山市的主城区;④ 耦合人口加权模型前后,广佛都市区PM_2.5暴露风险高风险区空间分布发生变化,未考虑人口加权模型时,广佛深高值区较为分散,主要位于南海区、天河区、越秀区、禅城区,考虑人口加权模型后,高值区更加集中于广州市和佛山市的主城区。  相似文献   

内蒙古别鲁乌图铜多金属矿床锆石U-Pb年龄和S、Pb同位素特征及其地质意义     

郭硕  何鹏  刘洋  滕飞  胡晓佳  王文龙  杨泽黎 《现代地质》2020,(1):40-50

为了明确内蒙古别鲁乌图铜多金属矿床的成矿年龄与矿床成因,对该矿床中与成矿关系密切的流纹岩进行了锆石U-Pb年龄以及主要金属硫化物的S、Pb同位素测试。其中流纹岩的锆石206Pb/238U加权平均年龄为(271.7±1.6)Ma(MSWD=1.02),显示成矿作用发生于二叠纪。金属硫化物的S同位素分析结果显示δ34SV-CDT值分布在-0.6‰~1.0‰之间,平均为0.49‰,变化范围较窄,显示S的来源单一;Pb同位素组成比较集中,206Pb/204Pb为18.207~18.674,207Pb/204Pb为15.620~15.699,208Pb/204Pb为38.144~38.790,具有壳幔混源的特征。S、Pb同位素特征均指示成矿物质主要来源于岩浆热液。结合区域地质、矿床地质、空间分带等特征以及S、Pb同位素组成可知,别鲁乌图铜多金属矿床为VHMS型矿床,形成于二叠纪陆缘弧裂谷中。  相似文献   

Hydraulics of overland flow influenced by litter incorporation under extreme rainfall     

Lunjiang Wang  Guanghui Zhang  Xue Wang  Xiaoyan Li 《水文研究》2019,33(5):737-747

Water erosion on hillslopes is a worldwide environmental problem, which is a rainfall‐induced process, especially extreme rainfall. The great intensity of extreme rainfall strongly enhances the power of overland flow to detach soil and transport sediment. Plant litter is one of the most important constituents of ecosystems that often covers the soil surface and can be incorporated into topsoil. However, little attention has been paid to its effect on flow hydraulics owing to the veiled nature. This study aimed to examine the effects of incorporated litter on the hydraulic properties under extreme rainfall condition. To reach this goal, six litter rates of 0, 0.05, 0.10, 0.20, 0.35, and 0.50 kg m^?2 and four litter types collected from deciduous trees, coniferous trees, shrubs, and herbs were incorporated into topsoil. Then, simulated rainfall experiments were performed on five slope gradients (5°, 10°, 15°, 20°, and 25°) with an extreme rainfall intensity of 80 mm h^?1. The results showed that Froude number and flow velocity of the overland flow decreased, whereas flow resistance increased exponentially with litter incorporation rate. Litter type had an influence on flow hydraulics, which can mainly be attributed to the variations in surface coverage of the exposed litter and the litter morphology. Flow velocity and Darcy–Weisbach coefficient increased markedly with slope gradient. However, the variation of slope gradient did not modify the relationships between flow hydraulics and incorporated litter rate. The random roughness, resulting from heterogeneous erosion due to the uneven protection of surface exposed litter, increased linearly with litter incorporated rate. As rainfall proceeded, flow hydraulics varied with incorporated litter rate and slope gradient complicatedly due to the increases in flow rate and coverage of the exposed litter and the modification of soil surface roughness.  相似文献   

特高压互连电气设备减震性能振动台试验          下载免费PDF全文

程永锋  孟宪政  卢智成  刘振林  邱宁  马跃 《地震工程学报》2019,41(2):292-298

为研究铅金属减震器对特高压互连电气设备的减震效果,进行由硬管母线连接的特高压避雷器设备和电容式电压互感器设备组成的互连耦合体系的地震模拟振动台试验。通过白噪声扫频、抗震及减震试验,测定互连耦合体系抗震结构及减震结构的自振频率以及关键部位的应变、加速度响应。试验结果表明:抗震结构中避雷器设备的最大应变响应大于互感器设备,互连耦合体系中的避雷器设备属于易损设备;安装减震器后互连设备频率降低幅度较小,减震器基本不会影响电气设备的正常运行;安装减震器后互连耦合体系中的避雷器设备和互感器设备在较大峰值加速度地震波作用下,设备顶端加速度响应和最大应变响应均有较大幅度的降低,避雷器设备和互感器设备的最大应变响应的减震效率分别为75%和50%,减震效果显著,减震器的应用大幅提升了互连耦合体系的抗震能力。  相似文献   

Response of hybrid isolation system during a shake table experiment of a full‐scale isolated building     

Keri L. Ryan  Taichiro Okazaki  Camila B. Coria  Eiji Sato  Tomohiro Sasaki 《地震工程与结构动力学》2018,47(11):2214-2232

A full‐scale 5‐story steel moment frame building was subjected to a series of earthquake excitations using the E‐Defense shake table in August, 2011. For one of the test configurations, the building was seismically isolated by a hybrid system of lead‐rubber bearings and low friction roller bearings known as cross‐linear bearings, and was designed for a very rare 100 000‐year return period earthquake at a Central and Eastern US soil site. The building was subject to 15 trials including sinusoidal input, recorded motions and simulated earthquakes, 2D and 3D input, and a range of intensities including some beyond the design basis level. The experimental program was one of the first system‐level full‐scale validations of seismic isolation and the first known full‐scale experiment of a hybrid isolation system incorporating lead‐rubber and low friction bearings. Stable response of the hybrid isolation system was demonstrated at displacement demands up to 550 mm and shear strain in excess of 200%. Torsional amplifications were within the new factor stipulated by the code provisions. Axial force was observed to transfer from the lead‐rubber bearings to the cross‐linear bearings at large displacements, and the force transfer at large displacements exceeded that predicted by basic calculations. The force transfer occurred primarily because of the flexural rigidity of the base diaphragm and the larger vertical stiffness of the cross‐linear bearings relative to the lead‐rubber bearings.  相似文献   

基于FEA的填充墙与隔震器协同抗震系统性能分析          下载免费PDF全文

李然 《地震工程学报》2018,40(5):891-896

隔震器与填充墙对建筑抗震性能有很大作用。为了探究填充墙布置形式及填充材料和隔震器协同作用对钢筋混凝土框架结构动力特性及抗震性能的影响,采用等效斜撑理论,对3种不同填充墙布置形式与隔震器协同作用的抗震系统方案进行对比分析,研究发现顶层不布置填充墙与隔震器协同抗震系统钢筋混凝土框架结构的抗震性能最佳。在此系统上分析了不同填充材料对钢筋混凝土框架结构抗震性能的影响,结果表明,加气混凝土砌块填充墙的钢筋混凝土框架结构抗震性能最好。  相似文献   

The effect of long-term aerial exposure on intertidal mudflat erodibility     

Hieu M. Nguyen  Karin R. Bryan  Conrad A. Pilditch 《地球表面变化过程与地形》2020,45(14):3623-3638

Intertidal zones by definition are exposed to air at low tide, and the exposure duration can be weeks (e.g. during neap tides) depending on water level and bed elevation. Here we investigated the effect of varying exposure duration (6 h to 10 days) on intertidal mudflat erosion (measured using the EROMES device), where the effects of water content and biofilm biomass (using chlorophyll-a content as a proxy, Chl-a μg g⁻¹) were taken into account. Sediments were collected between spring and summer (in October 2018, January 2019 and February 2019) from an intertidal site in the Firth of Thames, New Zealand. Longer exposure duration resulted in more stable sediments [higher erosion threshold (Ƭ_cr, N m⁻²) and lower erosion rate (ER, g m⁻² s⁻¹)]. After 10 days, exposure increased Ƭ_cr by 1.7 to 4.4 times and decreased ER by 11.6 to 21.5 times compared with 6 h of exposure. Chl-a and water content changed with exposure duration and were significantly correlated with changes in Ƭ_cr and ER. The stability of sediments after two re-submersion periods following exposure was also examined and showed that the stabilizing effect of exposure persisted even though water content had increased to non-exposure levels. Re-submersion was associated with an increase in Chl-a content, which likely counteracted the destabilizing influence of increased water content. A site-specific model, which included the interplay between evaporation and biofilm biomass, was developed to predict water content as a function of exposure duration. The modelled water content (W_Mod.) explained 98% of the observed variation in water content (W_Obs.). These results highlight how the exposure period can cause subtle changes to erosion regimes of sediments. An understanding of these effects (e.g. in sediment transport modelling) is critical to predicting the resilience of intertidal zones into the future, when sea-level rise is believed to exacerbate erosion in low-lying areas. © 2020 John Wiley & Sons, Ltd.  相似文献   

波纹钢管铅阻尼器耗能性能分析研究          下载免费PDF全文

周云  吴胜 《世界地震工程》2020,(4):103-111

提出一种波纹钢管铅阻尼器，介绍了其构造、工作机理、布置形式及特点，采用ABAQUS软件，建立钢管阻尼器、波纹钢管阻尼器和波纹钢管铅阻尼器有限元模型，对其应力分布，传力路径和滞回性能进行模拟分析。结果表明:波纹钢管铅阻尼器耗能减震机理明确，工作性能和耗能性能稳定，滞回曲线饱满以及耗能能力强，具有良好的变形和延性，极限变形大；波纹钢管铅阻尼器通过在波纹钢管内设置铅芯使初始刚度、承载能力和耗能能力得到大幅度提高，既有效保持了波纹钢管的变形能力，又避免波纹钢管发生局部屈曲，使波纹钢管耗能能力得到充分发挥。波纹钢管铅阻尼器在1mm小位移下就可以进入耗能，而且很快进入稳定耗能状态，等效阻尼比稳定在0.3~0.4之间。  相似文献