Introducing a new conceptual instantaneous unit hydrograph model based on a hydraulic approach     

Setareh Khaleghi  Mohammad Parvin Nia 《水文科学杂志》2013,58(13-14):1967-1975

ABSTRACT

A novel approach is introduced for simulation of instantaneous unit hydrographs (IUHs). The model consists of a series of linear reservoirs that are connected to each other, and is referred to as the inter-connected linear reservoir model (ICLRM). By assuming the flow between two reservoirs is a linear function of the difference between the water levels in the reservoirs, a system of first-order linear differential equations is obtained as the ICLRM governing equation. By solving the equations, the discharge from the last reservoir is considered as an IUH. A small-scale laboratory device was constructed for the simulation of IUHs using the model. By studying four hydrographs extracted from the literature, and simulating them using both the ICLRM and the Nash model, it is concluded that the ICLRM can predict these hydrographs more accurately than the Nash model. Due to the simplicity of the construction and operation of the ICLRM and, more importantly, its visual aspect, the ICLRM may be considered as an effective educational tool for studying IUHs.  相似文献   

TiO<Subscript>2</Subscript>-based shaped catalyst for the recovery of elemental sulfur from H<Subscript>2</Subscript>S and SO<Subscript>2</Subscript> gas streams     

V. Nourozi Rad  M. Anbia  M. Hossaini Sadr 《International Journal of Environmental Science and Technology》2018,15(3):631-636

The Claus process has been used for the conversion of H₂S and SO₂ to elemental sulfur. These two sulfur compounds need special attention because they are very poisonous with negative impact on both the environment and human health. Here, highly active Fe–Ni/TiO₂ catalyst has been prepared and shaped by three different binders (bentonite, polyethylene glycol and carboxymethyl cellulose) into extrudes. Comparing the mechanical strength and surface area of prepared extrudes, the optimal shaped catalyst was selected with 20% of bentonite, 2% of PEG and 2% of CMC. The optimal catalyst was characterized by X-ray powder diffraction, temperature-programmed reduction, Brunauer–Emmett–Teller specific surface area, Barrett–Joyner–Halenda, scanning electron microscopy and energy-dispersive X-ray techniques and used for sulfur recovery process. The performance of this product for sulfur recovery via Claus process was excellent with the conversion of hydrogen sulfide of 76.77% and sulfur dioxide of 97.83%. The catalyst also provides high hydrolysis activity of CS₂ (83.06%). Therefore, a highly active TiO₂-supported shaped catalyst with 85.62% of conversion efficiency has been prepared successfully to convert the small amounts of H₂S, SO₂ and CS₂ to elemental sulfur.  相似文献   

Determination of Geopotential Differences between Local Vertical Datums and Realization of a World Height System   总被引：2，自引：0，他引：2  

Burša  Milan  Kouba  Jan  Müller  Achim  Raděj  Karel  True  Scott A.  Vatrt  Viliam  Vojtíšková  Marie 《Studia Geophysica et Geodaetica》2001,45(2):127-132

The methodology developed for connecting Local Vertical Datums (LVD) was applied to the Australian Height Datum (AHD) and the North American Vertical Datum (NAVD88). The geopotential values at AHD and NAVD88 were computed and the corresponding vertical offset of 974 mm with rms 51 mm was obtained between the zero reference surfaces defined by AHD and NAVD88. The solution is based on the four primary geodetic parameters, the GPS/levelling sites and the geopotential model EGM96. The Global Height System (or the Major Vertical Datum) can be defined by a geoidal geopotential value used in the solution as the reference value, or by the geopotential value of the LVD, e.g. NAVD88.  相似文献   

Differences between Mean Sea Levels for the Pacific,Atlantic and Indian Oceans From Topex/Poseidon Altimetry     

Burša  Milan  Kouba  Jan  Müller  Achim  Raděj  Karel  True  Scott A.  Vatrt  Viliam  Vojtíšková  Marie 《Studia Geophysica et Geodaetica》1999,43(1):1-6

Geopotential values W of the mean equipotential surfaces representing the mean ocean topography were computed on the basis of four years (1993 - 1996) TOPEX/POSEIDON altimeter data: W = 62 636 854.10m ² s ^–2 for the Pacific (P), W = 62 636 858.20m ² s ^–2 for the Atlantic (A), W = 62 636 856.28m ²s^–2 for the Indian (I) Oceans. The corresponding mean separations between the ocean levels were obtained as follows: A – P = – 42 cm, I– P = – 22 cm, I – A = 20 cm, the rms errors came out at about 0.3 cm. No sea surface topography model was used in the solution.  相似文献   

Prediction of Flyrock in Mine Blasting: A New Computational Intelligence Approach     

Nikafshan Rad  Hima  Bakhshayeshi  Iman  Wan Jusoh  Wan Amizah  Tahir  M. M.  Foong  Loke Kok 《Natural Resources Research》2020,29(2):609-623

Natural Resources Research - Blasting is the predominant rock fragmentation technique in civil constructions, underground and surface mines. Flyrock is the unwanted throw of rock fragments during...  相似文献   

Determination of the Geopotential Scale Factor from TOPEX/POSEIDON Satellite Altimetry     

Burša  Milan  Raděj  Karel  Šima  Zdislav  True  Scott A.  Vatrt  Viliam 《Studia Geophysica et Geodaetica》1997,41(3):203-216

The geopotential scale factor R _o = GM/W _o (the GM geocentric gravitational constant adopted) and/or geoidal potential Wo have been determined on the basis of the first year's (Oct 92 – Dec 93) ERS-1/TOPEX/POSEIDON altimeter data and of the POCM 4B sea surface topography model: R _o °=(6 363 672.58°±0.05) m, W _o °=(62 636 855.8°±0.05)m ² s ^–2 . The 2°–°3 cm uncertainty in the altimeter calibration limits the actual accuracy of the solution. Monitoring dW _o /dt has been projected.  相似文献   

Acid-treated zeolite (clinoptilolite) and its potential to zinc removal from water sample     

J. Adinehvand  A. Shokuhi Rad  A. S. Tehrani 《International Journal of Environmental Science and Technology》2016,13(11):2705-2712

Zinc compounds are important group of pollutants which enter water flows from industrial factories sewage. In this research, use of both natural zeolite (clinoptilolite) and its sulfuric acid-modified form as a cheap adsorbent for removing zinc from its solutions has been investigated. The effect of acid concentration, contact duration, pH of solution, initial concentration of zinc, amount of adsorbent and its size was investigated. On average, the maximum adsorption amount is calculated to be 91.1 % with contact duration of 300 min. By increasing contact duration, more adsorption is achieved. Results show that if the more zeolite is used, the more adsorption is achieved. According to results, Langmuir and Freundlich isotherm models were investigated and the adsorption of zinc by modified zeolite was described by both models very well.  相似文献   

Assessment of seasonal characteristics of streamflow droughts under semiarid conditions     

Arash Modaresi Rad  Davar Khalili  Ali Akbar Kamgar-Haghighi  Shahrokh Zand-Parsa  Seyed Adib Banimahd 《Natural Hazards》2016,82(3):1541-1564

  相似文献   

Incompressible SPH simulation of landslide impulse-generated water waves     

Asghar Farhadi  Homayoun Emdad  Ebrahim Goshtasbi Rad 《Natural Hazards》2016,82(3):1779-1802

  相似文献   

Prediction of Vibration Velocity Generated in Mine Blasting Using Support Vector Regression Improved by Optimization Algorithms     

Yang  Haiqing  Nikafshan Rad  Hima  Hasanipanah  Mahdi  Bakhshandeh Amnieh  Hassan  Nekouie  Atefeh 《Natural Resources Research》2020,29(2):807-830

Natural Resources Research - Ground vibration generated from blasting is a detrimental side effect of the use of explosives to break the rock mass in mines. Therefore, accurately predicting ground...  相似文献