Temporal and Spatial Dynamics Analysis of Grassland Ecosystem Pressure in Kazakhstan     

WEN Xin  YAN Huimin  XIE Xiaoping  DU Wengpeng  LAI Chenxi  ZHEN Lin 《资源与生态学报(英文版)》2019,10(6):667-675

Affected by climate change and policy factors, Kazakhstan is the country with the most severe ecological degradation and grassland conflicts in Central Asia. Therefore, studying the state of grassland carrying resources in Kazakhstan is particularly important for understanding the responses of grassland ecosystems to climate change and human activities. Based on Kazakhstan's remote sensing data and animal husbandry statistics, this study analyzes the patterns of changes in grassland ecosystems in Kazakhstan based on the supply and consumption of these ecosystems. The results show that: 1) From 2003 to 2017, the number of livestock raised in Kazakhstan showed a trend of sustained and steady growth. Due to freezing damage, the scale of livestock farming decreased in 2011, but a spatial difference in the livestock farming structure was not obvious. 2) The fluctuation of grassland supply in Kazakhstan has increased, while the consumption due to animal husbandry has also continued to increase, resulting in an increasing pressure on the grassland carrying capacity. 3) Between 2003 and 2017, the overall grassland carrying status of Kazakhstan have been abundant, but the grassland carrying pressure index has shown a steadily increasing trend, the grassland carrying pressure is growing, and it is mainly determined by grassland productivity. The greater pressure in lower Kyzylorda state, the southern Kazakhstan state of the cultivated land and the northern Kazakhstan state has gradually expanded to include the agro-pastoral zone and the semi-desert zone.  相似文献   

Locality Attributes and Networks Serving to Reveal Amazonian Urbanization beyond the Cities     

Ana Paula Dal'Asta  Silvana Amaral 《Geographical review》2019,109(2):199-223

Beyond the Amazonian cities, distinct spatial units arranged in networks compose an extended urban space, usually invisible to government agencies and public polities. This article empirically reveals this space by studying the localities’ characteristics and connections. In southwestern Pará, Brazil, 236 communities were sampled using field expeditions. Variables related to the locality organization, history, health and education services, urban infrastructure, and land use were explored in a fuzzy cluster analysis. Local production and consumption flows were considered in the locality network analysis. The fuzzy analysis allowed identifying a hierarchy of localities for which the geographical location influences the spatial distribution patterns of five groups. On the other hand, consumption and production networks identified different locality's articulations, with persistent dependence on cities. These results characterize extensive urbanization at the local level and highlights the participation of the local populations configuring the Amazonian territory.  相似文献   

贵州安龙县耕地土壤几种有效态与对应全量、pH值、有机质的相关分析          下载免费PDF全文

鲍大忠  游桂芝  袁盛博 《贵州地质》2020,37(4):546-550

为了掌握快速路瓶颈路段异质交通流的演变规律，以缓解交通拥堵，本文以快速路上匝道瓶颈路段为研究对象，构建了考虑安全距离的改进NaSch上匝道模型，利用数值仿真，对不同场景交通流演化过程进行系统性研究。仿真结果显示：在不同条件下，异质交通流中自动驾驶车辆比例的增加对瓶颈路段交通运营状态影响结果各异。在自由流阶段，自动驾驶车辆比例的增加对快速路瓶颈路段运营通行能力的增加无显著影响，自动驾驶车辆比例取0.9时，瓶颈路段运营通行能力反而降低了2.48%；在交通拥堵状态下，当异质交通流中自动驾驶车辆比例达到0.7及以上时，才有助于交通拥堵的消散，且其临界值随交通拥堵状态程度的提高而增大；当交通密度达到100 veh/km以上时，自动驾驶车辆比例的增加无法实质性改善瓶颈路段交通拥堵状态。研究结果可为异质交通流环境下的快速路上匝道瓶颈路段的治堵策略提供理论依据。  相似文献   

Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis     

Ramin Pakzad  Shanyong Wang  Scott W. Sloan 《国际地质力学数值与分析法杂志》2020,44(10):1472-1494

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.  相似文献   

捷联式航空重力扰动矢量解算及误差补偿     

郭栋  孙中苗  吴富梅  张琪 《大地测量与地球动力学》2018,38(12):1295-1301

介绍捷联式航空重力矢量测量的基本原理，利用波数相关滤波（WCF）、比力线性校正的方法对重力扰动的水平和垂向分量进行误差补偿，评定内符合精度。对国产捷联式航空重力矢量仪的某次试验数据进行处理，以验证和评估航空重力矢量仪的性能。结果表明，在半波长分辨率为7.5 km时，6条重复测线的重力扰动水平分量经波数相关滤波处理后，东、北向分量的平均内符合精度分别从9.77 mGal、9.18 mGal提高到5.95 mGal、3.83 mGal；对比力的垂向分量线性校正后，将解算的重力扰动垂向分量再用WCF方法处理，其平均内符合精度从1.27 mGal提高到0.59 mGal。  相似文献   

基于多元线性回归方法的砌体结构加固费用估算模型研究   总被引：1，自引：0，他引：1       下载免费PDF全文

郑山锁  丁明松  郑捷  侯丕吉 《地震工程学报》2018,40(1):6-13

为建立适用于砌体结构的加固费用快速估算模型,对中国陕西、山西、四川等地砌体结构建筑物的历史加固费用及相关建筑参数进行统计,建立涵盖35栋砌体结构建筑物加固费用估算模型的回归与验证数据库,同时对影响加固费用的各建筑参数作显著性分析,并基于后向消去的多元线性回归方法,利用SPSS统计分析软件对已采集的加固数据进行回归,得到4个费用估算模型;按照相应评价准则分别对各模型进行评价,提出一套最优的砌体结构加固费用快速估算模型,并对该回归模型进行验证分析。回归得到的费用估算模型满足精度要求,具有一定的工程应用价值。  相似文献   

基态位涡径向分布对浅水涡旋系统演变的影响分析Part Ⅱ:扰动发展和结构变化          下载免费PDF全文

刘爽  钟玮  刘宇迪 《地球物理学报》2018,61(9):3592-3606

本文在基态位涡（Potential Vorticity，PV）径向分布和基态涡旋强度对热带气旋（Tropical Cyclone，TC）类涡旋系统稳定性特征影响的研究基础上，结合理想试验和数值模拟诊断分析基态PV径向分布对扰动增长和系统结构变化的影响.基于线性正压浅水模型，设计三种典型基态PV中空结构下基态涡旋强度对系统稳定性影响的敏感性试验.结果表明：基态涡旋的强度主要影响稳定性的强弱，强度越强，不稳定增长率越大，而基态PV径向分布对系统最不稳定波动性质起着决定作用.分析不同波数下扰动的发展及不同波数间扰动的相互作用可知，对于宽且实的PV环，系统稳定性主要取决于低波数不稳定，且最不稳定波数扰动的发展具有明显的优势地位；对于窄且空的PV环，系统稳定性主要取决于高波数不稳定，且多个高波数下增长最快模态的不稳定增长率值十分接近.利用模态线性叠加法讨论扰动增长对系统结构变化的影响表明：最不稳定波数的扰动发展对系统结构变化有关键影响，而多个波数的扰动不稳定增长相当时，不同波数的扰动发生相互作用从而影响系统结构变化.最后，利用实际个例模拟资料分析基态PV径向分布及其变化对TC结构和强度的影响表明：TC内核区出现的多边形眼墙结构与当前时刻基态PV径向分布所决定的最不稳定波数有很好的对应关系，同时基态PV径向分布变化所反映出的系统动力稳定性强弱与TC强度发展阶段具有很好的相关性.  相似文献   

常Q滞弹性介质地震波动数值模拟——时域本构优化逼近          下载免费PDF全文

谢志南  郑永路  章旭斌 《地球物理学报》2018,61(10):4007-4020

在地震波动模拟中计入常Q滞弹性阻尼，可有效降低模拟波形的误差.就时域有限差分和有限元模拟而言，常基于广义标准线性体建立阻尼介质的时域本构逼近.广义标准线性体由若干标准线性体并联得到，增加标准线性体个数能有效提高模拟精度，但计算量及计算存储将成倍增长.目前尚未有普适的标准线性体个数优化取值方案.本文基于广义标准线性体参数的非线性优化拟合方法，详细分析了时域本构逼近误差的影响因素，清楚揭示了逼近误差仅取决于频带宽度，与频带上下限取值无关这一特性，阐明了构建具有普适性标准线性体个数优化取值方案的可行性.论证了波形模拟精度主要取决于波传播距离与模拟波长的比值以及标准线性体的个数取值.综合考虑上述两个控制因素，结合在波动正反演问题中广为采纳的波形时频误差衡量准则，对不同Q值介质给出了标准线性体个数优化取值表.进一步，本文提出采用不同个数标准线性体以近似不同Q值的阻尼介质时域本构，解决了以往波动数值模拟中统一采用相同个数标准线性体而导致的计算量及计算存储浪费或模拟精度低下等问题，并基于数值实验验证了这一方法的精度.本文工作对推进滞弹性介质波动数值模拟及其在全波形反演问题中的应用具有理论价值和实践意义.  相似文献   

A model‐based data‐driven dictionary learning for seismic data representation          下载免费PDF全文

Can Evren Yarman  Rajiv Kumar  James Rickett 《Geophysical Prospecting》2018,66(1):98-123

Planar waves events recorded in a seismic array can be represented as lines in the Fourier domain. However, in the real world, seismic events usually have curvature or amplitude variability, which means that their Fourier transforms are no longer strictly linear but rather occupy conic regions of the Fourier domain that are narrow at low frequencies but broaden at high frequencies where the effect of curvature becomes more pronounced. One can consider these regions as localised “signal cones”. In this work, we consider a space–time variable signal cone to model the seismic data. The variability of the signal cone is obtained through scaling, slanting, and translation of the kernel for cone‐limited (C‐limited) functions (functions whose Fourier transform lives within a cone) or C‐Gaussian function (a multivariate function whose Fourier transform decays exponentially with respect to slowness and frequency), which constitutes our dictionary. We find a discrete number of scaling, slanting, and translation parameters from a continuum by optimally matching the data. This is a non‐linear optimisation problem, which we address by a fixed‐point method that utilises a variable projection method with ?₁ constraints on the linear parameters and bound constraints on the non‐linear parameters. We observe that slow decay and oscillatory behaviour of the kernel for C‐limited functions constitute bottlenecks for the optimisation problem, which we partially overcome by the C‐Gaussian function. We demonstrate our method through an interpolation example. We present the interpolation result using the estimated parameters obtained from the proposed method and compare it with those obtained using sparsity‐promoting curvelet decomposition, matching pursuit Fourier interpolation, and sparsity‐promoting plane‐wave decomposition methods.  相似文献   

气举反循环钻进井壁稳定及适用性探讨          下载免费PDF全文

郑伯乐  郑秀华  段晨阳  叶宏宇 《探矿工程》2020,47(6):13-18

气举反循环工艺具有钻进效率高、携带岩屑能力强、防漏效果好以及钻头寿命长等优点，同时还可以提高流体矿产的产能。但是一般认为气举反循环钻进抽吸作用会产生负压，不利于井壁稳定，不宜在松散地层应用。本文通过计算气举反循环钻进环空水力参数，并从环空压力以及冲洗液流态、流速等方面探讨研究气举反循环钻进中井壁稳定及其适用性，指出通过选取合适的钻具组合以及调节冲洗液性能，可使气举反循环工艺对不同地层的适应性更广。  相似文献