Sediment Trend Analysis through the variation of granulometric parameters: A review of theories and applications     

Emmanuel Poizot  Yann Méar  Laurie Biscara 《Earth》2008,86(1-4):15-41

Spatial variations in grain-size parameters (i.e. grain-size trends) contain information on sediment transport patterns. Analytical procedures have been proposed using the grain-size trend to determine net sediment transport pathways. In the first part of this study, the fundamentals of the theory are presented through methods for analysing 1D and 2D variations. The methods used are critically discussed, while pointing out some severe problems. So far, these methods suffer from limitations leading to serious interpretational errors, making it necessary to take account of two kinds of uncertainties. Inputs uncertainties are linked to the physical sediment properties as well as procedures of sampling and analysis. Model uncertainties are then discussed for each step of the grain-size trend analysis. The validity of Sediment Trend Analysis under natural conditions is tested against published field studies to determine the most appropriate variation trend to use in a specific environment. Proposals are given for each step of the procedure for optimal use of the method using a Quality Assurance (QA) approach. Further developments are proposed, such as integration into a Geographic Information System.  相似文献   

Fractionation of Cu and Zn isotopes during adsorption onto amorphous Fe(III) oxyhydroxide: Experimental mixing of acid rock drainage and ambient river water     

Laurie S. Balistrieri  David M. Borrok  W. Ian Ridley 《Geochimica et cosmochimica acta》2008,72(2):311-328

Fractionation of Cu and Zn isotopes during adsorption onto amorphous ferric oxyhydroxide is examined in experimental mixtures of metal-rich acid rock drainage and relatively pure river water and during batch adsorption experiments using synthetic ferrihydrite. A diverse set of Cu- and Zn-bearing solutions was examined, including natural waters, complex synthetic acid rock drainage, and simple NaNO₃ electrolyte. Metal adsorption data are combined with isotopic measurements of dissolved Cu (⁶⁵Cu/⁶³Cu) and Zn (⁶⁶Zn/⁶⁴Zn) in each of the experiments. Fractionation of Cu and Zn isotopes occurs during adsorption of the metal onto amorphous ferric oxyhydroxide. The adsorption data are modeled successfully using the diffuse double layer model in PHREEQC. The isotopic data are best described by a closed system, equilibrium exchange model. The fractionation factors (α_soln-solid) are 0.99927 ± 0.00008 for Cu and 0.99948 ± 0.00004 for Zn or, alternately, the separation factors (Δ_soln-solid) are −0.73 ± 0.08‰ for Cu and −0.52 ± 0.04‰ for Zn. These factors indicate that the heavier isotope preferentially adsorbs onto the oxyhydroxide surface, which is consistent with shorter metal-oxygen bonds and lower coordination number for the metal at the surface relative to the aqueous ion. Fractionation of Cu isotopes also is greater than that for Zn isotopes. Limited isotopic data for adsorption of Cu, Fe(II), and Zn onto amorphous ferric oxyhydroxide suggest that isotopic fractionation is related to the intrinsic equilibrium constants that define aqueous metal interactions with oxyhydroxide surface sites. Greater isotopic fractionation occurs with stronger metal binding by the oxyhydroxide with Cu > Zn > Fe(II).  相似文献   

Dissolved and labile concentrations of Cd, Cu, Pb, and Zn in the South Fork Coeur d’Alene River, Idaho: Comparisons among chemical equilibrium models and implications for biotic ligand models     

Laurie S. Balistrieri  Richard G. Blank 《Applied Geochemistry》2008,23(12):3355-3371

In order to evaluate thermodynamic speciation calculations inherent in biotic ligand models, the speciation of dissolved Cd, Cu, Pb, and Zn in aquatic systems influenced by historical mining activities is examined using equilibrium computer models and the diffusive gradients in thin films (DGT) technique. Several metal/organic-matter complexation models, including WHAM VI, NICA-Donnan, and Stockholm Humic model (SHM), are used in combination with inorganic speciation models to calculate the thermodynamic speciation of dissolved metals and concentrations of metal associated with biotic ligands (e.g., fish gills). Maximum dynamic metal concentrations, determined from total dissolved metal concentrations and thermodynamic speciation calculations, are compared with labile metal concentrations measured by DGT to assess which metal/organic-matter complexation model best describes metal speciation and, thereby, biotic ligand speciation, in the studied systems. Results indicate that the choice of model that defines metal/organic-matter interactions does not affect calculated concentrations of Cd and Zn associated with biotic ligands for geochemical conditions in the study area, whereas concentrations of Cu and Pb associated with biotic ligands depend on whether the speciation calculations use WHAM VI, NICA-Donnan, or SHM. Agreement between labile metal concentrations and dynamic metal concentrations occurs when WHAM VI is used to calculate Cu speciation and SHM is used to calculate Pb speciation. Additional work in systems that contain wide ranges in concentrations of multiple metals should incorporate analytical speciation methods, such as DGT, to constrain the speciation component of biotic ligand models.  相似文献   

The Vigny limestones: a record of Palaeocene (Danian) tectonic-sedimentary events in the Paris Basin     

Christian Montenat  Pascal Barrier  Philippe Ott D'Estevou 《Sedimentology》2002,49(3):421-440

Danian marine sedimentation in the Paris Basin occurred between two major erosional phases. The earlier was responsible for the stripping of presumably deposited Maastrichtian sediments and of a variable thickness of Campanian chalk. The later occurred during the late Palaeocene and resulted in the erosion of almost all Danian deposits, which are now limited to small and scattered outcrops. One of these outcrops corresponds to reefal and peri‐reefal limestones of middle to late Danian age, exposed in the quarries of Vigny (NW of Paris). Danian deposits here show intricate relations with the surrounding Campanian chalk. Danian sedimentation was contemporaneous with faulting, which generated signifiant sea‐floor relief and resulted in contrasting depositional areas: topographic highs with coralgal reefs, and depressions where calcirudite channel fill accumulated. Normal faulting occurred along WNW–ESE master faults. The generation of submarine fault scarps gave rise to various types of gravity‐driven phenomena, including the sliding and slumping of large blocks of reefal limestone and the deposition of carbonate debris flows. Along with the redeposition of the Danian carbonates, flows of fluidized and reworked Campanian chalk resulted from the peculiar physical properties of the undercompacted chalks. Erosion and faulting occurred predominantly during the Palaeocene and represent a major episode in the physiographic evolution of the Paris Basin.  相似文献   

Fracturation d'âge Aptien supérieur sur la bordure orientale de la plate-forme arabique (Haushi-Huqf,Oman)Aptian faulting (Shu'aiba Formation) on the eastern edge of the Arabian Platform (Haushi-Huqf,Oman)     

Christian Montenat  Pascal Barrier 《Comptes Rendus Geoscience》2002,334(10):781-787

In the Haushi-Huqf (Eastern Central Oman) as in other parts of the Arabian platform, a major sedimentary break is recorded between the Early Aptian carbonates (Shu'aiba Formation) and the Albian orbitolinid-rich marls (Nahr Umr Formation). The unconformity corresponds to a succession of events: (1) a brusque interruption of the regressive sequence of the Shu'aiba limestone (algae and small rudistid build-ups); (2) a stratigraphic gap related to the Late Aptian; (3) the development of a thick ferruginous crust (hardground) that covered the top surface of the Shu'aiba; the hardground is related to a forced flooding surface; (4) the Shu'aiba was rapidly drowned and buried under the Nahr Umr marls. Moreover, the Shu'aiba limestone was subject to faulting NW–SE-trending normal faults before lithification and formation of the ferruginous crust. The faulting episode is clearly dated: post-Early Aptian and pre-Albian. The signification of the faulting remains hypothetical. The syndiagenetic NW–SE normal faults may correspond to ‘en echelon’ faults, combined with transcurrent fault movements (for example the Haushi-Nafun Fault). The possible causes of these intra-platform transcurrent movements are discussed. To cite this article: C. Montenat, P. Barrier, C. R. Geoscience 334 (2002) 781–787.  相似文献   

Oxygen isotope heterogeneity in chondrules from the Mokoia CV3 carbonaceous chondrite     

Rhian H Jones  Laurie A Leshin  Zachary D Sharp  Alan J Schilk 《Geochimica et cosmochimica acta》2004,68(16):3423-3438

We report a study of the oxygen isotope ratios of chondrules and their constituent mineral grains from the Mokoia, oxidized CV3 chondrite. Bulk oxygen isotope ratios of 23 individual chondrules were determined by laser ablation fluorination, and oxygen isotope ratios of individual grains, mostly olivine, were obtained in situ on polished mounts using secondary ion mass spectrometry (SIMS). Our results can be compared with data obtained previously for the oxidized CV3 chondrite, Allende. Bulk oxygen isotope ratios of Mokoia chondrules form an array on an oxygen three-isotope plot that is subparallel to, and slightly displaced from, the CCAM (carbonaceous chondrite anhydrous minerals) line. The best-fit line for all CV3 chondrite chondrules has a slope of 0.99, and is displaced significantly (by δ¹⁷O ∼ −2.5‰) from the Young and Russell slope-one line for unaltered calcium-aluminum-rich inclusion (CAI) minerals. Oxygen isotope ratios of many bulk CAIs also lie on the CV-chondrule line, which is the most relevant oxygen isotope array for most CV chondrite components. Bulk oxygen isotope ratios of most chondrules in Mokoia have δ¹⁸O values around 0‰, and olivine grains in these chondrules have similar oxygen isotope ratios to their bulk values. In general, it appears that chondrule mesostases have higher δ¹⁸O values than olivines in the same chondrules. Our bulk chondrule data spread to lower δ¹⁸O values than any ferromagnesian chondrules that have been measured previously. Two chondrules with the lowest bulk δ¹⁸O values (−7.5‰ and −11.7‰) contain olivine grains that display an extremely wide range of oxygen isotope ratios, down to δ¹⁷O, δ¹⁸O around -50‰ in one chondrule. In these chondrules, there are no apparent relict grains, and essentially no relationships between olivine compositions, which are homogeneous, and oxygen isotopic compositions of individual grains. Heterogeneity of oxygen isotope ratios within these chondrules may be the result of incorporation of relict grains from objects such as amoeboid olivine aggregates, followed by solid-state chemical diffusion without concomitant oxygen equilibration. Alternatively, oxygen isotope exchange between an ¹⁶O-rich precursor and an ¹⁶O-poor gas may have taken place during chondrule formation, and these chondrules may represent partially equilibrated systems in which isotopic heterogeneities became frozen into the crystallizing olivine grains. If this is the case, we can infer that the earliest nebular solids from which chondrules formed had δ¹⁷O and δ¹⁸O values around -50‰, similar to those observed in refractory inclusions.  相似文献   

L'accident du Toulourenc : une limite tectonique entre la plate-forme provençale et le Bassin vocontien à l'Aptien–Albien (SE France)     

Christian Montenat  Marie-Christine Janin  Pascal Barrier 《Comptes Rendus Geoscience》2004,336(14):1301-1310

The WNW–ESE trending Toulourenc Fault Zone (TFZ) is the western segment of the major Ventoux–Lure Fault Zone, which separates the Provençal platform from the Baronnies Vocontian Basin. The TFZ was subject to polyphased Mid-Cretaceous movements, during the Early Aptian and Middle–Late Albian times. The latter faulting episode generated conglomerates and olistoliths resulting from dismantled faultscarps cutting Barremian–Bedoulian limestones. The deformation is related to compressional wrench faulting (NE–SW sinistral faults; dextral component for the TFZ). It induced the uplift of the northwestern corner of the platform, as indicated by a mid-Cretaceous hiatus (Early Aptian pro parte to Early Albian) narrowly delimited in space. The opening of submeridian grabens within the platform favoured the northward transit of channelised coarse-grained Albian sands originating from a southern area. To cite this article: C. Montenat et al., C. R. Geoscience 336 (2004).  相似文献   

PUTTING THE MESSINESS BACK IN: TOWARDS A GEOGRAPHY OF DEVELOPMENT AS CREATIVITY     

Nina D. Laurie 《Singapore journal of tropical geography》2005,26(1):32-35

  相似文献   

Oblique oceanic opening and passive margin irregularity,as inherited in the Zagros fold‐and‐thrust belt     

Payman Navabpour  Eric Barrier  Harry McQuillan 《地学学报》2014,26(3):208-215

The Zagros fold‐and‐thrust belt of SW Iran represents deformation of the former Arabian passive margin since Permian–Triassic opening of the Neo‐Tethys ocean. The Zagros belt is characterized by a present‐day structural salient‐recess setting inherited from past marginal embayment‐promontory geometry, which was involved in discontinuous ophiolite obduction and diachronous continental collision. We examine outcrop‐scale Mesozoic extensional brittle tectonics, preserved as syn‐depositional normal faults within the folded strata, in terms of stress tensor inversion. The result is then integrated with belt‐scale isopach, seismic and topographical data to delineate the geometry of a major irregularity along the passive margin originating from oblique oceanic opening. The implication of this configuration within the tectonic framework of oceanic closure is discussed.  相似文献   

Neotethyan closure history of western Anatolia: a geodynamic discussion   总被引：1，自引：0，他引：1  

Amaury Pourteau  Roland Oberhänsli  Osman Candan  Eric Barrier  Bruno Vrielynck 《International Journal of Earth Sciences》2016,105(1):203-224

  相似文献