Microbial release of potassium from K-bearing minerals by thermophilic fungus Aspergillus fumigatus     

Bin Lian  Bin Wang  Mu Pan  H. Henry Teng 《Geochimica et cosmochimica acta》2008,72(1):87-98

A strain of thermophilic fungus Aspergillus fumigatus was cultured with K-bearing minerals to determine if microbe-mineral interactions enhance the release of mineralic potassium. Experiments were carried out in two settings, one with the mineral grains and the fungal cells in direct contact, and the other employing a membrane (pore size 0.22 μm) to separate the two. Measurements over a period of 30 days showed that, irrespective of the experimental setup, the concentration of free K in the culture was drastically higher than those in any of the control experiments where no living organism was present. Moreover, the occurrence of mineral-cell physical contact enhanced potassium release by an additional factor of 3 to 4 in comparison to the separation experiments. For contact experiments, Electron Probe Microanalysis revealed the formation of mycelium-mineral aggregates, and Atomic Force Microscopy imaging further indicated the possible ingestion of mineral particles by the fungus cells. Contrasting to what was observed and expected in control experiments, the potassium solubilization rate showed a positive dependence upon pH when fungi and minerals were mixed directly, and exhibited no correlations with solution acidity if cell-rock contact was restrained. These results appear to suggest that A. fumigatus promoted potassium release by means of at least three likely routes, one through the complexation of soluble organic ligands, another appealing to the immobile biopolymers such as the insoluble components of secretion, and the third related to the mechanical forces in association with the direct physical contact between cells and mineral particles.  相似文献   

Usefulness of geological,mineralogical, chemical and chemometric analytical techniques in exploitation and profitability studies of iron mines and their associated elements     

M. Dolores Petit-Dominguez  M. Isabel Rucandio  Almudena Galan-Saulnier  Rosario Garcia-Gimenez 《Journal of Geochemical Exploration》2008

Due to the high number of variables involved in mine profitability studies, it is often very difficult to establish connections among them in order to provide a blend of market saleable quality products. In this sense, analytical chemistry together with chemometry are essential and indispensable disciplines to tackle these studies. The aim of this work was to demonstrate the utility of these disciplines to carry out optimization studies of iron mines. For this purpose, one of the most important iron mines of the Iberian Peninsula was chosen, sited in the mountain range of Sierra Menera, near the location of Ojos Negros (Teruel, Spain). Geological, mineralogical and chemical composition of 148 samples was analyzed, corresponding to different depths of three drill holes (named TE1, TE2 and TE3). In particular, aspects concerning to chemical composition are very important, since the mean contents of certain elements, such as phosphorus, sodium and potassium, should be restricted to the established limits to prevent that companies can drive back the raw material if they do not fulfil the necessary requirements. On the other hand, the large number of analysed samples drove us to use a statistical processing of the data. Among other aspects, it provides a way to find possible connections among a high number of variables and classify samples into compositional groups sharing similar composition, in order to limit the mineralised area and to obtain enough information about the amount of those chemical elements associated to iron ores. Data obtained from all these analytical techniques were in good agreement and provide a methodology that can be of wide interest applied to different geological studies.  相似文献   

水中总氮的紫外分光光度分析法     

刘新 《海洋湖沼通报》1993,(3):60-66

本文采取K_2 S_2O_8氧化法,研究了氧化条件、紫外分光光度法测定总氮的最佳条件以及可能产生的干扰及消除方法。利用本法测定天然水中总氮回收率100±2％,检出限为0.010mg·dm~(-3)。方法快速准确,与Kjedahl法相比可提高工效27倍。  相似文献   

Chemistry of marine resources-ⅩⅨ. The molecule design and synthesis of crow-link type alkyd resin and its enrichment behaviour for potassium ion in sea water     

Sun Yushan  Feng Fei  Sun Hanzhang  Peng Qiqiang  Xia Zongfeng  Wang Wei 《海洋学报(英文版)》1994,13(3):377-388

This paper first presents the molecule design and synthesis of crown-link type alkyd resin,and its enrichment behaviour for potassium ion in low concentration solution and sea water.On the basis of some theory concepts of Host-Guest chemistry developed in recent years,we have designed and synthesized a new polymer enrichment agent of crow-link resin for potassiumion,i.e.,polymacrocyclic ether bislactone of diethylene glycolpyromyllitic acid(briefly called crown-link type alkyd resin or PBL resin).The yield was about 97.4%,almost quantitatively.  相似文献   

A2O·3MoO3·3H2O(A＝Na、K)晶须的合成与表征          下载免费PDF全文

岳涛  朱黎霞  高世扬  夏树屏 《盐湖研究》2003,11(1):41-44

在常温条件下合成了两种钾、钠的钼酸盐晶须 ,用FT -IR和XRD对其结构进行了分析 ,SEM照片清晰表明这两种化合物为针状晶须。  相似文献   

KCl-KNO3-CH3OH/H2O和KNO3-NH4NO3-CH3OH/H2O三元体系在25℃时的溶解度          下载免费PDF全文

刘亦凡  谢爱华  钟杰  董殿权 《盐湖研究》2003,11(1):66-69

测定了 2 5℃时KCl KNO3 CH3 OH H2 O和KNO3 NH4NO3 CH3 OH H2 O三元体系的溶解度 ,并与 2 5℃时相应体系在水中的溶解度进行了比较。  相似文献   

温和水热法制备MZr2(PO4)3(M=Na,K,Rb)   总被引：2，自引：0，他引：2       下载免费PDF全文

王海增  徐华伟  庞文琴 《盐湖研究》2003,11(3):31-35

在温和的水热条件下分别制备出纯净的磷酸锆钠 [NaZr2 (PO4) 3 ]、磷酸锆钾 [KZr2 (PO4) 3 ]和磷酸锆铷 [RbZr2 (PO4) 3 ]。研究了原料配比、矿化剂 (氟离子 )、反应时间和温度等水热晶化条件对产物生成的影响。发现在较宽的温和水热条件下可以制得这三种磷酸锆盐 ;随着碱金属离子的增大 ,产物的生成条件越来越窄 ;最佳制备条件是 :F- ZrO2 =2、P2 O5 ZrO2 =3 (均为摩尔比 )、[ZrOCl2 ]=0 6mol L、反应温度 1 5 0℃、反应时间 2天。用水热法没有制备出同一系列磷酸锆盐中的磷酸锆锂 [LiZr2 (PO4) 3 ]和磷酸锆铯 [CsZr2 (PO4) 3 ]。采用XRD、SEM、IR、Raman和XPS等现代物化仪器对产物的结构与物相纯度进行了测定与表征  相似文献   

呵叻盆地钾镁盐矿沉积特征及成因探讨   总被引：11，自引：1，他引：11  

钟维敷  李志伟  单卫国 《云南地质》2003,22(2):142-151

充分收集已有地质成果基础上，分析呵叻盆地沉积特征和成钾条件。详细论述呵叻盆地钾盐矿的赋存条件和产出特征，初步探讨钾盐矿的形成机理。  相似文献   

Laser Ablation ICP-MS Analysis of Geological Materials Prepared as Lithium Borate Glasses   总被引：9，自引：0，他引：9  

Stephen M. Eggins 《Geostandards and Geoanalytical Research》2003,27(2):147-162

A simple, rapid and precise method is described for determining trace elements by laser ablation (LA)-ICP-MS analysis in bulk geological materials that have been prepared as lithium borate glasses following standard procedures for XRF analysis. This approach reliably achieves complete sample digestion and provides for complementary XRF and LA-ICP-MS analysis of a full suite of major and trace elements from a single sample preparation. Highly precise analysis is enabled by rastering an ArF excimer laser (λ= 193nm) across fused samples to deliver a constant sample yield to the mass spectrometer without inter-element fractionation effects during each analysis. Capabilities of the method are demonstrated by determination of twenty five trace elements (Sc, Ti, V, Ga, Rb, Sr, Y, Zr, Nb, Cs, Ba, REE, Hf, Ta, Pb, Th and U) in a diverse range of geological reference materials that includes peridotites, basalts, granites, metamorphic rocks and sediments. More than 90% of determinations are indistinguishable from published reference values at the 95% confidence level. Systematic bias greater than 5% is observed for only a handful of elements (Zr, Nb and U) and may be attributed in part to inaccurate calibration values used for the NIST SRM 612 glass in the case of Zr and Nb. Detection limits for several elements, most notably La, are compromised at ultra-trace levels by impurities in the lithium borate flux but can be corrected for by subtracting appropriate procedural blanks. Reliable Pb analysis has proved problematic due to variable degrees of contamination introduced during sample polishing prior to analysis and from Pt-crucibles previously used to fuse Pb-rich samples. Scope exists for extending the method to include internal standard element/isotope spiking, particularly where integrated XRF analysis is not available to characterise major and trace elements in the fused lithium borate glasses prior to LA-ICP-MS analysis.  相似文献   

利用不纯净十水芒硝与纯净氯化钾制取硫酸钾的研究   总被引：1，自引：0，他引：1       下载免费PDF全文

张树群  牛自得 《盐湖研究》1997,5(2):30-35

本文通过相图分析，对利用不纯净十水芒硝与纯净氯化钾通过二步转化制取硫酸钾进行了物料配比计算．给出了最佳物料配比及十水芒硝中氯离子的最大含量，对实际生产有指导意义。  相似文献