A plume tectonics model for the Tharsis province, Mars     

Daniel Mège  Philippe Masson 《Planetary and Space Science》1996,44(12):1499-1546

Morphological and structural data from the whole Tharsis province suggest that a number of shallow grabens radially oriented about the Tharsis bulge on Mars are underlain by dykes, which define giant radiating swarms similar to, e.g. the Mackenzie dyke swarm of the Canadian shield. Mechanisms for graben formation are proposed, and the depth, width, and height of the associated dykes are estimated. Structural mapping leads to define successive stages of dyke emplacement, and provide stress-trajectory maps that indicate a steady source of the regional stress during the whole history of the Tharsis province. A new tectonic model of Tharsis is presented, based on an analogy with dyke swarms on the Earth that form inside hot spots. This model successfully matches the following features: (1) the geometry of the South Tharsis Ridge Belt, which may have been a consequence of the compressional stress field at the boundary between the uplifted and non-uplifted areas in the upper part of the lithosphere at the onset of hot spot activity; (2) extensive lava flooding, interpreted as a consequence of the high thermal anomaly at the onset of plume (hot spot) activity; (3) wrinkle ridge geometry in the Tharsis hemisphere, the formation of which is interpreted as a consequence of buoyant subsidence of the brittle crust in response to the lava load; (4) Valles Marineris limited stretching by preliminary passive rifting, and uplift, viewed as a necessary consequence of adiabatic mantle decompression induced by stretching. The geometrical analysis of dyke swarms suggests the existence of a large, Tharsis-independent extensional state of stress during all the period of tectonic activity, in which the minimum compressive stress is roughly N---S oriented. Although magmatism must have loaded the lithosphere significantly after the plume activity ceased and be responsible for additional surface deformations, there is no requirement for further loading stress to explain surficial features. Comparison with succession of magmatic and tectonic events related to hot spots on the Earth suggests that the total time required to produce all the surface deformation observed in the Tharsis province over the last 3.8 Ga does probably not exceed 10 or 15 Ma.  相似文献   

Stable isotope study of the Archaean rocks of the Vredefort impact structure,central Kaapvaal Craton,South Africa     

Åke Fagereng  Chris Harris  Mandy La Grange  Gary Stevens 《Contributions to Mineralogy and Petrology》2008,155(1):63-78

The Vredefort dome in the Kaapvaal Craton was formed as a result of the impact of a large meteorite at 2.02 Ga. The central core of Archaean granitic basement rocks is surrounded by a collar of uplifted and overturned strata of the Witwatersrand Supergroup, exposing a substantial depth section of the Archaean crust. Orthogneisses of the core show little variation in whole-rock δ ¹⁸O value, with the majority being between 8 and 10‰, with a mean of 9.2‰ (n = 35). Quartz and feldspar have per mil differences that are consistent with O-isotope equilibrium at high temperatures, suggesting minimal interaction with fluids during subsequent cooling. These data refute previous suggestions that the Outer Granite Gneiss (OGG) and Inlandsee Leucogranofels (ILG) of the core represent middle and lower crust, respectively. Granulite-facies greenstone remnants from the ILG have δ ¹⁸O values that are on average 1.5‰ higher than the ILG host rocks and are unlikely, therefore, to represent the residuum from the partial melting event that formed the host rock. Witwatersrand Supergroup sedimentary rocks of the collar, which were metamorphosed at greenschist-to amphibolite-facies conditions, generally have lower δ ¹⁸O values than the core rocks with a mean value for metapelites of 7.7‰ (n = 45). Overall, through an ∼20 km thick section of crust, there is a general increase in whole-rock δ ¹⁸O value with increasing depth. This is the reverse of what is normal in the crust, largely because the collar rocks have δ ¹⁸O values that are unusually low in comparison with metamorphosed sedimentary rocks worldwide. The collar rocks have δD values ranging from −35 to −115‰ (average −62‰, n = 29), which are consistent with interaction with water of meteoric origin, having a δD of about −25 to −45‰. We suggest that fluid movement through the collar rocks was enhanced by impact-induced secondary permeability in the dome structure. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.  相似文献   

Diagenesis and fracturing of Paleocene–Eocene carbonate turbidite systems in the Ionian Basin: The example of the Kelçyra area (Albania)     

Nadge Vilasi  Rudy Swennen  Franois Roure 《Journal of Geochemical Exploration》2006,89(1-3):409

The Kelçyra area is emplaced in a foreland fold-and-thrust belt (FFTB), characterized by a westward thrusting with the Triassic evaporites as the major décollement level. Several secondary features related with this evolution, like backthrusting, folding, duplex structures, evaporite diapirism are present. During the FFTB evolution, the study area has been subjected to several fracturing events with associated stages of fluid migration. During the pre-deformational stage, complex textures such as crack-and-seal features most likely reflect expulsion of overpressured fluids. These fluids were dominantly host-rock buffered. Within the post-deformational stage, a meteoric fluid caused cementation and development of a karst network during a period of emergence after the thrust emplacement. Subsequently, Mg calcite reprecipitated in the more stable carbonate phase calcite and dolomite, which filled part of the karts network. The latter is finally dedolomitized and locally partially dissolved by a second meteoric fluid flow, which greatly increased the secondary porosity.  相似文献   

韧性剪切变形对岩石地球化学行为的制约——以北阿尔金巴什考供韧性剪切带为例   总被引：6，自引：0，他引：6  

戚学祥李海兵  吴才来陈松永 《地质通报》2005,24(3):252-257

韧性剪切变形对岩石地球化学行为的制约一直是地质学家们探讨的课题。本文以构成北阿尔金红柳沟——拉配泉俯冲碰撞杂岩带与北阿尔金地块边界的巴什考供斜向逆冲型韧性剪切带为例，通过对韧性剪切带内花岗岩变形前后不同变形强度构造岩的地球化学组成进行对比，确定等比线斜率，探讨韧性变形对岩石体积和成分变异的影响。计算结果表明，在糜棱岩化过程中，糜棱岩化花岗岩体积亏损21％，花岗质糜棱岩体积亏损31％。质量平衡计算结果和等比线图表明，韧；陛剪切作用导致SiO2，流失量最大，A12O3、K2O及Ba、Rb、Sr等都有不同程度的丢失，显示出较强的活动性，MnO、P2O5、Sc位于等比线上或附近，表现出相对的稳定性。岩石中活动组分的变异是流体渗滤作用引起的，不活动组分的变异是体．积亏损造成的。  相似文献   

地球深部物质的某些物性测量方法研究   总被引：8，自引：1，他引：8  

谢鸿森  周文戈  刘永刚  郭捷  侯渭 《地学前缘》2003,10(2):357-365

文中介绍了地球深部物质实验室近 2 0年来开展高温高压下地球深部物质物性实验研究过程中 ,在测量方法方面的进步和应用情况。这些测量方法包括了高温、高压下弹性的超声测量方法、高温高压下电性的测量方法、高压差热分析法和高压下热学Gr櫣ｎｅｉｓｅｎ参数的测量方法诟呶赂哐瓜卵沂涂笪锏牡猿饬恐?,我们由超声脉冲透射方法改进为超声脉冲透射反射法 ,克服了样品室中压力和温度梯度对样品的影响。在高温高压下岩石和矿物的电学性质测量中 ,我们由直流法发展为阻抗谱法 ,不仅克服了样品极化对测量结果的影响 ,还可以获得离子在溶液中的多种物理化学参数 ,以及监测含水矿物在高温高压下的脱水动力学特征。在固体传压介质中建立的高压热学Gr櫣ｎｅｉｓｅｎ参数的测量方法 ,由于升压速率比较小且叶蜡石在高压下的热导系数增大 ,其测量结果需要进行校正 ,其测量方法有待进一步改进。  相似文献   

Relationship Between Pre-failure and Post-failure Mechanical Properties of Rock Material of Different Origin     

Levent Tutluoğlu  İbrahim Ferid Öge  Celal Karpuz 《Rock Mechanics and Rock Engineering》2015,48(1):121-141

  相似文献   

Potential of SAR intensity tracking technique to estimate displacement rate in a landslide-prone area in Haridwar region,India     

Atanu Bhattacharya  Kriti Mukherjee  Manoj Kuri  Malte Vöge  M. L. Sharma  M. K. Arora  Rejinder K. Bhasin 《Natural Hazards》2015,79(3):2101-2121

  相似文献   

A gridded sea surface salinity data set for the tropical Pacific with sample applications (1950–2008)     

T. Delcroix  G. Alory  S. Cravatte  T. Corrège  M.J. McPhaden 《Deep Sea Research Part I: Oceanographic Research Papers》2011,58(1):38-48

We present a gridded data set of Sea Surface Salinity (SSS) for the tropical Pacific (120°E–70°W; 30°N–30°S), with a grid resolution of 1° longitude, 1° latitude and 1 month, from 1950 to 2008. The product, together with its associated error field, is derived from an objective analysis of about 10 million validated SSS records, with most of the data originating from Voluntary Observing Ships, TAO/TRITON moorings and Argo profilers (during the most recent period). We expect this product to benefit studies in oceanography, meteorology and paleoceanography. As examples of applications, we analyse: (a) the seasonal and ENSO (El Niño Southern Oscillation) modes of observed SSS variability, (b) the ability of 23 coupled models used in the Intergovernmental Panel for Climate Change 4th Assessment Report (IPCC AR4) to simulate the mean SSS and these two time varying modes, and (c) the usefulness of the SSS product and of its associated error field in calibrating and validating the paleo-salinity time series. We anticipate improvements and regular updates to our product, as more SSS data become available from in situ networks and from the ongoing and near-future satellite-derived observations by SMOS (Soil Moisture and Ocean Salinity) and Aquarius.  相似文献   

Free allocation in the 3rd EU ETS period: assessing two manufacturing sectors     

Christian Stenqvist  Max Åhman 《Climate Policy》2016,16(2):125-144

This article provides an analysis of the EU Emissions Trading Scheme (ETS) and the harmonized benchmark-based allocation procedures by comparing two energy-intensive sectors with activities in three Member States. These sectors include the cement industry (CEI) and the pulp and paper industry (PPI) in the UK, Sweden, and France. Our results show that the new procedures are better suited for the more homogeneous CEI, in which the outcome of stricter allocation of emissions allowances is consistent between Member States. For the more heterogeneous PPI – in terms of its product portfolios, technical infrastructures, and fuel mixes – the allocation procedures lead to diverse outcomes. It is the lack of product benchmark curves, and the alternative use of benchmark values that are biased towards a fossil fuel-mix and are based on specific energy use rather than emission intensity, which leads to allocations to the PPI that do not represent the average performance of the top 10% of GHG-efficient installations. Another matter is that grandfathering is still present via the historically based production volumes. How to deal with structural change and provisions regarding capacity reductions and partial cessation is an issue that is highly relevant for the PPI but less so for the CEI.

Policy relevance

After an unprecedented amount of consultation with industrial associations and other stakeholders, a harmonized benchmark-based allocation methodology was introduced in the third trading period of the EU ETS. Establishing a reliable and robust benchmark methodology for free allocation that shields against high direct carbon costs, is perceived as fair and politically acceptable, and still incentivizes firms to take action, is a significant challenge. This article contributes to a deeper understanding of the challenges in effectively applying harmonized rules in industrial sectors that are heterogeneous. This is essential for the debate on structural reformation of the EU ETS, and for sharing experiences with other emerging emissions trading systems in the world that also consider benchmark methodologies.  相似文献   

管状蠕虫Ridgeia piscesae TAK1的克隆及其转基因果蝇制备          下载免费PDF全文

赖庆娜  林鹭红  郭辉革  柯琳琳  阮灵伟  杨丽容  陈建明 《应用海洋学学报》2016,35(1):138-143

Ridgeia piscesae是唯一一种存在于东北太平洋Juan de Fuca Ridge热液区的管状蠕虫,我们成功通过RACE PCR获得Ridgeia piscesae TAK1(Rp TAK1)基因全长c DNA序列.为深入研究TAK1基因在管状蠕虫中的作用,本文通过显微注射获得Rp TAK1转基因果蝇,并在果蝇体内成功过表达Rp TAK1基因.我们发现由Rp TAK1编码的氨基酸序列具有一定保守性,可能暗示其功能上的保守性,同时也暗示TAK1蛋白在物种进化中的保守性.而过表达突变体果蝇的眼睛出现变异,包括眼睛变得粗糙、单眼排列不整齐及整体形状变小,可以看出Rp TAK1基因影响果蝇的机体发育,我们猜测在Rp TAK1基因在管状蠕虫的生长发育过程中也可能起到重要作用.  相似文献