Field Placement and Evaluation of Stabilized Dredged Material (SDM) from the New York/New Jersey Harbor     

A. Maher  W. S. Douglas  F. Jafari 《Marine Georesources & Geotechnology》2006,24(4):251-263

Since the 1997 local ban on ocean dumping of dredged sediments, the States of New York and New Jersey have pursued a policy of environmentally sound solutions to the management of dredged material, including beneficial use of stabilized dredged material (SDM) in transportation applications. A pilot study was initiated in 1998 to evaluate the use of SDM in the construction of highway embankments. Utilizing 80,000 cubic yards of dredged material, two embankments were constructed from SDM on a commercial development area adjacent to the Harbor. Geotechnical properties and handling of SDM were evaluated both during and one year post - construction. This article presents the evaluation of the embankments themselves, including constructability and performance. The results demonstrate that SDM satisfies most of the geotechnical criteria for fill construction, except those for durability, requiring proper coverage and protection similar to that provided for fills constructed on cohesive soils. This same characteristic precludes long term stockpiling of SDM prior to final placement, limiting applications to those that have schedules overlapping with dredging projects. Increased costs for the use of SDM can be as high as $8 per cubic yard over traditional fills; however, this cost may be recouped through management fees collected from dredging projects.  相似文献   

A combined mathematical geophysical model for prediction of pyrite oxidation and pollutant leaching associated with a coal washing waste dump   总被引：3，自引：0，他引：3  

F. Doulati Ardejani Ph.D.  B. Jodieri Shokri M.Sc.  A. Moradzadeh Ph.D.  E. Soleimani Ph.D.  M. Ansari Jafari Ph.D. 《International Journal of Environmental Science and Technology》2008,5(4):517-526

The waste produced by coal washing process produces many environmental problems. In this study, the pollution problems associated with the waste produced by Alborz Sharghi Coal Washing Plant was investigated by mathematical modeling. The study area is located at 11 km. to Razmjah coal region and 45 km. to Tehran-Mashhad road in the north part od Iran. To achieve the goal, a few samples were taken from different depths at three points on the waste dump in order to investigate pyrite oxidation and pollution generation. The samples were then analysed, using an AA-670 Shimadzu atomic absorption to determine the fraction of pyrite remained within the waste particles. A numerical finite volume model using Phoenics package has been developed to simulate pyrite oxidation and pollution generation from the Alborz Sharghi coal washing waste dump. The pyrite oxidation reaction is described by the shrinking-core model. Gaseous diffusion is the main mechanism for the transport of oxygen through the waste. The results of numerical modelling were compared with the field observations and close agreement was achieved. A simple mathematical model incorporating advection and hydrodynamic dispersion processes was also presented in order to verify the results of geophysical time-laps method showing transportation of the pollutants through the downstream of the waste dump. Both mathematical model and geophysical time-laps method are agreed in the identification of pollutant transport emanated from the waste dump. The results of such investigations can be used for designing an effective environmental management program.  相似文献   

Integrative propositions for adapting conservation policy to the impacts of climate change     

Shannon Hagerman  Hadi Dowlatabadi  Kai M.A. Chan  Terre Satterfield 《Global Environmental Change》2010,20(2):351-362

Conservation policies have changed over time in response to changes in human and ecological drivers. The impacts of climate (and other) concurrent changes prompt consideration of further iterations for both conservation means and objectives. In this paper we bring together previous disparate literatures and apply them to the question of how to adapt conservation polices to suit an era of climate change impacts. Our approach is based on two assertions: (i) that the integration of specific natural and social science insights is essential for understanding and effectively responding to this challenge, and (ii) that in addition to adaptive conservation means (strategies), attention needs to be given to considering adaptive conservation objectives. Specifically, we convert a core set of natural and social science insights into analytical tools known as heuristics or rules of thumb. We then use the heuristics as a basis to offer a list of preliminary propositions that can help inform the development of new means and objectives. The propositions address key considerations including recalibrating management objectives, the role of disturbance in facilitating ecological transitions, and overarching topics relating to governance. The propositions are speculative, and so intended only to outline potential avenues for further empirical research and subsequent refinement. In the spirit of adaptation, we expect and welcome their revision.  相似文献   

A new model of edge-to-edge contact for three dimensional discontinuous deformation analysis     

M. Mousakhani  A. Jafari 《Geomechanics and Geoengineering》2016,11(2):135-148

A robust contact theory can be regarded as key to three dimensional discontinuous deformation analyses (3D-DDA). Not only must this theory provide an efficient algorithm to judge the type and location of contacts but also it must be able to present comprehensive formulations for every kind of contact (open, sliding and locked contact). There are six types of contact in three dimensional discontinuous deformation analyses (vertex-to-vertex, vertex-to-edge, vertex-to-face, edge-to-edge, edge-to-face and face-to-face) that can be converted to vertex-to-face and edge-to-edge contacts. This paper presents a new model of edge-to-edge contact to three dimensional discontinuous deformation analyses (3D-DDA). This new model considers both kinds of edge-to-edge contact (cross-over and parallel edge-to-edge contact) and presents a criterion for inter-penetration. Sub matrices of normal and shear spring and friction force are derived by geometrical analysis and penalty method. This new model is implemented in a 3D-DDA computer programme, and the example results demonstrate the validity of the model.  相似文献   

Numerical simulation of groundwater flow and aquifer-system compaction using simulation and InSAR technique: Saveh basin,Iran     

Fatemeh Jafari  Saman Javadi  Golmar Golmohammadi  Neamat Karimi  Koroush Mohammadi 《Environmental Earth Sciences》2016,75(9):833

  相似文献   

An evaluation of the relationship between physical/mechanical properties and mineralogy of landscape rocks as determined by hyperspectral reflectance     

Erdem Emin Maras  Mustafa Caniberk  Mehmet Serhat Odabas  Burcu Degerli  Süleyman Sirri Maras  Hadi Hakan Maras 《Arabian Journal of Geosciences》2016,9(2):164

We investigated the relationships between mineral content and the physical and mechanical properties of landscape rock using a non-destructive remote sensing method applied in the laboratory. Using this technique, the spectral properties of the landscape rock could be collected at different wavelengths without harming the samples. Differences in spectral reflectance were compared with the physical and mechanical properties of the stone. Significant correlations were observed between reflectance values and the rocks’ mechanical and physical properties, with correlation coefficients of 95 to 99 %. However, establishing a correlation between two variables is not a sufficient condition to establish a causal relationship. Mineral densities and mineral content are characteristics used for the classification of landscape rock. We have concluded that although spectral signatures from landscape rock can be used for predicting which stones might have similar features when comparing two batches of stone, the high correlations we discovered cannot confirm a cause and effect relationship that would allow for the prediction of a rock’s physical and mechanical properties. Although this conclusion is disappointing, the mineral content and the significant correlations discovered by hyperspectral reflectance scanning can be used as supplementary information when comparing two samples of landscape rock.  相似文献   

Did satellite imagery supersede aerial imagery? A perspective from 3D geopositioning accuracy     

Altan Yilmaz  Mustafa Erdogan  Hadi Hakan Maras  Bahadir Aktug  Suleyman Sirri Maras 《Arabian Journal of Geosciences》2016,9(4):324

In this study, the geometric accuracy comparison of aerial photos and WorldView-2 satellite stereo image data is evaluated with the different number and the distribution of the ground control points (GCPs) on the basis of large scale map production. Also, the current situation of rivalry between airborne and satelliteborne imagery was mentioned. The geometric accuracy of Microsoft UltraCam X 45 cm ground sampling distance (GSD) aerial imagery and WorldView-2 data both with and without GCPs are also separately analyzed. The aerial photos without any GCP by only using global navigation satellite system (GNSS) and inertial measurement unit (IMU) data with tie points give an accuracy of ±1.17 m in planimetry and ±0.71 m in vertical that means nearly two times better accuracy than the rational polynomial coefficient (RPC) of stereo WorldView-2. Using one GCP affects the accuracies of aerial photos and WorldView-2 in different ways. While this situation distorts the aerial photo block, it corrects the shift effect of RPC in WorldView-2 and increases the accuracy. By using four or more GCPs, ½?pixel (～0.23 m) accuracy in aerial photos and 1 pixel (～0.50 m) accuracy in WorldView-2 can be achieved in horizontal. In vertical, aerial photos have 1 pixel (～0.55 m) and WorldView-2 has 1.5 pixels (～0.85 m) accuracy. These results show that Worldview-2 imagery can be used in the production of class I 1:5000 scale maps according to the ASPRS Accuracy Standards for Digital Geospatial Data in terms of geometric accuracy. It is concluded that the rivalry between aerial and satellite imagery will continue for some time in the future.  相似文献   

Computing derivative information of sequentially coupled subsurface models     

Rafael J. de Moraes  José R. P. Rodrigues  Hadi Hajibeygi  Jan Dirk Jansen 《Computational Geosciences》2018,22(6):1527-1541

A generic framework for the computation of derivative information required for gradient-based optimization using sequentially coupled subsurface simulation models is presented. The proposed approach allows for the computation of any derivative information with no modification of the mathematical framework. It only requires the forward model Jacobians and the objective function to be appropriately defined. The flexibility of the framework is demonstrated by its application in different reservoir management studies. The performance of the gradient computation strategy is demonstrated in a synthetic water-flooding model, where the forward model is constructed based on a sequentially coupled flow-transport system. The methodology is illustrated for a synthetic model, with different types of applications of data assimilation and life-cycle optimization. Results are compared with the classical fully coupled (FIM) forward simulation. Based on the presented numerical examples, it is demonstrated how, without any modifications of the basic framework, the solution of gradient-based optimization models can be obtained for any given set of coupled equations. The sequential derivative computation methods deliver similar results compared to FIM methods, while being computationally more efficient.  相似文献   

Subduction-related mafic to felsic magmatism in the Malayer–Boroujerd plutonic complex,western Iran     

Reza Deevsalar  Ryuichi Shinjo  Jean P. Liégeois  Mohammad V. Valizadeh  Jamshid Ahmadian  Hadi Yeganehfar  Mamoru Murata  Iain Neill 《Swiss Journal of Geoscience》2018,111(1-2):269-293

The Malayer–Boroujerd plutonic complex (MBPC) in western Iran, consists of a portion of a magmatic arc built by the northeast verging subduction of the Neo-Tethys plate beneath the Central Iranian Microcontinent (CIMC). Middle Jurassic-aged felsic magmatic activity in MBPC is manifested by I-type and S-type granites. The mafic rocks include gabbroic intrusions and dykes and intermediate rocks are dioritic dykes and minor intrusions, as well as mafic microgranular enclaves (MMEs). MBPC Jurassic-aged rocks exhibit arc-like geochemical signatures, as they are LILE- and LREE-enriched and HFSE- and HREE-depleted and display negative Nb–Ta anomalies. The gabbro dykes and intrusions originated from metasomatically enriched garnet-spinel lherzolite [Degree of melting (f_mel) ~ 15%] and exhibit negative Nd and positive to slightly negative ε_Hf(T) (+ 3.0 to ? 1.6). The data reveal that evolution of Middle Jurassic magmatism occurred in two stages: (1) deep mantle-crust interplay zone and (2) the shallow level upper crustal magma chamber. The geochemical and isotopic data, as well as trace element modeling, indicate the parent magma for the MBPC S-type granites are products of upper crustal greywacke (f_mel: 0.2), while I-type granites formed by partial melting of amphibolitic lower crust (f_mel: 0.25) and mixing with upper crustal greywacke melt in a shallow level magma chamber [Degree of mixing (f_mix): 0.3]. Mixing between andesitic melt leaving behind a refractory dense cumulates during partial crystallization of mantle-derived magma and lower crustal partial melt most likely produced MMEs (f_mix: 0.2). However, enriched and moderately variable ε_Nd(T) (? 3.21 to ? 4.33) and high (⁸⁷Sr/⁸⁶Sr)_i (0.7085–0.7092) in dioritic intrusions indicate that these magmas are likely experienced assimilation of upper crustal materials. The interpretations of magmatic activity in the MBPC is consistent with the role considered for mantle-derived magma as heat and mass supplier for initiation and evolution of magmatism in continental arc setting, elsewhere.  相似文献   

The effect of traffic on levels,distribution and chemical partitioning of harmful metals in the street dust and surface soil from urban areas of Tehran,Iran     

Ahmad Jonidi Jafari  Majid Kermani  Roshanak Rezaei Kalantary  Hossein Arfaeinia 《Environmental Earth Sciences》2018,77(2):38

Due to the explosive industrialization and rapid expansion of the population in many parts of the world, heavy metals are released into the environment continuously and pose a great risk on human health. Street dust and surface soil samples from very heavy, heavy, medium and low traffic areas and a natural site in Tehran, Iran, were analyzed for some physicochemical features, total and chemical fractionating of selected metals (Zn, Al, Sr, Pb, Cu, Cr, Cd, Co, Ni and V) to investigate the influence of traffic on their mobility and accumulation in the environment. The pH, electrical conductivity (EC), carbonates and organic carbon contents were similar in soil and dust samples from the areas with same traffic. The traffic increases EC contents in dust/soil matrixes, but has no effect on concentrations of metals in soil samples. Rises in metal levels with traffic were found in dust samples. Moreover, the traffic increases the percentage of both acid-soluble and reducible fractions, which are related to Pb and Zn. The mobilization of Cu, Zn, Pb, Cr in dust samples was easier than in soil. The speciation of metals except Cd is mainly affected by physicochemical features in soil, though total metals affected the speciation in dust samples (except chromium and nickel).  相似文献