Peaks of People: Using Topographic Prominence as a Method for Determining the Ranked Significance of Population Centers     

Garrett Dash Nelson  Ryan McKeon 《The Professional geographer》2019,71(2):342-354

This article borrows a statistical method from physical geography—topographical prominence—to suggest a new technique for measuring the relative significance or rank of population centers. Unlike raw population measures, prominence gives consideration to both the spatial intensity of concentrated population areas as well as the spatial dependence or independence of neighboring settlement clusters in relation to one another. We explain how to apply the topographic prominence calculation method to gridded population data and examine its practical utility through case studies of several U.S. states. We then discuss some ways in which parametric choices about point-to-surface transformations can result in considerably different outcomes and offer further suggestions for conceptualizing and measuring population center significance.  相似文献   

北黄海海底麻坑群形态的定量研究及控制因素   总被引：1，自引：0，他引：1  

刘晓瑜  冯秀丽  陈义兰  唐秋华  刘乐军  路波  焦鹏飞 《海洋学报》2018,40(3):36-49

本文基于高分辨率多波束水深数据和反向散射强度数据，对北黄海海底麻坑群的形态参数进行定量研究，结合水深、地形坡度和后向散射强度的变化准确界定了麻坑的轮廓，识别出圆形、椭圆形、拉长型麻坑共282个，并在ArcGIS软件中对其形态参数进行了分析计算，麻坑的平均长轴1.36 km，短轴0.78 km，直径0.94 km，面积0.88 km2，平均周长3.82 km，长宽比1.83，深度0.3~2.5 m，平均面积密集度13%，麻坑的剖面形态有麻坑边缘凹陷、中部有明显凸起（W1型），麻坑边缘凹陷、中部略凸起（W2型），麻坑中部单纯凹陷（V型），分别集中分布在麻坑群的北部、南部、西部。麻坑的平面规模大、深度小的原因与地层中形成麻坑的游离气体浓度较小有关，也可能受到了地震、海啸等外力的诱发。麻坑的长轴优势走向为ENE-WSW、NNE-SSW，底流对其形状的塑造起了较大作用，部分麻坑成串排列，形成串珠状的麻坑链，其排列方式受到海底古河道、古潟湖等沉积地层结构的控制。海底麻坑群发育区反向散射强度为-60~-71 dB，麻坑内部较麻坑外部平均高5 dB，可能为麻坑内部气体泄漏引起海底沉积物被剥蚀后残留下的粗颗粒物质或海底生物活动留下的遗迹导致的。  相似文献   

基于数学形态学的位场数据边缘增强方法     

张建民  胡英飒  曾昭发  杜威  张领  槐楠  胡志鹏 《吉林大学学报(地球科学版)》2019,49(3):845-856

位场数据边缘增强对于地质构造研究和矿床勘查具有重要意义。现有的边缘增强方法多数基于位场数据的导数构建，往往存在对噪声敏感的缺点，且处理结果中常有虚假边界的出现。本文基于数学形态学良好的形状分析和噪声压制性能，通过数学形态学基本算子的组合叠加，提出了一种新的位场数据边缘增强方法。该方法容易实现，且不需要计算位场数据的水平和垂向导数。板状体模型试验结果表明，该方法能有效地对重力异常和化极后的磁异常数据进行边缘增强。针对三维模型试验中正负异常同时存在的情况，相比以往几种方法，该方法输出的边缘更清晰且没有额外边缘的产生，并表现出更强的抗噪能力。最后将该方法和以往几种方法应用到老挝万象地区实际重力异常数据的处理中，结果显示该方法刻画出的边缘更加连续清晰；同时结合以往地质资料，推断了成矿的有利部位。  相似文献   

基于形态学特征和DNA条形码对中国沿海银口天竺鲷属(Jaydia)分类研究     

罗植森  易木荣  刘思杓  邱康文  谷穗  颜云榕 《海洋与湖沼》2020,51(5):1246-1256

本研究针对中国沿海银口天竺鲷属鱼类分类鉴定不清晰，同种异名多，种类误鉴等分类问题，结合形态特征比较与DNA条形码技术对其分类鉴定问题进行梳理。2014—2019年间于南海北部沿海采集101尾银口天竺鲷属鱼类标本，经形态学特征鉴定为：横带银口天竺鲷Jaydia striata（Smith&Radcliffe，1912），特征为体侧有7—11褐色宽横带，腹鳍、臀鳍浅灰色；印度洋银口天竺鲷J.striatodes（Gon，1997），特征为体侧有7—11褐色宽横带，臀鳍后缘黑色；白边银口天竺鲷J.novaeguineae（Valenciennes，1832），特征为臀鳍、尾鳍最下缘为白边；黑边银口天竺鲷J.truncata（Bleeker，1855）特征为第二背鳍、臀鳍中部有一平行基底的黑色带，尾鳍后缘黑色带略宽；史密斯银口天竺鲷J.smithi Kotthaus，1970，特征为第二背鳍中部有一平行基底的黑色纵带，尾鳍后缘黑色带略细；斑鳍银口天竺鲷J.carinatus （Cuvier，1828），特征为第二背鳍最末软条基底有一大黑斑；黑鳃银口天竺鲷J.poeciloptera （Cuvier，1828），特征为臀鳍淡黄色，鳍膜间有一暗点。研究发现Apogon arafurae并不是J.truncata同种异名，学名应更正为Jaydia poeciloptera。基于线粒体COI基因K2P遗传距离显示，J.striata、J.smithi、J.truncata种内遗传距离大于2%。构建NJ系统发育树发现红海、阿拉伯海和北部湾的J.smithi分成2个单系支。结合NJ树分析发现，J.smithi和J.poeciloptera均出现错误鉴定，认为GenBank上传的序列（MH085808、JQ681491）存在误鉴，实为J.poeciloptera。  相似文献   

海洋脊椎动物甲状腺系统的研究与应用     

杨皓月  邢荣娥  刘松  于华华  李鹏程 《海洋科学》2020,44(8):118-129

甲状腺（Glandula thyreoidea）是海洋脊椎动物体内重要的内分泌腺，从海洋脊椎动物开始，才有了独立的甲状腺结构。海洋脊椎动物的甲状腺一般为实质性的组织。实质由甲状腺滤泡组成，构成滤泡的上皮细胞合成、贮存和分泌的甲状腺激素是调节机体生长发育的关键激素。从海洋脊椎动物开始才有了独立的甲状腺结构。对于动物甲状腺的研究多集中在甲状腺形态及甲状腺与生长发育关系方面，而对海洋脊椎动物的甲状腺的研究则越来越多的集中于环境因素所引起的甲状腺病变方面，环境因素对甲状腺功能的影响也逐渐成为科学研究的重点。海洋水体污染导致的甲状腺机能受损，使海洋脊椎动物不能正常生长发育，数目与种类骤减之时，我们不得不重视对海洋脊椎动物甲状腺的研究。  相似文献   

Morphological and sedimentary features of sandy-muddy transitional beaches in estuaries and bays along mesotidal to macrotidal coasts     

Shaohua Zhao  Hongshuai Qi  Feng Cai  Jun Zhu  Xiang Zhou  Gang Lei 《地球表面变化过程与地形》2020,45(7):1660-1676

Sandy-muddy transitional beaches (SMT-Beaches), representing the transition from sandy beaches to tidal mudflats, should theoretically develop very different morphological and sedimentological characteristics in river estuaries and in semi-enclosed bays due to their contrasting dynamic sedimentary environments. Evidence, however, is rare in the scientific literature. To reveal these morphological and sedimentary differences, the sand–mud transition (SMT) boundary distribution, beach profiles, and surface and downcore sediment grain-size compositions of 27 SMT-Beaches located along mesotidal to macrotidal coasts of the western Taiwan Strait, southeastern China, were investigated. The results show that typical estuarine SMT-Beaches are mainly characterized by an ambiguous SMT, a long distance between the SMT and the coastline (31–302 m), lower SMT and inflection point altitudes (average –0.76 m and –0.04 m), and lower upper beach gradients (~0.068) with fine sand. Estuarine SMT-Beach sediments display clear interbedded mud and sand layers, implying potential SMT migrations over various timescales. By contrast, typical bay SMT-Beaches are characterized by distinct SMT, a short distance between the SMT and the coastline (11–52 m), higher SMT and inflection point altitudes (~0.24 m and ~0.35 m), and narrower upper beaches with higher gradients (~0.095) and coarse sand. Bay SMT-Beaches present relatively stable sedimentary sequences and a narrow gravel belt surrounding the inflection point and/or SMT. These morphological and sedimentary differences between the two SMT-Beach types are initially constrained by sediment supply and transport and are further affected by tide conditions and wave climate. Sediment supply and transport predominately control the sediment structures, while the tidal range strongly influences spatial variations in SMT distances. Wave climate normally drives SMT altitude variations. This study highlights the morphological and sedimentary differences in SMT-Beaches in estuaries and bays, providing important knowledge for further revealing their morphodynamic processes and potential future nourishment. © 2020 John Wiley & Sons, Ltd.  相似文献   

On the morphology of radial sand ridges     

Weina Zhang  Xiaohe Zhang  Huiming Huang  Yigang Wang  Sergio Fagherazzi 《地球表面变化过程与地形》2020,45(11):2613-2630

We use a hydrodynamic model applied to an idealized fan-shaped basin to explore the morphology and dynamics of radial sand ridges in a convergent coastal system. A positive morphological feedback between channel incision and flow redistribution is responsible for the formation of the channel-ridge pattern. The selection mechanism of bottom wavelength is associated with flow concentration in the deeper part of the channels. Our results are compared to sediment and hydraulic dynamics in the radial sand ridges (RSRs) in China. In a convergent, sloping basin the tangentially averaged tidal velocity peaks at 47 km from the apex. This distance is similar to the arc distance, 62 km, where the RSRs are most incised. An offshore shift in tidal phase results in stronger flows near the north coastline, explaining the presence of asymmetric channel patterns. A numerical stability analysis indicates that small radial oscillations with a wavelength of 10° to 15° maximize the velocity in the troughs. This oscillation wavelength also emerges in the RSRs, which display a peak in spectral energy at a radial wavelength between 25° to 37.5°. High-resolution numerical simulations in the RSRs confirm that flow concentration occurs in the deeper part of the channels, keeping them flushed. We therefore conclude that the RSRs display morphometric characteristics similar to other tidal incisions, like tidal inlets and intertidal channels. This result further supports the dominant role of tidal prism and related peak velocities in incising coastal landscapes. © 2020 John Wiley & Sons, Ltd.  相似文献   

The influence of channel morphology on bedload path lengths: Insights from a survival process model     

Conor McDowell  Marwan A. Hassan 《地球表面变化过程与地形》2020,45(12):2982-2997

Tracer studies are a commonly used tool to develop and test Einstein-type stochastic bedload transport models. The movements of these tracers are controlled by many factors including grain characteristics, hydrologic forcing, and channel morphology. Although the influence of these sediment storage zones related to morphological features (e.g., bars, pools, riffles) have long been observed to “trap” bedload particles in transport, this influence has not been adequately quantified. In this paper we explore the influence of channel morphology on particle travel distances through the development of a Bayesian survival process model. This model simulates particle path length distributions using a location-specific “trapping probability” parameter (p_i ), which is estimated using the starting and ending locations of bedload tracers. We test this model using a field tracer study from Halfmoon Creek, Colorado. We find that (1) the model is able to adequately recreate the observed multi-modal path length distributions, (2) particles tend to accumulate in trapping zones, especially during large floods, and (3) particles entrained near a trapping zone will travel a shorter distance than one that is further away. Particle starting positions can affect path lengths by as much as a factor of two, which we confirm by modelling “starting-location-specific” path length probability distributions. This study highlights the importance of considering both tracer locations and channel topography in examinations of field tracer studies. © 2020 John Wiley & Sons, Ltd.  相似文献   

遥感影像线状地物智能化提取算法研究     

张金梅 《测绘与空间地理信息》2020,(2):169-171

对遥感影像线状地物的提取进行了深入研究分析,分别采用Snakes模型、二值形态学和面向对象处理等3种算法智能化提取线状地物。通过实验验证,3种智能算法都是行之有效的,且Snakes模型在各种线状地物提取上表现稳定,而二值形态学和面向对象算法在部分线状地物提取上表现较为突出,整体稳定性却不如Snakes模型。  相似文献   

基于3D雕刻技术的岩体结构面剪切各向异性研究     

周辉  程广坦  朱勇  张春生  卢景景  张传庆  章颖辉 《岩土力学》2019,40(1):118-126

相同形貌结构面重复性剪切试验和各向异性剪切试验一直是岩体结构面剪切力学特性试验研究中的难点，而该问题对于工程岩体的开挖力学响应和稳定性分析、评价与控制至关重要，问题的关键在于同一种岩石的结构面形貌的再现。为此，基于3D扫描和3D雕刻技术，重复制备了3种不同粗糙度的大理岩结构面试样，开展了不同法向应力下相同形貌结构面的各向异性剪切试验。试验结果发现：（1）同一法向应力、不同剪切方向下，相同形貌结构面的剪切强度、剪胀和剪切破坏特征均呈现明显各向异性；（2）结构面粗糙度各向异性很大程度上决定了剪切强度的各向异性，两者具有较好的正相关性；（3）随着法向应力的升高，结构面剪切特征的各向异性有逐渐弱化的趋势。同时，研究还充分表明，3D雕刻技术是系统开展结构面剪切力学特征各向异性研究的可靠手段，可在将来研究中发挥更为重要的作用。  相似文献