排序方式： 共有44条查询结果，搜索用时 156 毫秒
1.
S. M. Fatemi Aghda K. Ganjalipour M. Esmaeil Zadeh 《Geotechnical and Geological Engineering》2016,34(5):1487-1512
According to the International Society of Rock Mechanics, squeezing is a time dependent large deformation occurring during tunnel construction around the tunnel associated with creep caused by exceeding a limiting shear stress (Barla in ISRM News J 2:44–49, 1995). This research is conducted using a case study on the Nowsoud Tunnel, Iran. Being 14 km in length and 4.5 m in diameter, the tunnel is located in the western part of Iran near the Iraq border. Nowsoud tunnel, which was excavated using a double shield TBM, exhibited severe squeezing (with 8919 m) in its critical zone which resulted in excavation termination. In this research, the best approach for predicting squeezing among the recommended methods for reducing the damages caused by squeezing on TBM was determined. In this regard, approaches commonly used to predict squeezing are empirical, semi-empirical, and theoretical–analytical methods. Besides, these methods, numerical modeling is used to estimate convergence generated along the tunnel pathways, which is ultimately used to categorize squeezing. This paper compares squeezing prediction methods in 68 section of Nowsoud Tunnel. These 68 sections indicate that the empirical methods propose a general estimation/overview of squeezing. Among the semi-analytical approaches, the one proposed by Hoek and Marinos (Rock engineering in difficult rock conditions—soft rocks and karst, Taylor & Francis Group, London, pp 49–60, 2000) are compatible with the occurrence of squeezing in the critical zone. However, the degree of predicted squeezing is less than the real degree of squeezing in this zone. Based on the result of Aydan approach, 75 % of the tunnel sections are under squeezing condition. Theoretical–analytical approaches underestimate the possibility of squeezing in the critical zone. Barla?s approach (1995) demonstrated the possibility of squeezing in the critical zone with low intensity. The numerical computations in this paper were performed using Plaxis (version 8.5), a two-dimensional numerical program based on the finite element method. Plaxis results, classified by Hoek and Marinos (2000) method, show that 8800 m of the tunnel length is under the non-squeezing condition. According to all prediction methods, the squeezing zones depend on faulted zones, argillaceous limestone and shale formations such as J1Kh, J4Kh, J5Kh, and Kgr. These formations were identified with a high quantity of shale and argillaceous limestone. Bedding of these geological formations is thin and their geotechnical properties are weaker than those of limestone formations. On the other hand, non-squeezing zones depend on limestone formations such as J2Kh, J3Kh, J6Kh, Kabg, and Kbg. Moreover, all approaches predicted squeezing potential for the critical zone where TBM is jammed. 相似文献
2.
Landslide Susceptibility Mapping Using Fuzzy Logic System and Its Influences on Mainlines in Lashgarak Region,Tehran, Iran 总被引：1，自引：0，他引：1
S. M. Fatemi Aghda V. Bagheri M. Razifard 《Geotechnical and Geological Engineering》2018,36(2):915-937
Landslide susceptibility mapping is among the useful tools applied in disaster management and planning development activities in mountainous areas. The susceptibility maps prepared in this research provide valuable information for landslide hazard management in Lashgarak region of Tehran. This study was conducted to, first, prepare landslide susceptibility maps for Lashgarak region and evaluate landslide effect on mainlines and, second, to analyze the main factors affecting landslide hazard increase in the study area in order to propose efficient strategies for landslide hazard mitigation. A GIS-based multi-criteria decision analysis model (fuzzy logic) is used in the present work for scientific evaluation of landslide susceptible areas in Lashgarak region. To this end, ArcGIS, PCIGeomatica, and IDIRISI software packages were used. Eight information layers were selected for information analysis: ground strength class, slope angle, terrain roughness, normalized difference moisture index, normalized difference vegetation index, distance from fault, distance from the river, and distance from the road. Next, eight different scenarios were created to determine landslide susceptibility of the study area using different operators (intersection (AND), union (OR), algebraic sum (SUM), multiplication (PRODUCT), and different fuzzy gamma values) of fuzzy overlay approach. After that, the performance of various fuzzy operators in landslide susceptibility mapping was empirically compared. The results revealed the excellent consistency of landslide susceptibility map prepared using the fuzzy union (OR) operator with landslide distribution map in the study area. Eventually, the accuracy of landslide susceptibility map prepared using the fuzzy union (OR) operator was evaluated using the frequency ratio diagram. The results showed that frequency values of the landslides gradually increase from “low susceptibility” to high “susceptibility” as 88.34% of the landslides are categorized into two “high” and “very high” susceptibility classes, implying the satisfactory consistency between the landslide susceptibility map prepared using fuzzy union (OR) operator and landslide distribution map. 相似文献
3.
4.
H. R. Pourghasemi H. R. Moradi S. M. Fatemi Aghda C. Gokceoglu B. Pradhan 《Arabian Journal of Geosciences》2014,7(5):1857-1878
The aim of this study is to produce landslide susceptibility mapping by probabilistic likelihood ratio (PLR) and spatial multi-criteria evaluation (SMCE) models based on geographic information system (GIS) in the north of Tehran metropolitan, Iran. The landslide locations in the study area were identified by interpretation of aerial photographs, satellite images, and field surveys. In order to generate the necessary factors for the SMCE approach, remote sensing and GIS integrated techniques were applied in the study area. Conditioning factors such as slope degree, slope aspect, altitude, plan curvature, profile curvature, surface area ratio, topographic position index, topographic wetness index, stream power index, slope length, lithology, land use, normalized difference vegetation index, distance from faults, distance from rivers, distance from roads, and drainage density are used for landslide susceptibility mapping. Of 528 landslide locations, 70 % were used in landslide susceptibility mapping, and the remaining 30 % were used for validation of the maps. Using the above conditioning factors, landslide susceptibility was calculated using SMCE and PLR models, and the results were plotted in ILWIS-GIS. Finally, the two landslide susceptibility maps were validated using receiver operating characteristic curves and seed cell area index methods. The validation results showed that area under the curve for SMCE and PLR models is 76.16 and 80.98 %, respectively. The results obtained in this study also showed that the probabilistic likelihood ratio model performed slightly better than the spatial multi-criteria evaluation. These landslide susceptibility maps can be used for preliminary land use planning and hazard mitigation purpose. 相似文献
5.
6.
Mojtaba Pakparvar Hossein Hashemi Meisam Rezaei Wim M. Cornelis Gholamali Nekooeian Sayyed Ahang Kowsar 《水文科学杂志》2018,63(8):1183-1202
To assess recharge through floodwater spreading, three wells, approx. 30 m deep, were dug in a 35-year-old basin in southern Iran. Hydraulic parameters of the layers were measured. One well was equipped with pre-calibrated time domain reflectometry (TDR) sensors. The soil moisture was measured continuously before and after events. Rainfall, ponding depth and the duration of the flooding events were also measured. Recharge was assessed by the soil water balance method, and by calibrated (inverse solution) HYDRUS-1D. The results show that the 15 wetting front was interrupted at a layer with fine soil accumulation over a coarse layer at the depth of approx. 4 m. This seemed to occur due to fingering flow. Estimation of recharge by the soil water balance and modelling approaches showed a downward water flux of 55 and 57% of impounded floodwater, respectively. 相似文献
7.
Koohbanani Hamidreza Yazdani Mohammadreza Hosseini Sayyed Keivan 《Natural Hazards》2020,103(1):785-798
Natural Hazards - Due to excessive harvesting of underground water resources in many important aquifers inside Iran, ground subsidence is occurring at different speeds. In present study, InSAR... 相似文献
8.
9.
Comparative assessment of baseline concentration of the heavy metals in the soils of Tehran (Iran) with the comprisable reference data 总被引：1，自引：0，他引：1
Industrial soil systems have become complex due to human activities, as they disturb the natural development of soil and add
hazardous elements. Hence, there is a growing public concern over the accumulation of heavy metals in soil due to the rapid
industrial development during the last decade in Iran. The objectives of the present study are to carry out comparative assessment
of the heavy metals in soils of the Chitgar Industrial Area Tehran (Iran) with average world guidelines and to evaluate enrichment
and normalized scatter coefficient. In this work the concentrations of seven heavy metals (Cr, Co, Cd, Cu, Pb, Ni and Zn)
from the surface soils of the industrial area were quantified, based on 210 samples collected from 70 sampling stations in
three consecutive seasons May 2007, November 2007 and May 2008 using 0.5 × l Km square mesh. Common comparison methods were
employed to assess the quality of soils and guideline values were used to represent a desired level of elements. Comparison
variables and enrichment factor showed that Pb has high-level value while normalized scatter coefficient demonstrates that
Cd increases in soils more rapidly as compared to other elements. This study revealed that normalized scatter coefficient
can be effectively used to evaluate soil pollution and is independent of the past. 相似文献
10.
Quantitative and qualitative simulation of groundwater by mathematical models in Rafsanjan aquifer using MODFLOW and MT3DMS 总被引：1，自引：0，他引：1
Agriculture sector by using 80% of freshwater is the greatest water consumer in Iran. Excessive use of agricultural fertilizers in last decade, caused accumulation of enormous amounts of salts and subsequence declined the physical properties of soil. In desert and dry regions such as Rafsanjan plain, use of the groundwater resources is more than the surface water resources. Therefore, information about the quality of these resources remains a necessary task for optimum management, protection of water resources, and stopping the future damages. In this study, the groundwater quantity and quality of Rafsanjan plain was investigated by MODFLOW and MT3DMS. The presented quantitative model for this aquifer was compared by observed data and calibrated. This model was used to predict a 10-year period. Results show that water elevation decreases approximately 15 m for 10 years to come in this plain. Qualitative model results show that most quality parameters will increase. Electrical conductivity will increase more than other parameters. As values of this parameter will reach 16,000 µs/l for next 5 years. Therefore, we suggest that exploitation of water from these resources should be reduced and discharge from some of agricultural wells stop; also we suggested that recharge to groundwater resources should be increased and agricultural activities should be limited or improved using of modern irrigation systems in this plain. 相似文献