Bidirectional shaking table tests of a low-cost friction sliding system with flat-inclined surfaces     

Miguel B. Brito  Mitsuyoshi Akiyama  Yoshitaka Ichikawa  Hiroki Yamaguchi  Riki Honda  Naomitsu Ishigaki 《地震工程与结构动力学》2020,49(8):817-837

A novel low-cost friction sliding system for bidirectional excitation is developed to improve the seismic performance of reinforced concrete (RC) bridge piers. The sliding system is a spherical prototype developed by combining a central flat surface with an inclined spherical segment, characterized by stable oscillation and a large reduction in response accelerations on the flat surface. The inclined part provides a restoring force that limits the residual displacements of the system. Conventional steel and concrete are employed to construct a flat-inclined spherical surface atop an RC pier. The seismic forces are dissipated through the frictions generated during the sliding movements; hence, the seismic resilience of bridges can be ensured with a low-cost design solution. The proposed system is fabricated utilizing a mold created by a three-dimensional printer, which facilitates the use of conventional concrete to construct spherical shapes. The concrete surface is lubricated with a resin material to prevent abrasion from multiple input ground motions. To demonstrate the effectiveness of the system, bidirectional shaking table tests are conducted in the longitudinal and transverse directions of a scaled bridge model. The effect of the inclination angle and the flat surface size is investigated. The results demonstrate a large decrease in response acceleration when the system exhibits circular sliding displacement. Furthermore, the inclination angle that generates the smallest residual displacement is identified experimentally.  相似文献   

美国出口管制下中国外贸风险的省域地理差异     

姜辉 《地理科学》2020,40(10):1618-1626

从总贸易、出口、进口、外资和人员5个视角构建对美风险系数，测度和比较各省区市对美外贸风险的地理差异。结果表明：上海、浙江和福建与美国的进出口贸易规模最大，对美国市场的依赖程度最高，面临的综合外贸风险最大；河南尤其需要防范对美国的出口风险；海南、新疆、天津和西藏等需要加强从美国进口的风险管理；重庆除了需要防范对美出口风险外，还因为实际利用美资最多且依赖程度最大，亟需加强外资风险管理。宁夏和山西虽然从美国的引资规模不大，但是对美资的依赖程度最高，亟需提升外资多元化水平。从人员跨境流动风险来看，上海、北京和浙江面临的风险最大。中国各省区市在应对美国出口管制时应该加强外贸风险的识别和管理，针对不同的风险采取差别化的防范和化解措施。  相似文献   

A sand-production control system for gas production from clayey silt hydrate reservoirs     

《China Geology》2019,2(2):121-132

Sand production is a crucial problem during the process of extracting natural gas from hydrate reservoirs. To deal with sand-production problems systematically, a sand-production control system (SCS) is first proposed in this paper, specialized for pore-distributed clayey silt hydrate reservoirs. Secondly, a nodal system analysis method (NSAM) is applied to analyze the sand migration process during hydrate exploitation. The SCS is divided into three sub-systems, according to different sand migration mechanisms, and three key scientific problems and advances in SCS research in China Geological Survey are reviewed and analyzed. The maximum formation sanding rate, proper sand-control gravel size, and borehole blockage risk position were provided for clayey hydrate exploitation wells based on the SCS analysis. The SCS sub-systems are closely connected via bilateral coupling, and coordination of the subsystems is the basis of maintaining formation stability and prolonging the gas production cycle. Therefore, contradictory mitigation measures between sand production and operational systems should be considered preferentially. Some novel and efficient hydrate exploitation methods are needed to completely solve the contradictions caused by sand production.© 2019 China Geology Editorial Office.  相似文献   

利用GLAS激光测高数据评估DSM产品质量及精度优化   总被引：2，自引：0，他引：2  

胡柳茹  唐新明  李国元  付冬暇  窦显辉  赵世湖 《测绘通报》2019,(11):39-43

提出了一种利用卫星激光测高数据直接优化提升数字表面模型（DSM）产品精度的方法。选取境外中亚地区的资源三号DSM开展试验，通过采用多准则约束方法提取激光高程控制点，分别利用偏度、中值、线性、二次多项式等进行DSM误差修正，发现4种模型均能有效消除DSM系统误差，其中基于二次多项式的方法更适用于平地和丘陵地貌，线性模型更适用于高山地貌。试验验证了采用卫星激光测高数据优化境外DSM技术流程的可行性，最终可提高DSM的绝对高程精度。  相似文献   

郯庐断裂带南段继承性断裂构造控矿模式研究及其应用效果——以皖东北五河金矿整装勘查为例     

汪青松  张顺林  张金会  张家嘉  尤淼 《地质学报》2020,94(10):2965-2977

郯庐断裂带南段的皖东北地区地质构造复杂，多为厚覆盖区，找矿难度大。由于控矿条件难以调查清楚，缺乏具有区域特色的勘查理论指导，区内金矿勘查长期没有取得突破成果。笔者依托五河金矿整装勘查项目，进行了区域重磁异常特征和成矿规律分析研究，发现皖东北地区北东- 北北东向重力低异常具有弧形条带特征，并以郯庐断裂带为界，大致具有旋转对称性。重磁异常保存印支期构造格架痕迹信息，反映了郯庐断裂带南段时空演化特征，显示了北东- 北北东向主要断裂构造具有继承性，形成于印支期，燕山期继续活动，控制白垩纪“红层盆地”和燕山期成岩成矿作用。中低温热液型金多金属矿床和矽卡岩型铜金矿床是皖东北地区主要矿床类型，均受继承性断裂构造控制。结合郯庐断裂的演化特征，利用物探成果引领地质理论创新，提出了郯庐断裂带南段矿床的“继承性断裂构造控矿模式”。根据继承性断裂构造形成机理分析其空间分布规律，总结了矿化蚀变构造带的物探异常标志，解决了皖东北覆盖区成矿预测与找矿靶区圈定难题，在五河金矿整装勘查区应用取得了重要找矿成果，圈定6个金矿找矿靶区，得到了钻探验证，已发现中型规模金矿床2处、小型3处，估算潜在资源量可达特大型规模，实现了安徽省境内郯庐断裂带金矿找矿的重大突破。  相似文献   

深厚软土场地基岩地震动反演——以天津波为例          下载免费PDF全文

梁建文  张萍  何颖 《世界地震工程》2020,(3):001-11

根据天津波地表加速度记录和相应实测场地钻孔资料，采用等效线性化方法模拟土体非线性，进行了深厚软土场地基岩地震动反演，研究了频率截断对深厚软土场地基岩地震动反演的影响，为天津波地表加速度记录提供了相应的基岩地震动输入。研究表明:不同截断频率情况下，反演得到的基岩地震动峰值和反应谱曲线形状均相差悬殊，但反演后再正演所得到的地面运动与原地表记录相比，加速度时程曲线形状和峰值大小、反应谱曲线形状和峰值大小均非常接近；可根据工程需要对地表加速度记录进行不同频率的截断，反演得到所需强度的基岩地震动。  相似文献   

基于专利的石漠化治理技术分析     

宁宝英  马建霞  姜志德 《中国沙漠》2019,39(5):135-142

石漠化是发生面积仅次于沙漠化的荒漠化类型，已成为中国西南喀斯特山区可持续发展的主要障碍，其治理与恢复是复杂的系统工程。从治理技术层面，以1 159组简单专利族为数据基础，揭示国内石漠化治理技术类别分布和主要领域。在对专利进行简要计量分析以提供概貌认识的基础上，通过阅读专利摘要内容，采用自下而上的聚类方法将当前专利划分为石漠化判断、治理、产业经济3个大类，监测与评价、科研仪器、生物治理、工程治理、化学治理、综合治理、综合产业、农业和工业9个中类，更细分至雨水搜集净化等42个小类。根据专利数量认定的四大主要技术领域为：工程治理（8.63%）、水分利用（12.51%）、栽培种植（27.52%）、植物资源加工（9.67%），占总量的58.33%，专利领域分布相对集中。对主要技术领域采用内容分析法，提取工程治理具体措施、集雨工具、植物、加工制品等的信息并对其进行了详细阐述，指出目前专利技术中的问题：石漠化地区特有的植物资源众多，但目前加工层次偏低，应在拓展加工类型、延长加工产业链条、发掘植物药用和日用价值方面加大研发力度；防止土壤漏失技术、设施农业技术和生命基因技术亟待发展。分析可为全面认识国内石漠化治理技术提供专利视角的参照。  相似文献   

Experimental investigation on a cabin-suspended catamaran in terms of motion reduction and wave energy harvesting by means of a semi-active motion control system     

《Applied Ocean Research》2019

A novel concept catamaran equipped with a suspended cabin, named Wave Harmonizer Type 4 (WHzer-4), is proposed and evaluated. The mass-spring-mass system is constructed by mounting four sets of suspensions in-between the cabin and the twin-hull. Two sets of dual motor/generators (M/Gs) are attached on the center beam of the cabin's deck fore and aft. Each shaft-end of the dual M/Gs is connected to the twin-hull through a rack-pinion gear unit. In this way the vertical relative motion between the cabin and the twin-hull can be transferred into the rotational motion of the M/Gs, and vice versa. A semi-active motion control system, which contains a proportional-integral (PI) controller, is designed and applied to each of the dual M/Gs for the aim of absorbing wave energy under the condition of suppressing the local vertical velocity of the cabin as much as possible. A 1/5 scale model ship with a length of 1.6 m is built, and a forced-oscillation bench test is implemented to validate the performance of the control system. Then, a series of towing tank tests is carried out in regular head waves. The heave and pitch responses of the cabin, those of the twin-hull and the corresponding wave energy capture width ratio (CWR) at five control scenarios and two reference scenarios are investigated. Discussion on the results of the tank test shows that the motion reduction of the cabin and the wave energy harvesting can be achieved simultaneously at a few wave conditions. However, at other conditions, although noticeable amount of wave energy is harvested, motion reduction of the heave and pitch of the cabin could not be obtained at the same time. It is suggested that varying the gain settings of the PI controllers according to the location of the controllers may improve the effectiveness of the proposed control system.  相似文献   

Hydrological management strategies for the control of algal blooms in regulated lowland rivers     

Jian Li  Wei Yin  Haiyan Jia  Xiaokang Xin 《水文研究》2021,35(6):e14171

Reservoirs of lowland floodplain rivers with eutrophic backgrounds cause variations in the hydrological and hydraulic conditions of estuaries and low-dam reservoir areas, which can promote planktonic algae to proliferate and algal bloom outbreaks. Understanding the ecological effects of variations in hydrological and hydraulic processes in lowland rivers is important for algal bloom control. In this study, the middle and lower reaches of the Han River, China, a typical regulated lowland river with a eutrophic background, are selected. Based on the effect of hydrological and hydraulic variability on algal blooms, a hydrological management strategy for river algal bloom control is proposed. The results showed that (a) differences in river morphology and background nutrient levels cause significant differences in the critical threshold flow velocities for algal bloom outbreaks between natural river and low-dam reservoir sections; there is no uniform threshold flow velocity for algal bloom control. (b) There are significant differences in the river hydrological/hydraulic conditions between years with and without algal blooms. The average river flow, water level and velocity in years with algal blooms are significantly lower than those in years without algal blooms. (c) For different river sections where algal blooms occur and to meet the threshold flow velocities, the joint operation of cascade reservoirs and diversion projects is an effective method to prevent and control algal blooms in regulated lowland rivers. This study is expected to deepen our understanding of the ecological significance of special hydrological processes and guide algal bloom management in regulated lowland rivers.  相似文献   

Dynamic loading tests and seismic response analysis of a stud-type damper composed of multiple friction units with disc springs     

Takeshi Sano  Kazutaka Shirai  Yasumasa Suzui  Yoshikazu Utsumi 《地震工程与结构动力学》2020,49(13):1259-1280

This paper presents an experimental study on the performance of a shear-sliding stud-type damper composed of multiple friction units with high-tension bolts and disc springs. A numerical evaluation of the response reduction effects achieved by the stud-type damper is also presented. In dynamic loading tests, the behavior of stud-type multiunit friction damper specimens was investigated. Three different full-scale damper specimens, which were composed of five, six, or seven friction units with two or four sliding surfaces, were incorporated into loading devices for testing. The stud-type friction dampers demonstrated stable rigid-plastic hysteresis loops without any remarkable decrease in the sliding force even when subjected to repetitive loading, in addition to showing no unstable behavior such as lateral buckling. The damper produced a total sliding force approximately proportional to the number of sliding surfaces and friction units. The total sliding force of the stud-type damper can thus be estimated by summing the contributions of each friction unit. In an earthquake response simulation, the control effects achieved by stud-type dampers incorporated into an analytical high-rise building model under various input waves, including long-period, long-duration and pulse-like ground motions, were evaluated. A satisfactory response reduction was obtained by installing the developed stud-type dampers into the main frame without negatively impacting usability and convenience in terms of building planning.  相似文献