排序方式： 共有5条查询结果，搜索用时 15 毫秒
1
1.
基于ABAQUS的海底管道静水压溃压力的敏感性分析 总被引：1，自引：0，他引：1
局部屈曲压溃是海底管道发生稳定性破坏的一种形式,随着管道的刚度相对越来越柔,厚度相对越来越薄,管道发生屈曲压溃的问题也越来越突出。运用ABAQUS有限元分析软件进行管道的非线性屈曲分析,确定不同径厚比、初始椭圆度、轴向拉力和弯矩作用下的管道静水压溃压力,以分析静水压溃压力对这些因素的敏感性。 相似文献
2.
Yang Cao 《Marine Georesources & Geotechnology》2013,31(4):477-487
AbstractThe deep-water pipeline is the main means of transportation in offshore oil and gas development engineering. The deep-water pipeline may incur lateral global buckling due to the high temperature and pressure that are applied on the pipeline to ensure the contents’ liquidity. With the increasing operating water depth, a higher temperature and pressure are applied to the pipeline, causing large lateral deformation and a large bending moment. Due to the inhomogeneous distribution of the bending moment on the cross-section, different points on the cross-section will deform differently. This kind of deformation causes the cross-section to turn into an oval ring. The cross-section ovalization caused by global buckling was rarely analyzed in former engineering practice since the load is relatively low. With the increase in operation water depth and operation load, the ovality caused by global buckling is noticeable. This article analyzed cross-section ovalization caused by pipeline lateral global buckling with a numerical simulation method. The pipelines with different initial cross-section shapes were simulated, and the influence of several impact factors, including load, pipeline and soil factors on the ovality of the cross-section, were analyzed. The results show that the initial cross-section shape type has little effect on the pipeline ovalization pattern. The initial ovality of the pipeline with an oval ring cross-section shape has little influence on the residual ovality. Among all the factors analyzed in this paper, the pressure difference is the primary factor that should be considered in a pipeline ovalization check. 相似文献
3.
卷管式铺管法在海管铺设中的应用愈发广泛,在铺设作业中管道会发生几何非线性变形,导致出现复杂的力学性能变化。针对管道在上卷、退卷过程中的屈服变化过程,通过弹塑性理论进行分析,推导出管道退卷后残余轴向应力的解析解;随后利用有限元软件ABAQUS建立模型实例,对比解析解与有限元模型,两者的计算结果基本吻合。基于上述有限元模型,研究上卷时的张力和退卷时的后张力对椭圆度、截面轴向应力和剪切应力的影响,并进行敏感性分析。模拟结果表明张力和后张力变化会影响管道截面的变形程度,退卷后截面上残余的轴向应力远高于剪切应力,并且通过敏感性分析,得到了残余椭圆度、残余应力随张力和后张力变化的规律。研究可为卷管铺设过程中张力和后张力的选择提供参考和借鉴。 相似文献
4.
Zhang Wenge Li Dexiang
Associate Professor Dalian Railroad Institute Dalian .
Engineer Dalian New Shipyard Dalian 《中国海洋工程》1997,(4)
-The first-yield collapse of submarine pipelines with an initial out-of-roundness imperfection un-der combined bending and external pressure load is formulated by means of the Von.Mises yield criterion.The formula reduces to Timoshenko and Gere's expression in the case of external pressure load alone.Theinfluence curves of various parameters on the yield strength are presented,the collapse of submarinepipelines in a deep water region is numerically predicted,and the effect of pre-yield nonlinear bending onthe yield strength is also examined. 相似文献
5.
1