排序方式： 共有40条查询结果，搜索用时 781 毫秒
1.
G. Petterson I. Renberg P. Geladi A. Lindberg F. Lindgren 《Journal of Paleolimnology》1993,9(3):195-208
As part of an investigation aimed at assessing the potential of northern Swedish varved lake sediments for fine-resolution reconstruction of past climatic conditions, the following questions were addressed; how representative is a single core, does the appearance of varves change as the sediment ages, and how can varve thickness and within-varve structures be digitized? Analyses of replicate cores from Kassjön, using sample sequences of seasonal, annual and centennial time resolution, show that spatial variability of sediment accumulation in the varved sediment is very low. Comparisons of intensity curves from image analysis of freeze cores of recent sediments from Lake Nylandssjön, sampled in 1980 and 1985, indicate that the varves acquire their appearance at the sediment-water interface during sedimentation and that the varve structures are preserved during diagenetic processes. Measurement of varve thicknesses with a tree-ring microscope and with image analysis gave similar results. However, with image analysis, within-varve structures such as colour variations and thicknesses of seasonal layers, can also be recorded, increasing the possibilities for palaeolimnological and palaeoclimatic inferences. 相似文献
2.
Summary The Åland, rapakivi batholith consists of several granites that differ texturally and mineralogically from quartz-porphyritic varieties to rapakivi varieties with K-feldspar ovoids (wiborgites and pyterlites) and aplitic granites. Closely associated with the batholith there is a mafc magmatic series of dolerite dykes, norites, anorthosites and monzodiorites.The earliest major intrusive phase of the Åland, rapakivi batholith consists of quartzporphyritic hornblende rapakivi. This rock contains small amoeboidal mafc enclaves, labradorite megacrysts, quartz ocelli, amphibole-mantled xenoliths and irregular clots of granophyric granite. These disequilibrium features are products of mixing between basaltic and granitic magmas. Geochemical modelling indicates that the quartzporphyritic hornblende rapakivi is a mixture of 15% hi-Fe monzodiorite (mafic endmember) and 85% quartz-feldspar porphyry (felsic end-member). The monzodiorite is derived from a norite-anorthosite-monzodiorite series. The quartz-feldspar porphyry is produced by partial melting of the country rock caused by intrusions of hot basic magma.Structural, textural and geochemical features suggest that magma mixing was an important petrogenetic process in the formation of the earliest rapakivi granite intrusions in the Åland, rapakivi batholith. Petrographic evidence of magma mixing can also be found in the major intrusion of the batholith, the wiborgite rapakivi granites. Chemically the mixing is difficult to specify in these rocks because of a high proportion of felsic component. Zircon and apatite fractionation trends, however, indicate that the wiborgite rapakivis also contain components from a mixed source.
With 5 figures 相似文献
Magmamixing, die petrogenetische Verbindung zwischen Anorthositen und RapakiviGraniten, Åland, SW Finnland
Zusammenfassung Der Rapakivi Batholit von Åland besteht aus verschiedenen Graniten, die in ihrer Textur und Zusammensetzung das Feld von quarzporphyritischen über Rapakivigranite mit K-Feldspat-Ovoiden (Wiborgite und Pyterlite) und aplitischen Graniten abdecken. Eine mafische magmatische Serie von Dolerit-Gängen, Noriten, Anorthositen und Monzodioriten ist mit diesen Batholiten eng verbunden.Die erste größere Intrusivphase des Åland, Rapakivi Batholiten besteht aus quarzporphyritischem Hornblende Rapakivi. Dieses Gestein enhält kleine Amöboide, mafische Enklaven, Labradorit Megakristalle, Quarzocelli, Xenolithe mit Amphibolrändern und unregelmäßige Aggregate von granophyrischem Granit. Diese Produkte von Ungleichgewichts-Bedingungen gehen auf die Mischung zwischen basaltischen und granitischen Magmen zurück. Geochemische Modelle zeigen, daß der quarzporphyritische Hornblende-Rapakivi eine Mischung von 15%. eisenreichen Monzodiorit (mafisches Endglied) und 85% Quarz-Feldspatporphyr (felsisches Endglied) ist. Der Monzodiorit stammt von einer Norit-Anorthosit-Monzodiorit Serie. Der QuarzFeldspat-Porphyr entstand durch teilweise Aufschmelzung des Nebengesteines, die durch Intrusionen heißen basischen Magmas verursacht wurden.Strukturelle, texturelle und geochemische Daten zeigen, daß Magmamischung ein wichtiger petrogenetischer Prozeß der Bildung der frühesten Rapakivi-Granit-Intrusionen im Åland, Batholith waren. Petrographische Hinweise auf Magmamischung können auch in der größten Intrusion des Batholiths, dem Wiborg Rapakivi Granit, gefunden werden. Wegen des hohen Anteils felsischer Komponenten ist es schwierig, das Magmamixing in diesen Gesteinen chemisch zu quantifizieren. Zirkon- und Apatitfraktionierungs-Trends weisen jedoch darauf hin, daß auch die WiborgitRapakivis Komponenten aus einer gemischten Quelle enthalten.
With 5 figures 相似文献
3.
This paper highlights an analytical method based on mass measurement that can be used to directly quantify 129I in groundwater samples at concentrations below the maximum contaminant level (MCL) without the need for sample pre-concentration or extraction. Samples were analyzed on a Perkin Elmer ELAN DRC II ICP-MS after minimal dilution using O2 as the reaction gas. Analysis of continuing calibration verification standards indicated that the dynamic reaction cell (DRC) mode could be used for quantitative analysis of 129I in samples below the MCL (0.0057 ng/mL or 1 pCi/L). The low analytical detection limit of 129I analysis in the DRC mode coupled with minimal sample dilution (1.02x) resulted in a final estimated quantification limit of 0.0051 ng/mL. Subsequent analysis of three groundwater samples containing 129I resulted in fully quantitative results in the DRC mode, and spike recovery analyses performed on all three samples confirmed that the groundwater matrix did not adversely impact the analysis of 129I in the DRC mode. This analytical approach has been proven to be a cost-effective, high-throughput technique for the direct, quantitative analysis of 129I in groundwater samples at environmentally relevant concentrations that reach below the current MCL. 相似文献
4.
William J. Deutsch Kirk J. Cantrell Kenneth M. Krupka Michael L. Lindberg R. Jeffery Serne 《Applied Geochemistry》2011,26(9-10):1681-1693
Residual waste is expected to be left in 177 underground storage tanks after closure at the US Department of Energy’s Hanford Site in Washington State, USA. In the long term, the residual wastes may represent a potential source of contamination to the subsurface environment. Residual materials that cannot be completely removed during the tank closure process are being studied to identify and characterize the solid phases and estimate the release of contaminants from these solids to water that might enter the closed tanks in the future. As of the end of 2009, residual waste from five tanks has been evaluated. Residual wastes from adjacent tanks C-202 and C-203 have high U concentrations of 24 and 59 wt.%, respectively, while residual wastes from nearby tanks C-103 and C-106 have low U concentrations of 0.4 and 0.03 wt.%, respectively. Aluminum concentrations are high (8.2–29.1 wt.%) in some tanks (C-103, C-106, and S-112) and relatively low (<1.5 wt.%) in other tanks (C-202 and C-203). Gibbsite is a common mineral in tanks with high Al concentrations, while non-crystalline U–Na–C–O–P ± H phases are common in the U-rich residual wastes from tanks C-202 and C-203. Iron oxides/hydroxides have been identified in all residual waste samples studied to date. Contaminant release from the residual wastes was studied by conducting batch leach tests using distilled deionized water, a Ca(OH)2-saturated solution, or a CaCO3-saturated water. Uranium release concentrations are highly dependent on waste and leachant compositions with dissolved U concentrations one or two orders of magnitude higher in the tests with high U residual wastes, and also higher when leached with the CaCO3-saturated solution than with the Ca(OH)2-saturated solution. Technetium leachability is not as strongly dependent on the concentration of Tc in the waste, and it appears to be slightly more leachable by the Ca(OH)2-saturated solution than by the CaCO3-saturated solution. In general, Tc is much less leachable (<10 wt.% of the available mass in the waste) than previously predicted. This may be due to the coprecipitation of trace concentrations of Tc in relatively insoluble phases such as Fe oxide/hydroxide solids. 相似文献
5.
Janina Konarska Fredrik Lindberg Annika Larsson Sofia Thorsson Björn Holmer 《Theoretical and Applied Climatology》2014,117(3-4):363-376
Trees play an important role in mitigating heat stress on hot summer days, mainly due to their ability to provide shade. However, an important issue is also the reduction of solar radiation caused by trees in winter, in particular at high latitudes. In this study, we examine the transmissivity of total and direct solar radiation through crowns of single street trees in Göteborg, Sweden. One coniferous and four deciduous trees of species common in northern European cities were selected for case study. Radiation measurements were conducted on nine clear days in 2011–2012 in foliated and leafless tree conditions using two sunshine pyranometers—one located in shade of a tree and the other one on the roof of an adjacent building. The measurements showed a significant reduction of total and direct shortwave radiation in the shade of the studied trees, both foliated and leafless. Average transmissivity of direct solar radiation through the foliated and defoliated tree crowns ranged from 1.3 to 5.3 % and from 40.2 to 51.9 %, respectively. The results confirm the potential of a single urban tree to reduce heat stress in urban environment. However, the relatively low transmissivity through defoliated trees should be considered while planning street trees in high latitude cities, where the solar access in winter is limited. The results were used for parameterisation of SOLWEIG model for a better estimation of the mean radiant temperature (Tmrt). Measured values of transmissivity of solar radiation through both foliated and leafless trees were found to improve the model performance. 相似文献
6.
7.
J.H. Telting G. Avila L. Buchhave S. Frandsen D. Gandolfi B. Lindberg H.C. Stempels the NOT staff S. Prins 《Astronomische Nachrichten》2014,335(1):41-45
FIES is a cross‐dispersed high‐resolution echelle spectrograph at the 2.56 m Nordic Optical Telescope (NOT), and was optimised for throughput and stability in 2006. The major 2006 upgrade involved the relocation of FIES to a stable environment and development of a fiber bundle that offers 3 different resolution modes, and made FIES an attractive tool for the user community of the NOT. Radial‐velocity stability is achieved through double‐chamber active temperature control. A dedicated data reduction tool, FIEStool, was developed. As a result of these upgrades, FIES is now one of the work‐horse instruments at the NOT. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim) 相似文献
8.
A closed-form analysis for elastic—plastic response of a circular hole in an infinite Mohr—Coulomb medium under axisymmetric loading shows the effect of repeated loading on the stress and displacement fields around the hole. Examples show how repeat-load closure increment is affected by working load, internal pressure, material compressive strength and internal friction. The solution is used to predict results of a laboratory test performed on a rock simulant specimen that contained a reinforced hole. Analytical and laboratory results are similar: at small closures (a few per cent, but well into the plastic response range), the closure increment from an unload—reload cycle is small compared with the initial closure. Closure increments for each of several cycles are comparable and cumulative. 相似文献
9.
The magnetic fields of celestial bodies are usually supposed to be due to a ‘hydromagnetic dynamo’. This term refers to a number of rather speculative processes which are supposed to take place in the liquid core of a celestial body. In this paper we shall follow another approach which is more closely connected with hydromagnetic processes well-known from the laboratory, and hence basically less speculative. The paper should be regarded as part of a general program to connect cosmical phenomena with phenomena studied in the laboratory. As has been demonstrated by laboratory experiments, a poloidal magnetic field may be increased by the transfer of energy from a toroidal magnetic field through kink instability of the current system. This mechanism can be applied to the fluid core of a celestial body. Any differential rotation will produce a toroidal field from an existing poloidal field, and the kink instability will feed toroidal energy back to the poloidal field, and hence amplify it. In the Earth-Moon system the tidal braking of the Earth's mantle acts to produce a differential angular velocity between core and mantle. The braking will be transferred to the core by hydromagnetic forces which at the same time give rise to a strong magnetic field. The strength of the field will be determined by the rate of tidal braking. It is suggested that the magnetization of lunar rocks from the period ?4 to ?3 Gyears derives from the Earth's magnetic field. As the interior of the Moon immediately after accretion probably was too cool to be melted, the Moon could not produce a magnetic field by hydromagnetic effects in its core. The observed lunar magnetization could be produced by such an amplified Earth field even if the Moon never came closer than 10 or 20 Earth's radii. This hypothesis might be checked by magnetic measurements on the Earth during the same period. 相似文献
10.
Dan-Erik Lindberg Kjell Leonardsson Anders G. Andersson T. Staffan Lundström Hans Lundqvist 《Limnologica》2013,43(5):339-347
The spatial distribution of upstream migrating Atlantic salmon (Salmo salar) spawners was studied in 2008 and 2009 in the surroundings of the tailrace from a hydropower station in the River Umeälven. This area is problematic because the fish have difficulties finding their way into the original riverbed, which prompted an investigation on the feasibility of adding a fishway in the area. Echo sounding was used in 2008 to investigate the spatial use of fish in the tailrace channel during the time of salmon migration. Presence of other fish species was so low that all echo sounding detections were assumed to be salmon. In 2009, data on wild radio-tagged salmon (n = 94) was collected in the same tailrace by an array of underwater antennas with a detection radius of approximately 10 m, to validate the results from the echo sounding. Both types of surveys showed aggregations of fish in one part of the tailrace. As a final step, Computational Fluid Dynamics (CFD) modeling was performed to analyze hydrodynamics. This CFD modeling showed a coincidence of fish detections in areas with turbulence intensities between 0.6 and 0.8, which may be an indication that the fish are holding in these areas to reduce energy expenditure during migration. A high proportion of the radio-tagged salmon were observed in the tailrace area (a median of 21 days between their first and last detection), indicating that the salmon are delayed in their upstream migration by the attraction to the tailrace in this area. The overall data on fish behavior in the tailrace led us to suggest a location for a new fishway where the fish aggregation was most pronounced. The number of detections from either technology had similar distributions over the tailrace, suggesting that the results are comparable. Thus, the split beam echo sounder can preferably be used to investigate which location is most appropriate for locations of entrances to new fishways since many more individual fishes are covered by this method compared to telemetry. Furthermore, there is no need to handle the fish in the echo sounding studies as is required in telemetry studies. 相似文献