Fresnel modeling of hematite crystal surfaces and application to martian hematite spherules     

Timothy D. Glotch  Philip R. Christensen  Thomas G. Sharp 《Icarus》2006,181(2):408-418

The gray crystalline hematite at Meridiani Planum first discovered by the Mars Global Surveyor Thermal Emission Spectrometer (MGS-TES) instrument occurs as spherules that have been interpreted as concretions. Analysis of the TES and mini-TES spectra shows that no 390 cm⁻¹ feature is present in the characteristic martian hematite spectrum. Here, we incorporate the mid-IR optical constants of hematite into a simple Fresnel reflectance model to understand the effect of emission angle and crystal morphology on the presence or absence of the 390 cm⁻¹ feature in an IR hematite spectrum. Based on the results we offer two models for the internal structure of the martian hematite spherules.  相似文献   

The importance of oxygen isotope provenance in relation to solute content of bulk meltwaters at Imersuaq Glacier,West Greenland     

Jacob C. Yde  N. Tvis Knudsen 《水文研究》2004,18(1):125-139

Stable oxygen isotope analysis and measurement of several dissolved cations and anions of bulk meltwater samples have provided information about the hydrochemical environment of the glacial hydrological system at Imersuaq Glacier, an outlet tongue from the Greenland ice‐sheet, West Greenland. The samples were collected at frequent intervals during the period 20–28 July 2000 in a small (<20 L s^?1) englacial meltwater outlet at the glacier margin. The results document the following findings: (i) a marked diurnal variation of δ¹⁸O is related to the composition of oxygen isotope provenances, mainly near‐marginal local superimposed ice and basal up‐sheared ice further up‐glacier; (ii) a relationship is seen between all base cations (Na⁺, K⁺, Ca²⁺, Mg²⁺), SO₄^2? and δ¹⁸O, indicating that solute acquisition is provided by solid–solution contact with the up‐sheared ice—as the relationship with Cl^? is weak the influence of seasalt‐derived solutes is small in the area; (iii) when the melt rate is high, two diurnal maxima of δ¹⁸O values and solute concentrations are measured, and it is suggested that a snow meltwater component is responsible for the second maximum of δ¹⁸O—a short residence time leads to a delayed decrease in ion concentrations. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Developing a Marine Information System by Integrating Existing Ocean Models Using Object-Oriented Technology     

A. Jacob  T. Hamre  G. Evensen  K. A. Mughal 《Marine Geodesy》2003,26(1):87-106

Information systems developed for different applications within the environmental domain have common characteristics, which can potentially be abstracted for sharing and reuse of design and software modules. This article presents an approach to designing for reuse by abstracting commonalities in the design of a Marine Information System (MIS), facilitating data management in a prototype operational monitoring, forecasting, and management system for the North Atlantic and the Nordic Seas. A detailed study of the requirements and data analysis was carried out, and Object-Oriented Technology (OOT) is employed to encapsulate abstractions and to promote reuse of code and design. This article identifies the Object-Oriented Frameworks (OOFW) required to build the MIS. It also provides guidelines to environmental scientists for restructuring legacy software and employing modern programming techniques.  相似文献   

Accumulation of organic and inorganic carbon in Pliocene–Pleistocene sediments along the SW African margin     

Jacques Giraudeau  Philip A. Meyers  Beth A. Christensen   《Marine Geology》2002,180(1-4):49-69

The Ocean Drilling Program Leg 175 recovered a unique series of stratigraphically continuous sedimentary sections along the SW African margin, an area which is presently affected by active coastal upwelling. The accumulation rates of organic and inorganic carbon are a major component of this record. Four Leg 175 sites (1082, 1084, 1085, 1087) are chosen as part of a latitudinal transect from the present northern to southern boundaries of the Benguela Current upwelling system, to decipher the Pliocene–Pleistocene history of biogenic production and its relationship with global and local changes in oceanic circulation and climate. The pattern of CaCO₃ and C_org mass accumulation rates (MARs) over 0.25-Myr intervals indicates that the evolution of carbon burial is highly variable between the northern and the southern Benguela regions, as well as between sites that have similar hydrological conditions. This, as well as the presence over most locations of high-amplitude, rapid changes of carbon burial, reflect the partitioning of biogenic production and patterns of sedimentation into local compartments over the Benguela margin. The combined mapping of CaCO₃ and C_org MARs at the study locations suggests four distinct evolutionary periods, which are essentially linked with major steps in global climate change: the early Pliocene, the mid-Pliocene warm event, a late Pliocene intensification of northern hemisphere glaciation and the Pleistocene. The early Pliocene spatially heterogeneous patterns of carbon burial are thought to reflect the occurrence of mass-gravitational movements over the Benguela slope which resulted in disruption of the recorded biogenic production. This was followed (3.5–3 Ma) by an episode of peak carbonate accumulation over the whole margin and, subsequently, by the onset of Benguela provincialism into a northern and a southern sedimentary regime near 2 Ma. This mid and late Pliocene evolution is interpreted as a direct response to changes in the ventilation of bottom and intermediate waters, as well as to dynamics of the subtropical gyral circulation and associated wind stress.  相似文献   

Correlation by Rb-Sr geochronology of garnet growth histories from different structural levels within the Tauern Window,Eastern Alps   总被引：1，自引：1，他引：0  

John N. Christensen  Jane Selverstone  John L. Rosenfeld  Donald J. DePaolo 《Contributions to Mineralogy and Petrology》1994,118(1):1-12

In order to evaluate rates of tectonometamorphic processes, growth rates of garnets from metamorphic rocks of the Tauern Window, Eastern Alps were measured using Rb-Sr isotopes. The garnet growth rates were determined from Rb-Sr isotopic zonation of single garnet crystals and the Rb-Sr isotopic compositions of their associated rock matrices. Garnets were analyzed from the Upper Schieferhülle (USH) and Lower Schieferhülle, (LSH) within the Tauern Window. Two garnets from the USH grew at rates of 0.67 _–0.13 ^+0.19 mm/million years and 0.88 _–0.19 ^+0.34 mm/million years, respectively, indicating an average growth duration of 5.4±1.7 million years. The duration of growth coupled with the amount of rotation recorded by inclusion trails in the USH garnets yields an average shear-strain rate during garnet growth of 2.7 _–0.7 ^+1.2 ×10^-14 s^-1. Garnet growth in the sample from the USH occurred between 35.4±0.6 and 30±0.8 Ma. The garnet from the LSH grew at a rate of 0.23±0.015 mm/million years between 62±1.5 Ma and 30.2±1.5 Ma. Contemporaneous cessation of garnet growth in both units at 30 Ma is in accord with previous dating of the thermal peak of metamorphism in the Tauern Window. Correlation with previously published pressure-temperature paths for garnets from the USH and LSH yields approximate rates of burial, exhumation and heating during garnet growth. Assuming that theseP — T paths are applicable to the garnets in this study, the contemporaneous exhumation rates recorded by garnet in the USH and LSH were approximately 4 _–2 ⁺³ mm/year and 2±1 mm/year, respectively.  相似文献   

Geography and Planning: Some Perspectives     

David E. Christensen 《The Professional geographer》1977,29(2):148-152

  相似文献   

A mixed spectral finite-difference model for pollutant concentrations over a hill     

Jacob Padro  John L. Walmsley 《Boundary-Layer Meteorology》1990,51(4):343-363

Given incident logarithmic profiles of wind and pollutant concentration above a rough, absorbing surface, the three-dimensional distribution of pollutant concentration over a hill of gentle slope is determined from a linearized model. The model is applied in neutrally stratified flow, without chemistry, and is integrated using spectral methods in the horizontal and a finite-difference scheme in the vertical. This approach allows for flexibility in choosing a closure scheme and a variety of surface boundary conditions. This was not possible in the analytic approach of Padro (1987) who added pollutant concentration and flux to the MS3DJH/1 model of Walmsley et al. (1980). The present model requires as input the turbulent kinetic energy, E, dissipation, , and the perturbation vertical velocity, w, from the three-dimensional boundary-layer flow model of Beljaars et al. (1987), hereinafter referred to as MSFD, The latter model also supplies wind velocity perturbations at the upper boundary, as input to upper boundary conditions on the pollutant flux perturbations.The present study describes applications of the model to idealized terrain features: isolated two- and three-dimensional hills and ridges and an infinite series of ridges. (Application to real terrain, however, presents no difficulties.) Comparisons were made with different (though uniform) surface roughnesses. Tests were performed to examine the effect of upstream terrain features in the periodic domain and to illustrate the importance of the vertical resolution of the output for interpreting results from the sinusoidal terrain case.  相似文献   

Explosion seismology in Central Europe — data and results | P. Giese,C. Prodehl and A. Stein (editors), 1976. Springer-Verlag,Berlin, 429 pp., $ 59.90     

A.W.B. Jacob 《Earth》1978,14(1):90-91

  相似文献   

Effect of lithospheric root on decompression melting in plume–lithosphere interaction models     

A. Manglik  U. R. Christensen 《Geophysical Journal International》2006,164(1):259-270

  相似文献   

Comparison of isotope pairing and N2:Ar methods for measuring sediment denitrification—Assumption, modifications, and implications     

Bradley D. Eyre  Søren Rysgaard  Tage Dalsgaard  Peter Bondo Christensen 《Estuaries and Coasts》2002,25(6):1077-1087

Denitrification has been measured during the last few years using two different methods in particular: isotope pairing measured on a triple-collector isotopic ratio mass spectrometer and N₂:Ar ratios measured on a membrane inlet mass spectrometer (MIMS). This study compares these two techniques in short-term batch experiments. Rates obtained using the original N₂∶Ar method were up to 3 to 4 times higher than rates obtained using the isotope pairing technique due to O₂ reacting with the N₂ during MIMS analysis. Oxygen combines with N₂ within the mass spectrometer ion source forming NO⁺ which reduces the N₂ concentration. The decrease in N₂ is least at lower O₂ concentrations and since oxygen is typically consumed during incubations of sediment cores, the result is often a pseudo-increase in N₂ concentration being interpreted as denitrification activity. The magnitude of this ocygen effect may be instrument specific. The reaction of O₂ with N₂ and the subsequent decrease in N₂ was only partly correctly using an O₂ correction curve for the relationship between N₂ and O₂ concentrations. The O₂ corrected N₂∶Ar denitrification rates were lower, but still did not match the isotope pairing rates and the variability between replicates was much higher. Using a copper reduction column heated to 600°C to remove all of the O₂ from the sample before MIMS analysis resulted in comparable rates (slightly lower), and comparable variability between replicates, to the isotope pairing technique. The N₂:Ar technique determines the net N₂ production as the difference between N₂ production by denitrification and N₂ consumption by N-fixation, while N-fixation has little effect on the isotope pairing technique which determines a rate very close to the gross N₂ production. When the two different techniques were applied on the same sediment, the small difference in rates obtained by the two methods seemed to reflect N-fixation as also supported from measurements of ethylene production in acetylene enriched sediment cores. The N₂:Ar and isotope pairing techniques may be combined to provide simultaneous measurements of denitrification and N-fixation. Both techniques have several assumptions that must be met to achieve accurate rates; a number of tests are outlined that can be applied to demonstrate that these assumptions are being meet.  相似文献