排序方式： 共有67条查询结果，搜索用时 15 毫秒
1.
Deep-sea microorganism research has become a hot topic in life science, owing to its special value in high pressure and low temperature environment. If not kept the in-situ low temperature and high pressure, it will cause the microorganism to lose its activity and lead to a waste of resources. A freeze-sediments valve presents a promising solution to maintain the low temperature and high pressure in situ, improve the success rate of sampling and shorten the sampling time. A series of experiments were conducted to characterize the freeze-sediments valve, including the sampling time without leakage, adaptation to different sediments and the effect of the length, etc. Most important of all, temperature change of sediments is observed in all experiments. Experimental results indicated that the freeze-sediments valve was formed in 5 min without leakage and the freeze-sediments valve could be applied to different sediments without limitations on sediments type and mineral content. Considering the pressure retaining capacity and formation time of freeze-sediments valve, it was found that the freeze-sediments valve with a length of 60–80 mm has good pressure retaining capacity whose value was 41.3–48.4 Mpa and short formation time which was 5 min. Precooling the sampler could be used to shorten the sampling time in the actual environment application. This sampling technique can play a vital role in maintaining in-situ low temperature at −2 to −4 ° Celsius in all the experiments. According to the tests, the sampling technique based on the freeze-sediments valve had the potential to solve the problem of keeping in-situ temperature, low sampling success rate and long sampling time in the future. 相似文献
2.
基于壳板和齿舌形态对中国沿岸几种常见多板纲软体动物的分类研究 总被引：1，自引：1，他引：0
多板纲软体动物统称石鳖,是软体动物门较为低等的一个类群,在软体动物的系统进化中占有重要的地位。但有关我国沿海多板纲软体动物的调查研究十分欠缺,而且对中国沿海多板纲的分布状况和区系特点尚不明确,并存在着一些鉴定错误和分类混乱现象。本研究利用10%Na OH溶液处理齿舌部获取齿舌带和壳板的方法,通过扫描电镜和显微镜观察拍照,对我国沿岸常见多板纲软体动物中5科7属13种的齿舌和壳板形态结构进行了描述,并进行了比较研究。 相似文献
3.
埕岛油田位于渤海西南部极浅一浅海地区，是一个大型潜山披覆构造油田。随着埕岛油田开采力度加强，地层亏空十分严重，作业过程中的地层漏失是困绕埕岛油田油层保护的一大难题。据此介绍了胜利油田海上埕岛油田油层保护的一项新技术——井下双向流动阀防漏失技术的应用情况，阐述了井下双向流动阀的结构、原理以及应用后对油层保护所起到的作用。 相似文献
4.
The species of Epithemia ocellata (Ehr.) Kütz. from Northeastern China were observed by scanning electron microscopy (SEM). The studies on silica valve formation in different stages were made. At the early stage, a Y-shaped raphe sternum was found. Areolae were made from virgae and vimines. In immature valves, the canal formation before the raphe fissure is visible. The raphe system, virgae and vimines (areolae) might be the early siliceous elements of the valve during morphogenesis. The formations of virgae and vimines are similar to that of Gephyria media W. Arnott. Rows of silica papillae formed gradually on the face of the valve. After the areolae were covered with silica and form rows of papillae, the outer valve surface could become mature. Details of the internal costae were observed in mature valves. 相似文献
5.
iCAP 6300电感耦合等离子体发射光谱仪的常规维护方法 总被引：1，自引：1，他引：0
电感耦合等离子体发射光谱仪在使用过程中,由于控制气体流量的电磁阀出现机械性移位,致使工作气流量过于偏大或偏小,对进样系统及分析数据产生不利影响;长期频繁使用条件下,由于控制光学系统的机械定位装置的磨损,致使谱峰坐标偏离而影响仪器灵敏度;很长时间不能"引燃"等离子体,检查进样系统和氩气纯度并没有发现异常,需要验证RF发生器有无功率输出时有一定的困难;在等离子体工作时产生的高温尾气的长期作用下,难免造成点火头末端铜丝的锈蚀,致使点火头放电微弱,不能"引燃"等离子体。因此,为保证仪器的正常运行,提高工作效率,确保检测数据的准确度,实验室应建立健全电感耦合等离子体发射光谱仪维护保养方案,解决上述问题。本文结合实际工作经验,以iCAP 6300电感耦合等离子体发射光谱仪为例,提出可以借助"Manufacturing and Service.exe"程序校正工作气流量,验证RF发生器是否输出功率;利用C 193.091 nm谱线为基准校正谱线修正CID检测器的谱峰坐标系统;另外,对点火头、分析软件数据库及主机灰尘的清理也进行了详细的维护说明,这些措施有益于保障仪器的性能及提高设备的利用率。 相似文献
6.
广州航空邮件处理中心位于岩溶发育地区,场区内存在大量土洞、溶洞等不良地质现象。该建筑物拟采用静压桩基础。为保证建筑物及场道安全,须对场区土洞进行处理。结合场地具体情况和施工工期要求,首先对大体积土洞进行泵注细石砼骨料充填处理,以消除地面大面积塌陷的危险,消灭压桩机械施工安全隐患,然后开始进行静压桩基础施工,同时在场地允许区域对中小体积土洞、桩端软土层等分别进行泵注砂浆骨料和袖阀注浆处理．以确保洞体密实和保证桩基承载力。通过对处理工艺、处理范围的比较筛选和对质量控制要点、施工技术要点的分析提炼．达到了施工简便、造价合理、安全高效的目的,并采用骨料取芯检测、土体标贯试验和压缩试验、洞体物探等多种检测手段,完全达到了设计要求,取得了良好的工程效果和经济效益。 相似文献
7.
研制了 30 0双向自调导叶透平试验机组 ,安装在 10 0 0活塞式往复流透平试验台上 ,对两种叶轮方案和 6种不同喷咀、扩压器进行了不同活塞行程、不同周期和不同恒定输出电压下性能试验。试验结果表明在喷咀出口角α1=2 1 5°、扩压器入口角α2 =6 5 5°和α1=2 4°、α2 =6 3°组合最佳 ,最高效率达 5 3 3% ,而且在宽广流量系数范围内 ,特别是大流量系数范围内都有较高效率。大大优于常用对称翼透平。将上下游导叶固定 ,变成双向固定导叶透平。用No 1叶轮和 6种导叶出口角组合进行试验。表明最佳导叶出口角为 2 4°～ 30°,最高效率仍达 38 5 % ,比对称翼透平仍高许多 相似文献
8.
9.
10.
某钢筋混凝土箱形铁路桥发生不均匀沉降,经方案优化对比,采用了沉井射水掏土纠偏和塑料袖阀管注浆加固进行综合治理。介绍了其施工工艺和治理效果。 相似文献