三维建模技术在金刚石勘查中的应用——以辽宁省瓦房店地区为例     

付海涛 《地质通报》2019,38(1):51-55

金刚石矿是辽宁省的重要矿产之一,辽宁瓦房店地区已探明的原生金刚石矿资源/储量占中国金刚石资源量的一半以上。通过开展三维建模工作,对该区金伯利岩管的形态、深部找矿方向等提出了一些新的认识。研究认为,三维模型可以更好地展示金伯利岩型金刚石矿体的空间展布形态,并可为勘查工作提出指导性意见。  相似文献   

Response to the paper by H. Zia,B. Lecampion “Explicit versus implicit front advancing schemes for the simulation of hydraulic fracture growth” (Int. J. Numer. Anal. Methods Geomech., 2019, 43 (6), 1300–1315)     

Aleksandr Linkov 《国际地质力学数值与分析法杂志》2020,44(16):2254-2259

The response presents three comments, which (i) explain theoretical background for the success of the explicit front advancing scheme by Zia and Lecampion (comment 1), (ii) suggest possible extensions (comment 2), and (iii) pay attention on expected limitations of the scheme to be checked by the authors in numerical experiments (comment 3). The response does not intend to present novel results: it is entirely based on known results published in the references cited.  相似文献   

山东大尹格庄金矿床深部三维定量成矿预测     

陈进  毛先成  邓浩 《地球学报》2020,41(2):179-191

大尹格庄金矿是胶西北招平断裂带中段的大型金矿床,但随着逐渐的开采其保有资源量不断下降,急需在矿床的深边部区域开展接续资源找矿工作。本文以大尹格庄金矿为研究对象,以区域成矿理论和找矿勘查模型为指导,利用三维地质建模技术构建了相关地质体的三维模型,在此基础上,采用定量化的方法提取地质体与成矿相关的控矿因素指标和矿化指标,并建立了三维定量成矿预测模型,并应用该模型圈定了3个找矿靶区。研究表明,该方法能够适用于大中型矿山的深边部找矿工作,其三维及定量化的预测结果能够为后续的勘探及开采工作提供重要参考。  相似文献   

成矿预测:从二维到三维   总被引：1，自引：0，他引：1  

袁峰  张明明  李晓晖  葛粲  陆三明  李建设  周宇章  兰学毅 《岩石学报》2019,35(12):3863-3874

随着矿产资源勘探方法以及计算机科学技术的不断发展,成矿预测的理论和方法已从定性发展至定量,从二维拓展到三维。近十年来,随着深部矿产资源勘探工作的推进,三维成矿预测研究得到了迅猛发展,相关理论与方法也已逐步走向成熟。本文总结了国内外二维成矿预测研究的现状,同时对近十年来国内外学者在三维地质建模技术、三维成矿预测方法等方面的主要成果和进展做了系统总结和分析。目前,国内外多个地区已相继开展了三维成矿预测工作,并成功圈定多个深部找矿靶区,相关成果为深部找矿勘探工作提供了新的方法和方向。在此基础上,本文对未来三维成矿预测的发展趋势进行展望,相较于传统的二维成矿预测,三维成矿预测往往受限于三维预测信息的缺乏。如何更好的挖掘二维数据在深度方向的指示能力,将二维数据推演至三维环境,利用数值模拟、机器学习等方法开展数据挖掘、充分发挥已有数据的内蕴信息将在未来推动三维成矿预测理论的深入发展,提高三维成矿预测的理论方法及应用实践水平。  相似文献   

Integration schemes with substepping algorithms for creep analysis in geomaterials     

Roberto Quevedo  Pedro Firme  Deane Roehl 《国际地质力学数值与分析法杂志》2019,43(7):1467-1487

This paper describes a robust and efficient methodology for predicting displacements, deformations, and stresses in geomaterials that are susceptible to creep. The methodology is based on two integration schemes, which consider substepping algorithms. The first scheme is used for integrating space-time relations in a global sense, whereas the second scheme is used for integrating stress-stain relations in a local sense. Different from previous studies, both integration schemes are easy to implement and general in the sense that they can be applied to any type of creep law. Through an in-house finite element simulator, several numerical tests are performed. They include triaxial and wellbore closure analyses considering soft soils and salt rocks. The results show that the combination of both schemes leads to stable and accurate solutions with reduced computational time.  相似文献   

辽宁查马屯铁矿三维地质建模及深部预测     

白银增  赵涌涛  王泽蛟  刘幸  李超 《地质与资源》2019,28(4):321-325

查马屯铁矿是一处隐伏于中生代火山沉积岩之下的沉积变质型铁矿床，矿体规模大、埋藏浅，深部资源潜力巨大.利用三维地质体建模软件Creatar，通过收集钻孔数据，建立地质数据库，生成三维钻孔.通过剖面定义、单工程矿体圈定、剖面编辑、曲面连接，建立矿体三维模型.依据"点-线-面-体"的思路，建立了辽宁查马屯铁矿三维地质模型.模型显示，查马屯铁矿体西南段向北西倾斜，北东部向南东倾斜，呈北东东向展布，应沿该方向部署找矿.矿体与磁异常复合关系表明，2号矿体南部存在巨大找矿空间，查马屯村南部及北东部是下一步找矿勘探的重点方向.  相似文献   

Recent increase of river–floodplain suspended sediment exchange in a reach of the lower Amazon River          下载免费PDF全文

Conrado M. Rudorff  Thomas Dunne  John M. Melack 《地球表面变化过程与地形》2018,43(1):322-332

We analyzed variation of channel–floodplain suspended sediment exchange along a 140 km reach of the lower Amazon River for two decades (1995–2014). Daily sediment fluxes were determined by combining measured and estimated surface sediment concentrations with river–floodplain water exchanges computed with a two‐dimensional hydraulic model. The average annual inflow to the floodplain was 4088 ± 2017 Gg yr^?1 and the outflow was 2251 ± 471 Gg yr^?1, respectively. Prediction of average sediment accretion rate was twice the estimate from a previous study of this same reach and more than an order of magnitude lower than an estimate from an earlier regional scale study. The amount of water routed through the floodplain, which is sensitive to levee topography and increases exponentially with river discharge, was the main factor controlling the variation in total annual sediment inflow. Besides floodplain routing, the total annual sediment export depended on the increase in sediment concentration in lakes during floodplain drainage. The recent increasing amplitude of the Amazon River annual flood over two decades has caused a substantial shift in water and sediment river–floodplain exchanges. In the second decade (2005–2014), as the frequency of extreme floods increased, annual sediment inflow increased by 81% and net storage increased by 317% in relation to the previous decade (1995–2004). Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

海洋效应对中国沿海地磁观测影响——以广州台站为例   总被引：2，自引：1，他引：1       下载免费PDF全文

李建平  翁爱华  李世文  杨悦  唐裕  张艳辉 《地球物理学报》2018,61(2):649-658

以广州台站为例，研究海洋效应对中国沿海地磁观测C-响应的影响.海洋效应的三维正演模拟采用球坐标系下交错网格有限差分方法，假设磁层环形电流源，正演电阻率结构模型采用"地表3-D电导+1-D层状背景"复合模型.数值模拟结果表明，中国地区沿海C-响应受海洋效应影响明显.在空间上，沿海岸线方向，受海洋效应影响，单周期的C-响应由无海洋效应的常值变形为平行于海岸线的等值线密集梯度带；在垂直海岸方向，海洋效应影响向内陆减小，其影响可达哈尔滨-贵阳一线.海洋效应影响采用比值法进行校正，以广州台站为例，在比值曲线上发现海洋效应对C-响应的影响最大周期可达20天左右，并且就中国沿海而言，相对全球平均一维模型，利用中国地区平均一维电导率模型作为背景模型的海洋效应校正结果更加合理.进一步对广州台站海洋效应校正前后的C-响应进行了1-D反演，由于校正前的C-响应在小周期时受海洋效应特别大，直接反演无法拟合数据；但校正后反演拟合明显变好，得到的1-D导电模型表明广州地区上地幔及地幔转换带的电阻率比中国平均电阻率高约一个量级，推测中国华南地区南部的地幔转换带可能处于相对冷的环境，该模型可能成为菲律宾海板块西向俯冲并滞留到华南大陆下方地幔转换带的电性证据.  相似文献   

Numerical assessment of tsunami attack on a rubble mound breakwater using OpenFOAM®     

《Applied Ocean Research》2018

A numerical assessment study of tsunami attack on the rubble mound breakwater of Haydarpasa Port, located at the southern entrance of the Istanbul Bosphorus Strait in the Sea of Marmara, Turkey, is carried out in this study using a Volume-Averaged Reynolds-Averaged Navier-Stokes solver, IHFOAM, developed in OpenFOAM^® environment. The numerical model is calibrated with and validated against the data from solitary wave and tsunami overflow experiments representing tsunami attack. Furthermore, attack of a potential tsunami near Haydarpasa Port is simulated to investigate effects of a more realistic tsunami that cannot be generated in a wave flume with the present state of the art technology. Discussions on practical engineering applications of this type of numerical modeling studies are given focusing on pressure distributions around the crown-wall of the rubble mound breakwater, and the forces acting on the single stone located behind the crown-wall at the rear side of the breakwater. Numerical modeling of stability/failure mechanism of the overall cross-section is studied throughout the paper.The present study shows that hydrodynamics along the wave flume and over the breakwater can be simulated properly for both solitary wave and tsunami overflow experiments. Stability of the overall cross-section can only be simulated qualitatively for solitary wave cases; on the other hand, the effect of the time elapsed during tsunami overflow cannot be reflected in the simulations using the present numerical tool. However, the stability of the overall cross-section under tsunami overflow is assessed by evaluating forces acting on the rear side armor unit supporting the crown-wall of the rubble mound breakwater as a practical engineering application in the present paper. Furthermore, two non-dimensional parameters are derived to discuss the stability of this armor unit; and thus, the stability condition of the overall cross-section. Approximate threshold values for these non-dimensional parameters are presented comparing experimental and numerical results as a starting point for engineers in practice. Finally, investigations on the solitary wave and tsunami overflow experiments/simulations are extended to the potential tsunami simulation in the scope of both representation of a realistic tsunami in a wave flume and stability of the rubble mound breakwater.  相似文献   

Effects of the geometry of two‐dimensional fractures on their hydraulic aperture and on the validity of the local cubic law          下载免费PDF全文

Ahmad Hajjar  Luc Scholtès  Constantin Oltéan  Michel Antoine Buès 《水文研究》2018,32(16):2510-2525

Flow through rough fractures is investigated numerically in order to assess the validity of the local cubic law for different fracture geometries. Two‐dimensional channels with sinusoidal walls having different geometrical properties defined by the aperture, the amplitude, and the wavelength of the walls' corrugations, the corrugations asymmetry, and the phase shift between the two walls are considered to represent different fracture geometries. First, it is analytically shown that the hydraulic aperture clearly deviates from the mean aperture when the walls' roughness, the phase shift, and/or the asymmetry between the fracture walls are relatively high. The continuity and the Navier–Stokes equations are then solved by means of the finite element method and the numerical solutions compared to the theoretical predictions of the local cubic law. Reynolds numbers ranging from 0.066 to 66.66 are investigated so as to focus more particularly on the effect of flow inertial effects on the validity of the local cubic law. For low Reynolds number, typically less than 15, the local cubic law properly describes the fracture flow, especially when the fracture walls have small corrugation amplitudes. For Reynolds numbers higher than 15, the local cubic law is valid under the conditions that the fracture presents a low aspect ratio, small corrugation amplitudes, and a moderate phase lag between its walls.  相似文献