基于时相变化的晴空条件下Himawari-8 AHI火点检测     

鄢俊洁  瞿建华  冉茂农  张芳芳 《遥感学报》2020,24(5):571-577

Himawari-8静止气象卫星具有高空间分辨率、高观测频次和高时效特点,对于火点检测具有很强优势。对Himawari-8卫星的3.9μm和11.2μm两通道亮温进行了连续时相变化研究,得出两通道的亮温在时间上的变化差值稳定且规律明显。根据两通道的亮温时相特征,考虑白天可见光对3.9μm通道的影响,并结合火点产生时引起的亮温变化特征,提出了适用于晴空条件下改进的火点检测算法。在多处进行了此算法的实验,例如2018-11-27 T 16:40(UTC时)河北张家口市桥东区一化工厂附近发生的严重爆炸起火事件以及2019-02-28澳大利亚西南部发生的火灾事件,均快速有效的检测到了火点。实验表明,改进的火点检测算法能很好的进行火点检测,并能解决晨昏交界、冰雪下垫面、常规火源点、太阳耀光等火点检测的难题。  相似文献   

Low‐P and high‐T metamorphism of basalts: Insights from the Sudbury impact melt sheet aureole and thermodynamic modelling     

Taus R. C. Jrgensen  Douglas K. Tinkham  C. Michael Lesher 《Journal of Metamorphic Geology》2019,37(2):271-313

Low‐pressure and high‐temperature (LP–HT) metamorphism of basaltic rocks, which occurs globally and throughout geological time, is rarely constrained by forward phase equilibrium modelling, yet such calculations provide valuable supplementary thermometric information and constraints on anatexis that are not possible to obtain from conventional thermometry. Metabasalts along the southern margin of the Sudbury Igneous Complex (SIC) record evidence of high‐grade contact metamorphism involving partial melting and melt segregation. Peak metamorphic temperatures reached at least ~925°C at ~1–3 kbar near the SIC contact. Preservation of the peak mineral assemblage indicates that most of the generated melt escaped from these rocks leaving a residuum characterized by a plagioclase–orthopyroxene–clinopyroxene–ilmenite‐magnetite±melt assemblage. Peak temperatures reached ~875°C up to 500 m from the SIC lower contact, which marks the transition to metabasalts that only experienced incipient partial melting without melt loss. Metabasalts ~500 to 750 m from the SIC contact are characterized by a similar two‐pyroxene mineral assemblage, but typically contain abundant hornblende that overgrew clino‐ and orthopyroxene along an isobaric cooling path. Metabasalts ~750 to 1,000 m from the SIC contact are characterized by a hornblende–plagioclase–quartz–ilmenite assemblage indicating temperatures up to ~680°C. Mass balance and phase equilibria calculations indicate that anatexis resulted in 10–20% melt generation in the inner ~500 m of the aureole, with even higher degrees of melting towards the contact. Comparison of multiple models, experiments, and natural samples indicates that modelling in the Na₂O–CaO–FeO–MgO–Al₂O₃–SiO₂–H₂O–TiO₂–O₂ (NCFMASHTO) system results in the most reliable predictions for the temperature of the solidus. Incorporation of K₂O in the most recent amphibole solution model now successfully predicts dehydration melting by the coexistence of high‐Ca amphibole and silicate melt at relatively low pressures (~1.5 kbar). However, inclusion of K₂O as a system component results in prediction of the solidus at too low a temperature. Although there are discrepancies between modelling predictions and experimental results, this study demonstrates that the pseudosection approach to mafic rocks is an invaluable tool to constrain metamorphic processes at LP–HT conditions.  相似文献   

High-P granulites of the Songshugou area (Qinling Orogen,east-central China): Petrography,phase relations,and U/Pb zircon geochronology     

Thomas Bader  Lifei Zhang  Xiaowei Li  Bin Xia  Leander Franz  Christian de Capitani  Qingyun Li 《Journal of Metamorphic Geology》2020,38(4):421-450

High-pressure (HP) granulites provide telling records of mineral reactions at upper mantle to lower crustal levels and key information on the fate of material in subduction systems. The latter especially applies when they abut eclogite and mantle dunite because such rock associations are crucial for understanding the incompletely known processes at the interface of converging plates. A continental arc, active c. 520–395 Ma ago, formed an enigmatic example of such a rock association in the Songshugou area, Qinling Orogen. To unravel the juxtaposition of the distinct rocks, this study combines petrography, phase equilibria modelling, conventional thermobarometry, and zircon U–Th–Pb–Ti–REE analysis. Two mafic HP granulites, which contain the mineral assemblages garnet–clinopyroxene–plagioclase–rutile–mesoperthite–quartz and garnet–clinopyroxene–plagioclase–rutile, experienced peak metamorphic conditions of ≤1.4 GPa, 860°C and ~1.3 GPa, ≥910°C, respectively. During decompression and cooling, at 489 ± 4 Ma, amphibole lamellae unmixed from a clinopyroxene solid solution and orthopyroxene in part replaced garnet. A felsic HP granulite shows equilibration of garnet, perthite, antiperthite, kyanite, quartz, and rutile at 810–860°C, ~1.2 GPa, sillimanite growth during decompression, and upper amphibolite facies cooling at 510 ± 4 Ma. Though the thermobarometric data are just within the methodological errors, the U/Pb zircon ages imply the HP granulites did not evolve coherently. The HP granulites either represent foundered lower arc crust or originated from subduction erosion because their geochemistry is indistinguishable from that of the hanging-wall plate. Published and new pressure–temperature–time–deformation paths converge at ~710°C, ~0.9 GPa, and ≲470 Ma, implying exhumation tectonics juxtaposed the HP granulites with a mélange of eclogite and mantle dunite at lower crustal levels. This study highlights that lower arc crust can comprise material of diverse evolution.  相似文献   

固体潮位移InSAR相位模拟及对广域地表形变监测的影响初探   总被引：1，自引：0，他引：1       下载免费PDF全文

李德伟  江利明  蒋厚军  董景龙  汪汉胜 《地球物理学报》2019,62(12):4527-4539

固体地球潮汐(Solid earth tide,SET)在地表产生的径向位移可达40～50 cm,形变梯度可达2 cm/100 km,是各种精密大地测量和地球物理观测必须考虑的因素之一.随着星载合成孔径雷达干涉测量(Interferometric synthetic aperture radar,InSAR)地表形变监测范围的不断增大以及对精度要求不断提高,固体潮位移对InSAR观测的影响不容忽视.本文利用固体潮位移理论模型,根据InSAR测量基本原理和Sentinel-1卫星成像参数,模拟了固体潮位移InSAR相位,定量分析了其时空分布特征,并以我国江汉平原和北美大平原的Sentinel-1数据为例,探讨了固体潮位移InSAR相位对广域地表形变监测的影响.结果表明:(1)固体潮位移对InSAR广域地表形变监测存在较大影响,在250 km×250 km范围中,以C波段为例,其相位变化可达12 rad(对应52 mm视线向形变);(2)固体潮位移相位在中低纬度(60°S—60°N)地区变化较大,两极地区较小,且在时间上具有明显的周期性;(3)在Sentinel-1 InSAR观测中,通过固体潮位移相位改正去除了干涉图中的部分低频相位偏差,相比原始干涉图,改正后的解缠相位标准差减小了约29%.本研究对于认识固体潮位移InSAR相位的时空分布特征以及提高星载InSAR广域地表形变监测的准确度与可靠性均具有重要意义.  相似文献   

Dynamic characteristics of marine soft clay under variable phase difference and initial static shear stress     

Wenqian Dong  Xiuqing Hu  Hongtao Fu 《Marine Georesources & Geotechnology》2020,38(7):770-785

Abstract

Under seismic loading, the soil layer is subjected to multidirectional cyclic shear stress with different amplitudes and frequencies because of the coupling of multiple shear waves and the soil element within a slope or behind a retaining wall is subjected to initial static shear stress before subjected to cyclic loading. Due to the complexity of seismic loading propagation, a phase difference exists between the initial static shear stress and cyclic shear stress. To investigate the influence of the phase difference and initial static shear stress on cyclic shear strain, cyclic modulus, and cyclic strength, a series of laboratory tests are performed on Wenzhou marine soft clay by multi-directional simple shear system, which can simulate the actual state better by controlling the horizontal cyclic stress in the x and y directions simultaneously. As the phase difference varies from 0° to 90°, the dynamic shear modulus increases and cyclic strain accumulation decreases with an increasing number of cycles. The shear strain increases with the initial shear stress.  相似文献   

2016与1998年春季北大西洋海表温度异常的差异及成因     

薛文璟  余锦华  陈林 《热带海洋学报》2020,39(3):19-30

利用再分析资料以及混合层海温诊断方程, 研究1997—1998与2015—2016年超级厄尔尼诺次年北大西洋海表温度异常(sea surface temperature anomalies, SSTA)的差异及成因。结果显示, 北大西洋SSTA在1998年春季呈明显正负正三极型式分布, 而在2016年呈弱的负正负型态。诊断热带北大西洋SSTA的影响因素表明, 1998年春季暖SSTA除了之前研究强调的海洋表面向大气的潜热输送异常减少, 以及吸收太阳辐射的增加外, 海洋动力过程即Ekman纬向漂流也起着重要的作用。热力过程与厄尔尼诺峰值后出现的北大西洋涛动(North Atlantic Oscillation, NAO)负位相有关, 其可引起亚速尔高压减弱, 产生西南风异常, 通过风-蒸发-海表温度(sea surface temperature, SST)反馈机制使热带北大西洋蒸发减弱, 海表增暖, 沃克环流下沉支的东移对这一增暖也有贡献。与1997—1998厄尔尼诺事件不同, 2015—2016厄尔尼诺事件没有强迫出负位相NAO, 而是出现弱NAO正位相, 热带北大西洋为弱的东风异常, 使海表发生一定的冷却, 形成2016春季北大西洋SSTA与1998年的明显差异。  相似文献   

基于PSR-WSVM模型的边坡位移预测     

李建新  刘小生  肖钢  周文  刘仁志 《大地测量与地球动力学》2020,40(6):577-580

为建立高精度的边坡位移预测模型，采用相空间重构（PSR）将边坡位移时间序列数据转换为多维数据，同时构造小波核函数改进的支持向量机模型，建立PSR-WSVM模型并应用于边坡位移预测。将PSR-WSVM模型预测结果与传统支持向量机（SVM）模型、小波支持向量机（WSVM）模型和基于相空间重构的支持向量机（PSR-SVM）模型预测结果进行对比，通过平均绝对误差（MAE）、平均绝对误差百分比（MAPE）和均方根误差（RMSE）3个精度评价指标验证PSR-WSVM模型的可行性。工程实例结果表明，PSR-WSVM模型预测结果的3个精度评价指标都优于另外3种模型，边坡位移预测的精度明显提升。  相似文献   

Structure of residual oil as a function of wettability using pore-network modelling     

《Advances in water resources》2014

In the water flooding of mixed-wet porous media, oil may drain down to relatively low residual oil saturations (S_or). Various studies have indicated that such low saturations can only be reached when oil layers in pore corners are included in the pore-scale modelling. These processes within a macroscopic porous medium can be modelled at the pore-scale by incorporating the fundamental physics of capillary dominated displacement within idealised pore network models. Recently, the authors have developed thermodynamic criteria for oil layer existence in pores with non-uniform wettability which takes as input geometrically and topologically representative networks, to calculate realistic S_or values for mixed-wet and oil-wet sandstones [16, 21]. This previous work is developed in this paper to include (i) the visualisation of the 3D structure of this residual oil, and (ii) a statistical analysis of this “residual/remaining” oil. Both the visualisation and the statistical analysis are done under a wide range of wettability conditions, which is reported for the first time in this paper.The structure of residual oil for strongly water wet systems is well known (where residual = remaining oil) and our model agrees with this but this structure changes radically for mixed wet systems (where residual ≠ remaining) and this has not yet been visualised experimentally. We find that for more water-wet systems high final residual oil saturations are reached at relatively small amounts of water injected and this oil is present in the pores as bulk oil. On the other hand, for more oil-wet systems we find a slow decrease of the amount of remaining oil with increasing amounts of injected water. During the process, the remaining connectivity of the oil phase is increasingly provided by oil layers only, hence the slow drainage. The final residual oil saturation, only reached in the theoretical limit of an infinite amount of injected water, is almost entirely contained in large number of (relatively low volume) oil layers, which are present in pores of most radius sizes.  相似文献   

青藏高原东北缘瑞利面波成像：射线理论与程函方程结果的比较     

郝识杰  黄周传  王良书  徐鸣洁  米宁  于大勇 《高校地质学报》2020,26(6):712-720

青藏高原东北缘是青藏高原隆升的前缘地带，其构造变形特征一直是研究的热点。前人在该区域进行过面波成像研究，但不同结果存在较明显的差异，可能与不同成像方法的分辨率有关，此次研究分别使用基于射线的方法和基于程函方程的方法进行了瑞利波相速度成像。笔者对比了20 s、30 s和60 s的成像结果，两种方法的结果表现出相似的速度特征。总体的速度特征与研究区域的主要构造单元分布相吻合，青藏高原东北缘表现出低速异常，鄂尔多斯块体表现出高速异常。在银川河套地堑，基于程函方程的成像在20 s和30 s得到更明显的低速异常，低速异常体的分布与地堑的轮廓吻合更好，说明基于程函方程的方法对数据利用更充分。  相似文献   

Extraction of Lithium from Salt Lake Brine using N523-TBP Mixture System   总被引：1，自引：1，他引：0       下载免费PDF全文

SHI Dong  LI Li-juan  LI Jin-feng  JI Lian-min  SONG Fu-gen  PENG Xiao-wu  ZHANG Li-cheng  ZHANG Yu-ze  LI Hui-fang  SONG Xue-xue  NIE Feng  ZENG Zhong-min  LIU Zhi-qi  GUO Fan 《盐湖研究》2019,27(2):95-110

In this work,problems encountered by tri-butyl phosphate( TBP) in the industrialization of lithium extraction from salt lake brine were discussed in detail. The behavior of N,N-bi-( 2-ethylhexyl) acetamide( N523) during lithium extraction was investigated,and its disadvantages were analyzed in the view of practical application. An N523-TBP mixture extraction system was proposed to alleviate or avoid the defects that N523 and TBP met when they were used separately. The optimal composition of this mixture extraction system was determined to be 20% N523-30% TBP-50% kerosene.The effects of brine acidity,Fe/Li molarity ratio,phase ratio and chloride ion concentration on lithium extraction efficiency were discussed. The operation conditions in single-stage extraction were optimized as brine acidity = 0. 05 mol/L,Fe/Li molarity ratio = 1. 3,and phase ratio = 2. The high concentration of chloride ions in brine was beneficial for the extraction of lithium. The structure of the extracted complex was proposed as( LiFeCl_4·n N523·m TBP)·( 2-n) N523·( 2-m) TBP( m + n = 2) by chemical analysis and slope-fitting methods. The extraction thermodynamic functions were calculated preliminarily,and the results suggested that the extraction process was an exothermic( ΔH 0) and spontaneous( ΔG 0) reaction,and the degree of disorder increased( ΔS 0) during the extraction process. This work will give some guidance to the lithium industry of Qinghai in both the fundamental theory and practical application.  相似文献