利用爆破事件分析不同速度模型下常规定位方法定位结果     

李兴泉  吴朋  唐淋 《地震地磁观测与研究》2020,(1):25-32

地震定位对速度模型的依赖性很强.四川地区地形复杂,常规工作中可选取多种速度模型进行定位.川西龙门山断裂带为东南部四川盆地和西北部青藏高原东部山区的明显分界线,近年在此断裂带上发生多次较大地震.对发生在该断裂带附近的6个爆破事件和15个天然地震重新定位,并对比结果.研究表明,相同台站包围情况下,川滇3D速度模型稳定性最好,但对浅表爆破不太准确.相比HypoSat(一维速度模型)组合,台站分布对Hypo2000(一维速度模型)和Hypo2000(赵珠速度模型)组合的定位结果影响较大.  相似文献   

长江河口潮波传播机制及阈值效应分析   总被引：1，自引：0，他引：1  

张先毅  黄竞争  杨昊  欧素英  刘锋  蔡华阳  杨清书 《海洋与湖沼》2019,50(4):788-798

河口潮波传播过程受沿程地形(如河宽辐聚、水深变化)及上游径流等诸多因素影响,时空变化复杂。径潮动力非线性相互作用研究有利于揭示河口潮波传播的动力学机制,对河口区水资源高效开发利用具有重要指导意义。本文基于2007—2009年长江河口沿程天生港、江阴、镇江、南京、马鞍山、芜湖的逐日高、低潮位数据及大通站日均流量数据,统计分析不同河段潮波衰减率与余水位坡度随流量的变化特征,结果表明潮波衰减率绝对值与余水位坡度随流量增大并不是单调递增,而是存在一个阈值流量和区域,对应潮波衰减效应的极大值。为揭示这一阈值现象,采用一维水动力解析模型对研究河段的潮波传播过程进行模拟。结果表明,潮波传播的阈值现象主要是由于洪季上游回水作用随流量加强,余水位及水深增大,导致河口辐聚程度减小,而余水位坡度为适应河口形状变化亦有所减小,从而形成相对应的阈值流量和区域。  相似文献   

花岗岩残积土动态冲击性能的SHPB试验研究     

刘新宇  张先伟  岳好真  孔令伟  徐超 《岩土力学》2020,41(6):2001-2008

为研究花岗岩残积土的动态冲击性能，开展了高速冲击下的分离式霍普金森压杆（SHPB）试验，与常规应变率下的试验结果比较，分析了高应变率对花岗岩残积土的应力?应变特性和强度的影响。结果表明：低、高应变率下的花岗岩残积土的?-?a（轴向应力?轴向应变）曲线均呈现出软化型。随着应变率 增加，?-?a曲线向?a增大的方向移动，破坏应变?af增加。但高应变率下?af增加的程度更加明显。花岗岩残积土的峰值强度普遍具有应变率依赖性，二者可用直线关系拟合，但低、高应变率下的拟合关系并不一致。提出了率敏性因子m定量评价依赖性强弱。研究发现，随着应变率的提高，强度的应变率依赖性减弱，低应变率下的m为26.694，而高应变率下仅为0.013。相关试验结果指出，高速冲击荷载对土体总体有害。工程中应该采取合理措施控制冲击荷载的危害。该研究有助于深化花岗岩残积土动态冲击性能的理解，为相关工程的施工与设计提供技术参考。  相似文献   

江苏海岸中部近岸冬季潮汐和潮流特征     

王逸涵  王韫玮  于谦  蔡辉  高抒 《海洋科学》2019,43(10):66-74

南黄海西侧的江苏海岸近岸区域,素以地形复杂、潮流强劲、悬沙输运剧烈著称,但是较长期的同步潮位和潮流观测数据仍然缺乏,尤其是在近岸(20 km)浅水(20 m)区域。2014年1月在大丰港附近开展了连续潮位和潮流观测,获得的数据揭示了一系列特征。此地潮汐潮流为正规半日潮,浅水分潮显著。平均潮差为3.05 m,最显著的两个分潮为M2和S2分潮,振幅分别为1.45 m和0.52 m。潮流最显著的半日分潮M2分潮和最显著的浅水分潮M4分潮在沿岸方向上振幅分别为0.84m/s和0.12m/s,在跨岸方向上振幅分别为0.24 m/s和0.01 m/s,沿岸方向占绝对优势。潮波的沿岸传播介于前进波和驻波之间,驻波的特征稍强。M2分潮潮流椭圆最大流(长轴)方向为南偏东7.4°。存在冬季沿岸向北的余流,垂向平均值的大小为2.2 cm/s。以上潮汐潮流特征为该区域海洋物质输运研究提供了基础资料。  相似文献   

基于GIS的“一带一路”地区气温插值方法比较研究     

杨艳昭  郎婷婷  张超  贾琨 《地球信息科学学报》2020,22(4):867-876

“一带一路”倡议是新时期中国为加强对外开放提出的全球化合作倡议,资源环境的优化配置对全球化发展意义重大。气温作为重要的基础数据和输入要素,对其进行空间化处理是实现大尺度区域资源环境优化配置的前提。本文基于地理信息技术（GIS）,运用距离平方反比法（IDS）、协同克里格法（CK）、回归距离平方反比法（RIDS）和回归协同克里格法（RCK）,对“一带一路”地区1980—2017年的2679个气象站点的月平均气温和年平均气温数据进行插值,获得了“一带一路”地区10 km分辨率的气温空间分布数据。交叉验证结果表明：① IDS、CK、RIDS和RCK插值法在整体上均较好地展示了“一带一路”地区气温的地理空间分布规律,4种插值方法的月均气温的均方根误差分别在1.93~2.43、1.78~2.14、1.31~2.23和1.23~1.92 ℃之间;年均气温的均方根误差分别为1.94、1.83、1.37和1.27 ℃;② 在“一带一路”地区,加入协变量分析的CK插值精度整体优于IDS,并且削弱了IDS的极值现象;③ RIDS和RCK对年均气温的插值精度分别较IDS和CK提高了29.4%和30.6%,表明加入地理要素并进行残差修正的插值精度得到了进一步提高。总体来看,RCK插值法对气温数据的插值精度最高,可以考虑将此方法作为“一带一路”地区温度等气象要素的插值方法。  相似文献   

Direct finite element method for nonlinear earthquake analysis of concrete dams: Simplification,modeling, and practical application     

Arnkjell Løkke  Anil K. Chopra 《地震工程与结构动力学》2019,48(7):818-842

A direct finite element (FE) method for nonlinear response history analysis of semi-unbounded dam-water-foundation systems has recently been presented. The analysis procedure employs standard viscous-damper absorbing boundaries to model the semi-unbounded foundation and fluid domains and specifies the seismic input as effective earthquake forces—determined from a control motion defined at the foundation surface—at these boundaries. Presented in this paper are several simplifications to this direct FE method that greatly facilitates its implementation in commercial FE software. Also addressed is the modeling of the principal nonlinear mechanisms for concrete dams, calibration of damping in the numerical model to ensure consistency with values measured at actual dams, and practical procedures for implementation of the direct FE method with a commercial FE program.  相似文献   

Seismic performance of buildings retrofitted with nonlinear viscous dampers and adjacent reaction towers     

《地震工程与结构动力学》2018,47(5):1329-1351

An effective strategy of seismic retrofitting consists of installing nonlinear viscous dampers between the existing building, with insufficient lateral resistance, and some auxiliary towers, specially designed and erected as reaction structures. This allows improving the seismic performance of the existing building without any major alteration to its structural and nonstructural elements, which makes this approach particularly appealing for buildings with heritage value. In this paper, the nonlinear governing equations of the coupled lateral‐torsional seismic motion are derived from first principles for the general case of a multistory building connected at various locations in plan and in elevation to an arbitrary number of multistory towers. This formulation is then used to assess the performance of the proposed retrofitting strategy for a real case study, namely, a 5‐story student hall of residence in the city of Messina, Italy. The results of extensive time‐history analyses highlight the key design considerations associated with the stiffness of the reaction towers and the mechanical parameters of the nonlinear viscous dampers, confirming the validity of this approach.  相似文献   

A probabilistic framework for estimating the residual drift of idealized SDOF systems of non‐degrading conventional and damped structures     

Jack Wen Wei Guo  Constantin Christopoulos 《地震工程与结构动力学》2018,47(2):479-496

This paper presents a general framework for predicting the residual drift of idealized SDOF systems that can be used to represent non‐degrading structures, including those with supplemental dampers. The framework first uses post‐peak oscillation analysis to predict the maximum ratio of residual displacement to the peak transient displacement in a random sample. Then, residual displacement ratios obtained from nonlinear time‐history analyses using both farfield and near‐fault‐pulse records were examined to identify trends, which were explained using the oscillation mechanics of SDOF systems. It is shown that large errors can result in existing probability models that do not capture the influence of key parameters on the residual displacement. Building on the observations that were made, a general probability distribution for the ratio of residual displacement to the peak transient displacement that more accurately reflects the physical bounds obtained from post‐peak oscillation analysis is proposed for capturing the probabilistic residual displacement response of these systems. The proposed distribution is shown to be more accurate when compared with previously proposed distributions in the literature due to its explicit account of dynamic and damping properties, which have a significant impact on the residual displacement. This study provides a rational basis for further development of a residual drift prediction tool for the performance‐based design and analysis of more complex multi‐degree‐of‐freedom systems.  相似文献   

Influence of seismic motions on behavior of piles in liquefied soils          下载免费PDF全文

Kaustav Chatterjee  Deepankar Choudhury 《国际地质力学数值与分析法杂志》2018,42(3):516-541

In the present study an analytical procedure based on finite element technique is proposed to investigate the influence of vertical load on deflection and bending moment of a laterally loaded pile embedded in liquefiable soil, subjected to permanent ground displacement. The degradation of subgrade modulus due to soil liquefaction and effect of nonlinearity are also considered. A free headed vertical concrete elastic nonyielding pile with a floating tip subjected to vertical compressive loading, lateral load, and permanent ground displacement due to earthquake motions, in liquefiable soil underlain by nonliquefiable stratum, is considered. The input seismic motions, having varying range of ground motion parameters, considered here include 1989 Loma Gilroy, 1995 Kobe, 2001 Bhuj, and 2011 Sikkim motions. It is calculated that maximum bending moment occurred at the interface of liquefiable and nonliquefiable soil layers and when thickness of liquefiable soil layer is around 60% of total pile length. Maximum bending moment of 1210 kNm and pile head deflection of 110 cm is observed because of 1995 Kobe motion, while 2001 Bhuj and 2011 Sikkim motions amplify the pile head deflection by 14.2 and 14.4 times and bending moment approximately by 4 times, when compared to nonliquefiable soil. Further, the presence of inertial load at the pile head increases bending moment and deflection by approximately 52% when subjected to 1995 Kobe motion. Thus, it is necessary to have a proper assessment of both kinematic and inertial interactions due to free field seismic motions and vertical loads for evaluating pile response in liquefiable soil.  相似文献   

Effects of the improper modeling of viscous damping on the first-mode and higher-mode dominated responses of base-isolated buildings     

Hamidreza Anajafi  Ricardo A. Medina  Erin Santini-Bell 《地震工程与结构动力学》2020,49(1):51-73

In many finite element platforms, a classical global damping matrix based on the elastic stiffness of the system (including isolators) is usually developed as part of the solution to the equations of motion of base-isolated buildings. The conducted analytical and numerical investigations illustrate that this approach can lead to the introduction of unintended damping to the first and higher vibration modes and the spurious suppression of the respective structural responses. A similar shortcoming might be observed even when a nonclassical damping model (ie, an assembly of the superstructure and isolation system damping sub-matrices) is used. For example, the use of Rayleigh damping approach to develop the superstructure damping sub-matrix can lead to the undesired addition of damping to the isolated mode arising from the mass-proportional component of the superstructure damping. On the other hand, the improper use of nonclassical stiffness-proportional damping (eg, determining the proportional damping coefficient, β_k , based on the first mode) can result in assigning significant damping to the higher-modes and the unintended mitigation of the higher-mode responses. Results show that a nonclassical stiffness-proportional model in which β_k is determined based on the second modal period of a base-isolated building can reasonably specify the intended damping to the higher modes without imparting undesirable damping to the first mode. The nonclassical stiffness-proportional damping can be introduced to the numerical model through explicit viscous damper elements attached between adjacent floors. In structural analysis software such as SAP2000®, the desired nonclassical damping can be also modeled through specifying damping solely to the superstructure material.  相似文献