排序方式： 共有40条查询结果，搜索用时 31 毫秒
1.
A detailed fabric and microstructural analysis of the granitic mylonites was carried out on the southern side of Bes,parmak Mountain north of Selimiye (Milas). The mylonitic augen gneisses have?a blastomylonitic texture characterized by large retort-shape porphyroclasts or augen of feldspars, around which a more ductile, medium to fine-grained matrix of muscovite, biotite, quartz and feldspar is deflected. Feldspars behave in both plastic and brittle fashion, because size reduction occurs through grain boundary migration and/or subgrain rotation, and also through fracturing. Typical “core-and-mantle” structure, characterized by a large feldspar core surrounded by a mantle of fine recrystallized grains, is very characteristic. The majority of plagioclase twins obey the albite-twin law; however, the association with pericline-law twinning suggests that many of the twins are mechanical. Evidence of strain, such as deformation twins, bent or curved twins, undulatory extinction, deformation bands and kink bands occur characteristically in plagioclase. Myrmekite is ubiquitous at K-feldspar grain boundaries, most notably on the long sides of inequant grains parallel to the S-foliation direction, which invariably face the maximum finite shortening direction. Deformation of quartz in mylonitic augen gneisses commonly results in the development of core-and-mantle structure and “type-4” quartz ribbons of elongated, preferably oriented, newly recrystallized quartz aggregates suggesting a primary dynamic recrystallization. Undulatory extinction, deformation bands and lamellae are the strain-related features associated with quartz porphyroclasts. Micas, especially biotite, undergo internal deformation by bend gliding and kinking. Most of the micas are completely attenuated and aligned such that their (001) planes are subparallel or parallel to the margins of quartz ribbons and define the foliation in the rock. These microstructures of feldspars, quartz and mica in the mylonitic augen gneisses in this part of the southern Menderes Massif are broadly consistent with fabric development under upper-greenschist- to lower-amphibolite-facies conditions, rather than almandine–amphibolite facies, as was previously believed. This supports the previous contention of the authors that the protoliths of augen gneisses are younger granitoids and do not represent an exposed Precambrian Pan-African basement in the Menderes Massif. 相似文献
2.
3.
Northwestern Anatolia contains three main tectonic units: (a) the Pontide Zone in the north which consists mainly of the Gstanbul-Zonguldak Unit in the west and the BallLda<-Küre Unit in the east; (b) the Sakarya Zone (or Continent) in the south, which is juxtaposed against the Pontide Zone due to the closure of Paleo-Tethys prior to Late Jurassic time; and (c) the Armutlu-OvacLk Zone which appears to represent a tectonic mixture of both zones. These three major tectonic zones are presently bounded by the two branches of the North Anatolian Transform Fault. The two tectonic contacts follow older tectonic lineaments (the Western Pontide Fault) which formed during the development of the Armutlu-OvacLk Zone. Since the earliest Cretaceous, an overall extensional regime dominated the region. A transpressional tectonic regime of Coniacian/Santonian to Campanian age caused the welding of the Gstanbul-Zonguldak Unit to the Sakarya Zone by an oblique collision. In the Late Campanian, a transtensional tectonic regime developed, forming a new basin within the amalgamated tectonic mosaic. The different tectonic regimes in the region were caused by activity of the Western Pontide Fault. Most of the ophiolites within the Armutlu-OvacLk Zone belong to the Paleo-Tethyan and/or pre-Ordovician ophiolitic core of the Gstanbul-Zonguldak Unit. The Late Cretaceous ophiolites in the eastern parts of the Armutlu-OvacLk Zone were transported from Neo-Tethyan ophiolites farther east by left-lateral strike-slip faults along the Western Pontide Fault. There is insufficient evidence to indicate the presence of an ocean (Intra-Pontide Ocean) between the Gstanbul-Zonguldak Unit and the Sakarya Zone during Late Cretaceous time. 相似文献
4.
Erdin Bozkurt 《International Journal of Earth Sciences》2001,89(4):728-744
The central Menderes Massif (western Turkey) is characterized by an overall dome-shaped Alpine foliation pattern and a N-NNE-trending stretching lineation. A section through the southern flank of the central submassif along the northern margin of Büyük Menderes graben has been studied. There, asymmetric non-coaxial fabrics indicate that the submassif has experienced two distinct phases of Alpine deformation: a top-to-the N-NNE contractional phase and a top-to-the S-SSW extensional event. The former fabrics are coeval with a regional prograde Barrovian-type metamorphism at greenschist to upper-amphibolite facies conditions. This event, known as the main Menderes metamorphism, is thought to be the result of internal imbrication of the Menderes Massif rocks along south-verging thrust sheets during the collision of the Sakarya continent in the north and the Anatolide-Tauride platform in the south across the Gzmir-Ankara suture during the (?)Palaeocene-Eocene. Top-to-the S-SSW fabrics, represented by a well-developed ductile shear band foliation associated with inclined and/or curved foliation, asymmetric boudins, and cataclasites, were clearly superimposed on earlier contractional fabrics. These fabrics are interpreted to be related to a low-grade (greenschist?) retrogressive metamorphism and a continuum of deformation from ductile to brittle in the footwall rocks of a south-dipping, presently low-angle normal fault that accompanied Early Miocene orogenic collapse and continental extension in western Turkey. A similar tectono-metamorphic history has been documented for the northern flank of the dome along the southern margin of the Gediz graben with top-to-the N-NNE extensional fabrics. The exhumation of the central Menderes Massif can therefore be attributed to a model of symmetric gravity collapse of the previously thickened crust in the submassif area. The central submassif is thus interpreted as a piece of ductile lower-middle crust that was exhumed along two normal-sense shear zones with opposing vergence and may be regarded as a typical symmetrical metamorphic core complex. These relationships are consistent with previous models that the Miocene exhumation of the Menderes Massif and Cycladic Massif in the Aegean Sea was a result of bivergent extension. 相似文献
5.
Outlier trimming and homogeneity checking/correction were performed on the monthly precipitation time series of various lengths from 267 stations in Turkey. Outlier values are usually found during dry summer months, and are concentrated mostly over the southern parts of the country, where the dry period is most pronounced, implying natural extremes rather than wrong measurements. Homogeneity analysis was done using the Standard Normal Homogeneity Test, on an individual monthly basis, which led to many non‐testable series due to lack of reference stations, especially during summer months. Yet, remaining testable months were usually helpful for the assessment of homogenity, revealing a well distributed set of stations that proved to be homogeneous. There were still a number of stations which either could not be tested efficiently, or were classified as inhomogeneous. Lack of metadata is argued to be largely responsible for inefficient homogeneity testing. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
6.
In this study, the relationship between the hourly changes of the ionospheric critic frequency values of F2 layers in low latitudes and geomagnetic activity is examined by using statistical methods. The ionospheric critical frequency data has been taken from the Manila (121.1° E, 14.7° N) ionosonde station. In order to investigate the effect of sun activity on ionospheric critical frequency, the data of 1981 when the sun was active and of 1985 when the sun was less active has been used. According to the Granger causality test results, on 5 % significance level, a causality relationship from disturbance storm time (Dst) index values to ionospheric critical frequency values direction has been observed. However, a causality relationship from ionospheric critical frequency values to Dst values has not been observed. From the results of cause-and-effect analysis, it is evaluated that the effect of a shockwave occurring in geomagnetic activity on ionospheric critical frequency continues along 72 h, that is, geomagnetic activity has a long-term effect on ionospheric critical frequency. The response of ionospheric critical frequency to geomagnetic activity substantially depends on seasons. This response is more observed especially in equinox period when the sun is active and in winter months. The increase in geomagnetic activity causes ionospheric critical frequency to decrease in night hours and increase in day hours. The same relationship has not been observed exactly, though observed very little in winter months, for 1985 when the sun was less active. 相似文献
7.
The Menderes Massif, in western Anatolia, has been described as a lithological succession comprising a basal ‘Precambrian gneissic core of sedimentary origin’ overlain in sequence by ‘Palaeozoic schist’ and ‘Mesozoic-Cenozoic marble’ forming the envelope. The boundary between core and schist envelope was interpreted as a major unconformity, the ‘Supra-Pan-African unconformity’. By contrast, our field observations and geochemical data show that around the southern side of Besparmak Mountain, north of Selimiye (Milas), the protoliths of highly deformed, mylonitized augen gneisses are granitoid rocks intrusive into the adjacent Palaeozoic metasedimentary schists. The field relationships indicate the age of intrusion to be younger than late Permian and there is no evidence for the existence of either an exposed Precambrian basement or the ‘Supra-Pan-African unconformity’ in this sector of the Menderes Massif. 相似文献
8.
This paper reports findings of an experimental study conducted on replaceable links for steel eccentrically braced frames (EBFs). A replaceable link detail which is based on splicing the directly connected braces and the beam outside the link is proposed. This detail eliminates the need to use hydraulic jacks and flame cutting operations for replacement purposes. Performance of this proposed replaceable link was studied by conducting eight nearly full‐scale EBF tests under quasi‐static cyclic loading. The link length ratio, stiffening of the link, loading protocol, connection type, bolt pretension, gap size of splice connections, and demand‐to‐capacity ratios of members were considered as the prime variables. The specimens primarily showed two types of failure modes: link web fracture and fracture of the flange at the link‐to‐brace connection. No failures were observed at the splice connections indicating that the proposed replaceable link detail provides an excellent response. The inelastic rotation capacity provided by the replaceable links satisfied the requirements of the AISC Seismic Provisions for Structural Steel Buildings (AISC341–10). The overstrength factor of the links exceeded 2.0, which is larger than the value assumed for EBF links by design provisions. The high level of overstrength resulted in brace buckling in one of the specimens demonstrating the importance of overstrength factor used for EBF links. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
9.
Eccentrically braced frames (EBFs) can be repaired after a major earthquake by replacing the links. The link replacement is not a straightforward process and is influenced by the type of the link and the amount of residual frame deformations. The past decade has witnessed the development of different types of replaceable links such as end-plated links, web connected links, bolted flange and web spliced links, and collector beam and brace spliced links. All of the developed replaceable link details, except the web connected links, are not suitable for link replacement under residual frame drift. In this paper, a detachable replaceable link detail which is based on splicing the link at its mid-length is proposed. The detail is well suited for installation under residual frame drifts. In addition, the weight and size of the members to be transported and erected are reduced significantly, thereby facilitating the replacement procedure. Performance of this proposed replaceable link is studied by conducting six nearly full scale EBF tests under quasi-static cyclic loading. The link length ratio, type of end-plated mid-splice connection, and the amount of residual drift are considered as test variables. The test results revealed that the inelastic rotation capacity of the detachable replaceable links exceeds the requirements of the AISC Seismic Provisions for Structural Steel Buildings. No failures are observed in the end-plated mid-splice connections demonstrating the potential of the proposed details. The detachable replaceable links are investigated by numerical analysis as well to further validate their applicability and to develop design recommendations. 相似文献
10.
Sorption behavior of Lanaset Red (LR) G on lentil straw (LS) was studied as a function of particle size, adsorbent dose, initial pH value, initial dye concentration, and contact time. Sorption kinetics data was well described by logistic model. Modified logistic equation can be used to explain effects of initial dye concentrations and contact time on the sorption of LR G with high R2 value. Freundlich model was found to be excellent in representing the equilibrium data. Thermodynamic parameters like free energy (ΔG0), enthalpy (ΔH0), and entropy (ΔS0) were calculated by the use of Langmuir constant. Thermodynamic data showed that the sorption processes were spontaneous and endothermic in nature. Desorption process suggested that strong binding and weak interactions could be formed between adsorbent surface and dye molecules. Results revealed that LS has a remarkable potential for the sorption of LR G. 相似文献