Gas well drilled through longwall mining abutment pillar could potentially face instability issue due to the strata deformation following longwall panel extraction. Therefore, it is imperative to adequately design the pillar size of a longwall mining in order to ensure the stability of the gas well penetrated longwall mining abutment pillar. In this paper, the determination of suitable pillar size for protecting gas well subjected to longwall mining operation was investigated. Two scenarios of longwall gateroad system including the three and four entry system with varying pillar sizes were assessed using numerical modelling approach. The results of this study indicate that the pillar geometry plays an important role on the vertical gas well stability. In addressing the suitable pillar size for the given case study considering three entry system, the suitable chain pillar and abutment pillar size were found to be 80 ft (24.4 m) wide by 120 ft (36.6 m) length and 104 ft (31.7 m) wide by 120 ft (36.6 m) length rib to rib, respectively. Whereas, if four entry system is used, the suitable chain pillar size is 48 ft (14.6) wide by 120 ft (36.6 m) length and the abutment pillar size is 104 ft (31.7 m) wide by 120 ft (36.6 m) length rib to rib. The proposed numerical modelling procedure presented in this paper can be a viable alternative and applied to other similar projects in order to determine an optimal pillar size for protecting gas well in longwall mining area.
相似文献Time is one of the often-neglected factors in the assessment of the erratic failure of shale rock. Laboratory-creep experiments showed that constant stress induces time-dependent failure in brittle shale. However, the microscopic reason for time-dependent deformation in shale is still unknown. In the current study, triaxial creep and recovery experiments showed that the brittle shale specimens exhibit viscoelastic and viscoplastic creep deformation at constant stress state. In addition, the X-ray computed tomography scan of Marcellus shale showed that the shale specimens contained significant volume of preexisting microcracks. The statistical correlation among permanent strain during the triaxial experiment and stress-induced change in the three-dimensional geometry of microcracks showed that the microcracking is the microscopic reason for viscoplastic creep deformation in shale. In addition to the time and level of constant differential stress, factors such as orientation of bedding planes and specimen heterogeneity also influence the nature of creep deformation.
相似文献