Metallogeny of the Baiyangping Lead‐Zinc Polymetallic Ore Concentration Area,Northern Lanping Basin of Yunnan Province,China     

WANG Xiaohu  SONG Yucai  ZHANG Hongrui  LIU Yingchao  PAN Xiaofei  GUO Tao 《《地质学报》英文版》2018,92(4):1486-1507

The Lanping Basin in the Nujiang‐Lancangjiang‐Jinshajiang (the Sanjiang) area of northeastern margin of the Tibetan Plateau is an important part of eastern Tethyan metallogenic domain. This basin hosts a number of large unique sediment‐hosted Pb‐Zn polymetallic deposits or ore districts, such as the Baiyangping ore concentration area which is one of the representative ore district. The Baiyangping ore concentration area can be divided into the east and west ore belts, which were formed in a folded tectogene of the India‐Asia continental collisional setting and was controlled by a large reverse fault. Field observations reveal that the Mesozoic and Cenozoic sedimentary strata were outcropped in the mining area, and that the orebodies are obviously controlled by faults and hosted in sandstone and carbonate rocks. However, the ore‐forming elements in the east ore belt are mainly Pb‐Zn‐Sr‐Ag, while Pb‐Zn‐Ag‐Cu‐Co elements are dominant in the west ore belt. Comparative analysis of the C‐O‐Sr‐S‐Pb isotopic compositions suggest that both ore belts had a homogeneous carbon source, and the carbon in hydrothermal calcite is derived from the dissolution of carbonate rock strata; the ore‐forming fluids were originated from formation water and precipitate water, which belonged to basin brine fluid system; sulfur was from organic thermal chemical sulfate reduction and biological sulfate reduction; the metal mineralization material was from sedimentary strata and basement, but the difference of the material source of the basement and the strata and the superimposed mineralization of the west ore belt resulted in the difference of metallogenic elements between the eastern and western metallogenic belts. The Pb‐Zn mineralization age of both ore belts was contemporary and formed in the same metallogenetic event. Both thrust formed at the same time and occurred at the Early Oligocene, which is consistent with the age constrained by field geological relationship.  相似文献   

●●以下文章网络预出版（在线出版）于2022年12月20日，预计刊于《地质论评》2023年第69卷第1期(2023年1月15日发行纸质版）或2023年第69卷第2期（2023年3月15日发行纸质版）     

朱炜  张艳  韩润生  王磊  佘敏  魏平堂 《地质论评》2022,68(6):2022112011-2022112012

元素富集机制的研究是重现成矿过程和查明成矿机制的基础,有助于深化对矿床的认识,为找矿提供理论依据。本文总结了近年来关于铅锌元素的迁移与沉淀机制的研究及其应用,包括3种铅锌迁移沉淀模式,4种含铅锌流体驱动模式,铅锌的迁移形式及其沉淀机制;同时简述了我国高温高压实验的发展历程以及4种高温高压模拟实验方法。重点介绍了4种高温高压实验模拟方法及其研究现状：① 高压釜实验;② 热液金刚石压腔—激光拉曼实验;③ 熔融毛细硅管—激光拉曼实验;④ 计算机模拟实验。从封闭—平衡—静止到（半）开放—非平衡—流动、淬火分析到原位观察,应是今后高温高压实验的发展方向。以地质特征为基础,采用高温高压成岩成矿模拟实验结合计算机模拟,精细刻画成矿过程并揭示元素富集机制不仅是解决实际地质问题的有效手段,更是很长一段时间内要为之努力的方向。  相似文献   

基于Vulcan软件的山东莱州留村金矿区三维建模及资源量估值北大核心CSCD     

贾飞  胡跃亮  王永锋  张姗  柏瑞  周荣志  王俊洁  刘艳 《地质与勘探》2022,58(1):12-23

留村金矿位于山东莱州市城区西南12 km的留村断裂带上,是发育于古老变质岩中的小型石英脉型金矿。为深入研究该矿区地层、构造与矿体在地下的延伸分布情况,加快后续数字化矿山建设,山东黄金集团应用Vulcan矿业软件对矿区开展三维地质建模。在收集相关地质实物资料的基础上,通过建立地质数据库、数据转换、地质解译等系列功能操作建立了矿区地表、岩体、构造及矿体模型,并对其进行任意剖割划分,实现了矿区地层岩性、地质构造、矿体的三维可视化,促进了本区矿体赋存规律的研究以及三维空间的成矿预测。同时利用软件强大的数据处理功能对资源量进行估值,本次估值的金资源量为1984.18 kg,与原详查报告中提交的金资源量2009.34 kg误差仅为1.25%。经估值后的每个矿块段都被赋予了精确的资源量数据,为后续矿山采矿设计与排产计划提供了准确的数据支撑,助力实现数字化、智能化矿山建设。  相似文献   

不同氧化还原条件下铅锌矿尾砂中重金属元素活化迁移规律     

李晓艳  张青伟  洪松涛  袁雨婷  余金燕  潘俐傧  刘莹红 《吉林大学学报(地球科学版)》2022,52(2):434-441

以广西大厂镇鲁塘铅锌矿尾砂为研究对象,通过淋滤实验研究了不同氧化还原条件下尾砂中Cu、Cd、Zn、Pb和As等元素的活化和迁移规律。结果表明：经高浓度氧化、高浓度还原条件处理的尾矿表现为pH<7的酸性环境,经低浓度氧化环境条件处理的尾砂呈现pH>7的弱酸性至弱碱性环境;尾砂中Cu、Cd元素活化迁移受pH值的影响明显,即高浓度还原和高浓度氧化条件可以促进Cu和Cd元素的迁移,酸性条件对Cu和Cd元素的迁移起到促进作用;Zn与Cd元素存在竞争吸附关系,但二者仍有明显差别;Pb和As元素受到还原条件的影响,能有效促进Pb和As元素的释放迁移。在淋滤实验前期,铅锌矿的表面阻力较小,由于环境酸碱性的改变,初始尾砂对重金属元素的吸附位能发生变化,重金属元素初期迁移能力得到加强;淋滤后期,矿物颗粒表面由于发生氧化还原反应,促使颗粒表面的阻力增加,重金属元素的溶出量减少,迁移能力受到抑制。  相似文献   

内蒙古核桃坝地区铅锌与铀矿的期次关系探讨     

蒋孝君 《地质论评》2021,67(Z1):67z1097-67z1098

正核桃坝地区位于华北板块北缘多金属成矿带和沽源—红山子铀成矿带的交汇部位,具有优越的铀多金属成矿地质条件。近年来,核工业二〇八大队在核桃坝地区取得铀矿勘查突破,落实了铀矿产地。铀矿勘查中不仅发现了多个具有工业价值的铀矿体,还发现了许多较好的铅、锌、钼、铜、  相似文献   

广域电磁法深部找矿实验效果   总被引：1，自引：0，他引：1  

朱裕振  许聪悦 《物探与化探》2011,35(6):743-746

介绍了广域电磁法的基本原理、特点及广域视电阻率的定义。在内蒙古自治区某银铅锌矿进行了实验勘探工作,解释和推断了地电异常,并和可控源音频大地电磁法的效果进行了对比。研究结果表明:广域电磁法可以用较小的发收距获得较大的探测深度,勘探效率和精度较高,用于寻找深部金属矿的效果明显。  相似文献   

地球化学块体理论在青海沱沱河地区铅锌资源潜力预测中的应用   总被引：4，自引：0，他引：4  

刘长征  陈岳龙  许光  赵娟  李玥  李琳业  姬丙艳  汪元奎 《地学前缘》2011,18(5):271-282

以地球化学块体理论为基础的方法和技术确定了沱沱河铅锌地球化学块体的下限和含量级次,对沱沱河地区铅锌元素的地球化学块体进行了划分,总结了地球化学块体在空间上的分布规律,通过研究地球化学块体内部结构,追踪大型至特大型矿床可能存在的地点。根据已知地区的矿产探明储量与地球化学块体的关系,计算了该地区成矿率,预测了区内铅锌矿资源潜力,同时指出在块体内还存在巨大的寻找铅锌矿产资源的潜力。  相似文献   

吡啶硫酮类防污剂对华美盘管虫早期不同发育阶段的毒性效应研究     

商群  陈新  王超超  葛天宇  曹瑞  朱秀琴  徐利婷  唐敏 《海洋科学》2015,39(9):33-38

以中国南海常见的多毛类——华美盘管虫(Hydroides elegans)作为受试生物,分别研究了吡啶硫酮铜和吡啶硫酮锌对早期不同发育阶段的华美盘管虫的急性毒理效应。发现暴露于吡啶硫酮铜的华美盘管虫精子和卵子的受精半数抑制浓度(IC50)分别为19.49μg/L和88.44μg/L,担轮幼虫24 h半数致死浓度(24h-LC50)和48 h半数致死浓度(48h-LC50)分别为7.35μg/L和5.00μg/L,后担轮幼虫24h-LC50和48h-LC50分别为8.57μg/L和5.87μg/L;暴露于吡啶硫酮锌的华美盘管虫精子和卵子的受精IC50分别为36.74μg/L和159.59μg/L,担轮幼虫24 h-LC50和48 h-LC50分别为8.57μg/L和6.67μg/L,后担轮幼虫24 h-LC50和48 h-LC50分别为12.03μg/L和8.07μg/L。表明华美盘管虫早期发育的不同阶段对吡啶硫酮铜和吡啶硫酮锌的敏感性表现出一定差异,与配子受精率和后担轮幼虫的毒性反应相比,担轮幼虫对吡啶硫酮铜和吡啶硫酮锌的毒性表现出较高的敏感性;而且,对吡啶硫酮铜的敏感性普遍高于吡啶硫酮锌。  相似文献   

新疆尼勒克县喀英迪地区铅锌矿地质特征及成因     

姚德刚  赵环金  贺业峰 《山东国土资源》2011,27(9)

喀英迪铅锌矿主要产于早石炭世阿克沙克组及其与晚奥陶世呼独克达坂组的接触带上。通过普查工作共圈定15个铅锌矿体。其中主要矿体4个,Ⅰ-4矿体处于晚奥陶世呼独克达坂组灰岩与早石炭世阿克沙克组的不整合接触面上及其两侧,工程控制总长度为523m,最大斜深100m。倾向70°～100°,倾角一般20°～50°,连续性较好。该矿体铅单工程厚0.86～5.64m,平均2.86m,厚度变化系数为70.57%;锌单工程厚0.80～5.64m,平均1.81m,厚度变化系数为93.97%,属于变化较稳定型矿体。铅单工程品位0.62%～16.47%,平均4.53%,品位变化系数114.34%;锌单工程品位0.53%～12.37%,平均3.78%,品位变化系数57.47%。属于有用组分分布较均匀型矿体。通过对矿床地质特征的研究,认为该矿床属沉积岩容矿的、层控的、构造控制非岩浆型低温热液矿床。  相似文献   

Geodynamic modelling of the Century deposit,Mt Isa Province,Queensland     

A. Ord  B. E. Hobbs  Y. Zhang  G. C. Broadbent  M. Brown  G. Willetts 《Australian Journal of Earth Sciences》2013,60(6):1011-1039

This paper is concerned with an example of quantitative modelling of orebody formation as a guide to reducing the risk for future mineral exploration. Specifically, the paper presents a detailed 3–D numerical model for the formation of the Century zinc deposit in northern Queensland. The model couples fluid flow with deformation, thermal transport and chemical reactions. The emphasis of the study is a systems approach where the holistic mineralising system is considered rather than concentrating solely on the mineral deposit. In so doing the complete plumbing system for mineralisation is considered with a view to specifying the critical conditions responsible for the ore deposit occurring where it does and having the size and metal grades that are observed. The numerical model is based on detailed geological, tectonic, isotopic and mineralogical data collected over the past 20 years. The conclusions are that the Century zinc deposit is located where it is because of the following factors: (i) a thermal anomaly is associated with the Termite Range Fault due to advection of heat from depth by fluid flow up the Termite Range Fault; (ii) bedding‐plane fissility in the shale rocks hosting the Century zinc deposit has controlled the wavelength and nature of D₁ folding in the vicinity of the deposit and has also controlled increases in permeability due to hydrofracture of the shales; such hydrofracture is also associated with the production of hydrocarbons as these shales passed through the ‘oil‐window’; (iii) Pb–Zn leached from crustal rocks in the stratigraphic column migrated up along faults normal to the Termite Range Fault driven by topographic relief associated with inversion at the end of the Isan Orogeny; these fluids mixed with H₂S derived at depth moving up the Termite Range Fault to mix with the crustal fluids to precipitate Pb–Zn in a plume downstream from the point of mixing. Critical factors to be used as exploration guides are high temperatures, carbonaceous fissile shales now folded into relatively tight D₁ folds, fault‐controlled plumbing systems that enable fluid mixing, depletion of metals upstream of the deposit and,in particular,a very wide Fe‐depletion halo upstream of the deposit.  相似文献