Dynamic modelling of retrogressive landslides with emphasis on the role of clay sensitivity          下载免费PDF全文

Xue Zhang  Scott W. Sloan  Eugenio Oñate 《国际地质力学数值与分析法杂志》2018,42(15):1806-1822

This paper presents a detailed numerical study of the retrogressive failure of landslides in sensitive clays. The dynamic modelling of the landslides is carried out using a novel continuum approach, the particle finite element method, complemented with an elastoviscoplastic constitutive model. The multiwedge failure mode in the collapse is captured successfully, and the multiple retrogressive failures that have been widely observed in landslides in sensitive clays are reproduced with the failure mechanism, the kinematics, and the deposition being discussed in detail. Special attention has been paid to the role of the clay sensitivity on each retrogressive failure as well as on the final retrogression distance and the final run‐out distance via parametric studies. Moreover, the effects of the viscosity of sensitive clays on the failure are also investigated for different clay sensitivities.  相似文献   

Foraminiferal biostratigraphy and paleoenvironmental reconstruction at the Yaxcopoil‐1 drill hole,Chicxulub crater,Yucatán Peninsula     

Jos A. ARZ  Laia ALEGRET  Ignacio ARENILLAS 《Meteoritics & planetary science》2004,39(7):1099-1111

Abstract The Yaxcopoil‐1 (Yax‐1) drill hole comprises Cretaceous limestones and calcarenites, the K/P boundary cocktail unit (including impact breccia), and a Danian marly clay layer overlain by calcareous marls. The biostratigraphy, paleobathymetry, and environmental turnover across the K/P interval were inferred after analyzing the planktic and benthic foraminiferal assemblages. The Cretaceous samples only contain a few poorly preserved planktic foraminifera of a middle Campanian to Maastrichtian age, while low‐diversity benthic foraminiferal assemblages suggest a sufficient nutrient supply to the sea floor and a shallow neritic, occasionally stressed environment. The impact breccia and the redeposited suevite are overlain by a 46 cm‐thick dolomitic calcareous sandstone unit that contains scarce, reworked planktic foraminiferal specimens. This unit probably represents the uppermost part of the initial infill of the crater. The uppermost centimeters of this unit are bioturbated, and its top represents a hiatus that spans at least the G. cretacea, Pv. eugubina, and part of the P. pseudobulloides biozones. This unit is overlain by a 3–4 cm‐thick marly clay layer that represents a condensed layer. Benthic foraminiferal assemblages suggest a low food supply to the sea floor and environmental instability during the deposition of the marly clay layer. The increase in diversity of the assemblages indicates that the environmental conditions improved and stabilized from the G. compressa biozone toward the A. uncinata (P2) biozone. The Danian planktic and benthic foraminiferal assemblages indicate a deeper, probably bathyal environment.  相似文献   

The northern Patagonia Somuncura plateau basalts: a product of slab‐induced,shallow asthenospheric upwelling?     

Cristina de Ignacio  Ivan López  Roberto Oyarzun  & Alvaro Márquez 《地学学报》2001,13(2):117-121

The Meseta de Somuncura forms the largest basaltic plateau (20 000 km²) of southern Argentina (extra-Andean domain). Most of these tholeiitic to alkaline rocks were extruded at ˜ 25 Ma (late Oligocene). The absence of rifting–thinning processes, plume activity, or slab-window phenomena leaves only one major possibility for the generation of Somuncura: asthenospheric ('OIB-like') corner flow leading to a transient thermal anomaly above the subducting plate. It is suggested herein that the intake of hot asthenosphere was forced into a favourable topography (concave-up) of the subducting plate, when a major plate reorganization event (Farallon to Nazca) was taking place in late Oligocene to early Miocene time. The fast and vigorous intake of asthenosphere would have been induced by slab roll-back, leading to decoupling of the subducting plate. The Somuncura volcanic episode can be regarded as a marker of the passage from the extremely oblique subduction of Farallon, to the birth of the Nazca plate and roughly perpendicular convergence between South America and Nazca.  相似文献   

Formation of the regular satellites of giant planets in an extended gaseous nebula I: subnebula model and accretion of satellites     

Ignacio Mosqueira  Paul R. Estrada 《Icarus》2003,163(1):198-231

We model the subnebulae of Jupiter and Saturn wherein satellite accretion took place. We expect each giant planet subnebula to be composed of an optically thick (given gaseous opacity) inner region inside of the planet’s centrifugal radius (where the specific angular momentum of the collapsing giant planet gaseous envelope achieves centrifugal balance, located at rCJ ∼ 15R_J for Jupiter and rCS ∼ 22R_S for Saturn) and an optically thin, extended outer disk out to a fraction of the planet’s Roche-lobe (R_H), which we choose to be ∼R_H/5 (located at ∼150 R_J near the inner irregular satellites for Jupiter, and ∼200R_S near Phoebe for Saturn). This places Titan and Ganymede in the inner disk, Callisto and Iapetus in the outer disk, and Hyperion in the transition region. The inner disk is the leftover of the gas accreted by the protoplanet. The outer disk may result from the nebula gas flowing into the protoplanet during the time of giant planet gap-opening (or cessation of gas accretion). For the sake of specificity, we use a solar composition “minimum mass” model to constrain the gas densities of the inner and outer disks of Jupiter and Saturn (and also Uranus). Our model has Ganymede at a subnebula temperature of ∼250 K and Titan at ∼100 K. The outer disks of Jupiter and Saturn have constant temperatures of 130 and 90 K, respectively.Our model has Callisto forming in a time scale ∼10⁶ years, Iapetus in 10⁶-10⁷ years, Ganymede in 10³-10⁴ years, and Titan in 10⁴-10⁵ years. Callisto takes much longer to form than Ganymede because it draws materials from the extended, low density portion of the disk; its accretion time scale is set by the inward drift times of satellitesimals with sizes 300-500 km from distances ∼100R_J. This accretion history may be consistent with a partially differentiated Callisto with a ∼300-km clean ice outer shell overlying a mixed ice and rock-metal interior as suggested by Anderson et al. (2001), which may explain the Ganymede-Callisto dichotomy without resorting to fine-tuning poorly known model parameters. It is also possible that particulate matter coupled to the high specific angular momentum gas flowing through the gap after giant planet gap-opening, capture of heliocentric planetesimals by the extended gas disk, or ablation of planetesimals passing through the disk contributes to the solid content of the disk and lengthens the time scale for Callisto’s formation. Furthermore, this model has Hyperion forming just outside Saturn’s centrifugal radius, captured into resonance by proto-Titan in the presence of a strong gas density gradient as proposed by Lee and Peale (2000). While Titan may have taken significantly longer to form than Ganymede, it still formed fast enough that we would expect it to be fully differentiated. In this sense, it is more like Ganymede than like Callisto (Saturn’s analog of Callisto, we expect, is Iapetus). An alternative starved disk model whose satellite accretion time scale for all the regular satellites is set by the feeding of planetesimals or gas from the planet’s Roche-lobe after gap-opening is likely to imply a long accretion time scale for Titan with small quantities of NH₃ present, leading to a partially differentiated (Callisto-like) Titan. The Cassini mission may resolve this issue conclusively. We briefly discuss the retention of elements more volatile than H₂O as well as other issues that may help to test our model.  相似文献   

On the Nonlinear Thermal Evolution of Solar Corona Structures     

C.A. Mendoza-Briceño 《Astrophysics and Space Science》1997,256(1-2):387-392

The thermal evolution of structures is investigated for different values of the size of structure. A simplified cooling function and a constant heating mechanism are assumed. Analytical criteria for thermal instability are obtained. It is found that the response of the thermal structure not only depends on the amplitude of the disturbances, but also on whether the disturbance increases or decreases the initial steady temperature. Additionally, the evolution of the structure is examined numerically by using a time-dependent code under the assumption that the inertia terms are small. In particular, the analytical criteria obtained for thermal instability are verified.  相似文献   

Reliability assessment of granular filters in embankment dams     

Roberto Mínguez  Fernando Delgado  Ignacio Escuder  Manuel G. de Membrillera 《国际地质力学数值与分析法杂志》2006,30(10):1019-1037

Empirical criteria have been used successfully to design filters of most embankment large dam projects throughout the world. However, these empirical rules are only applicable to a particular range of soils tested in laboratory and do not take into account the variability of the base material and filter particle sizes. In addition, it is widely accepted that the safety of fill dams is mainly dependent on the reliability of their filter performance. The work herein presented consists in a new general method for assessing the probability of fulfilling any empirical filter design criteria accounting for base and filter heterogeneity by means of first‐order reliability methods (FORM), so that reliability indexes and probabilities of fulfilling any particular criteria are obtained. This method will allow engineers to estimate the safety of existing filters in terms of probability of fulfilling their design criteria and might also be used as a decision tool on sampling needs and material size tolerances during construction. In addition, sensitivity analysis makes possible to analyse how reliabilities are influenced by different sources of input data. Finally, in case of a portfolio risk assessment, this method will allow engineers to compare the safety of several existing dams in order to prioritize safety investments and it is expected to be a very useful tool to evaluate probabilities of failure due to internal erosion. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

Building blocks in hierarchical clustering scenarios and their connection with damped Lyα systems     

Sofía A. Cora  Patricia B. Tissera †  Diego G. Lambas ‡  Mirta B. Mosconi 《Monthly notices of the Royal Astronomical Society》2003,343(3):959-970

  相似文献   

The star formation history of intermediate-redshift late-type galaxies     

Ignacio Ferreras  Joseph Silk  Asmus Böhm  Bodo Ziegler 《Monthly notices of the Royal Astronomical Society》2004,355(1):64-72

  相似文献   

Testing the consistency of the Starburst scenario for active galactic nuclei     

María Luisa García Vargas  Angeles Díaz  Roberto Terlevich  Elena Terlevich 《Astrophysics and Space Science》1993,205(1):77-84

In the frame of the Starburst Model, we show that the evolution of a massive stellar cluster in a high metallicity environment can reproduce the observed emission-line spectrum and the UV-optical Spectral Energy Distribution of the Seyfert 2 galaxies and LINERs. We apply the results of our models to three objects: NGC 5506, NGC 5643 and Mk 348.  相似文献   

Chemical Enrichment of the Intra-Cluster Medium     

SofÍa A. Cora  Simon D.M. White 《Astrophysics and Space Science》2003,284(2):425-428

We investigate the metal enrichment of the intra-cluster medium by using a method that combines N-Body simulations and a semi-analytic model (SAM) of galaxy formation. The cluster of galaxies is simulated in a flat, low density universe, with a numerical resolution that allows the detection of substructures in the dark matter background of the cluster. The phenomenological approach used to model the physical processes involved in the galaxy formation and metal production is applied to the substructures found in the dark matter halos detected at different redshifts. Details of the chemical implementation in the SAM and first results related to the mean properties of the baryonic matter components are presented. This revised version was published online in August 2006 with corrections to the Cover Date.  相似文献