排序方式： 共有8条查询结果，搜索用时 640 毫秒
1
1.
Ciancimino Andrea Anastasopoulos Ioannis Foti Sebastiano Gajo Alessandro 《Acta Geotechnica》2022,17(9):3697-3717
Foundation scour can have a detrimental effect on the performance of bridge piers, inducing a significant reduction of the lateral capacity of the footing and accumulation of permanent settlement and rotation. Although the hydraulic processes responsible for foundation scour are nowadays well known, predicting their mechanical consequences is still challenging. Indeed, its impact on the failure mechanisms developing around the foundation has not been fully investigated. In this paper, numerical simulations are performed to study the vertical and lateral response of a scoured bridge pier founded on a cylindrical caisson foundation embedded in a layer of dense sand. The sand stress–strain behaviour is reproduced by employing the Severn-Trent model. The constitutive model is firstly calibrated on a set of soil element tests, including drained and undrained monotonic triaxial tests and resonant column tests. The calibration procedure is implemented considering the stress and strain nonuniformities within the samples, by simulating the laboratory tests as boundary value problems. The numerical model is then validated against the results of centrifuge tests. The results of the simulations are in good agreement with the experimental results in terms of foundation capacity and settlement accumulation. Moreover, the model can predict the effects of local and general scour. The numerical analyses also highlight the impact of scouring on the failure mechanisms, revealing that the soil resistance depends on the hydraulic scenario.
相似文献2.
This paper explores the possibility of using well-accepted concepts—Mohr-Coulomb-like strength criterion, critical state, existence of a small strain elastic region, hyperbolic relationship for representing global plastic stress–strain behaviour, dependence of strength on state parameter and flow rules derived from the Cam-Clay Model—to represent the general multiaxial stress–strain behaviour of granular materials over the full range of void ratios and stress level (neglecting grain crushing). The result is a simple model based on bounding surface and kinematic hardening plasticity, which is based on a single set of constitutive parameters, namely two for the elastic behaviour plus eight for the plastic behaviour, which all have a clear and easily understandable physical meaning. In order to assist the convenience of the numerical implementation, the model is defined in a ‘normalized’ stress space in which the stress–strain behaviour does not undergo any strain softening and so certain potential numerical difficulties are avoided. In the first part the multiaxial formulation of the model is described in detail, using appropriate mixed invariants, which rationally combine stress history and stress. The model simulations are compared with some experimental results for tests on granular soils along stress paths lying outside the triaxial plane over a wide range of densities and mean stresses, using constitutive parameters calibrated using triaxial tests. Furthermore, the study is extended to the analysis of the effects induced by the different shapes of the yield and bounding surfaces, revealing the different role played by the size and the curvature of the bounding surface on the simulated behaviour of completely stress- and partly strain-driven tests. Copyright © 1999 John Wiley & Sons, Ltd. 相似文献
3.
The experimental evidence that cohesive and granular soils possess an elastic range in which the elasticity is both nonlinear and anisotropic—with stiffness and directional characteristics strongly dependent on stress and plastic strain (the so‐called ‘stress history’)—is given a formulation based on hyperelasticity. This is accomplished within the framework of elastoplastic coupling, through a new proposal of elastic potentials and a combined use of a plastic‐strain‐dependent fabric tensor and nonlinear elasticity. When used within a simple elastoplastic framework, the proposed model is shown to yield very accurate simulations of the evolution of elastic properties from initial directional stiffening to final isotropic degradation. Within the proposed constitutive framework, it is shown that predictions of shear band formation and evolution become closer to the existing experimental results, when compared to modelling in which elasticity does not evolve. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
4.
5.
A. Gajo 《国际地质力学数值与分析法杂志》2010,34(2):111-134
Experimental evidence shows that soil stiffness at very small strains is strongly anisotropic and depends on the stress level and void ratio. In particular, stiffness anisotropy varies considerably in sand when subjected to cyclic loading, following the stress cycles applied. To model this behaviour, an innovative hyperelastic formulation based on the elastoplastic coupling is incorporated in a new kinematic hardening elastoplastic model. The proposed hyperelastic–plastic model is the first to be capable of correctly simulating all aspects of the small‐strain behaviour of granular materials subjected to monotonic and cyclic loads. This hyperelastic formulation is generally applicable to any elastoplastic model. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
6.
The motions of fluid and solid phases in saturated porous media are coupled by inertial, viscous and mechanical interactions as described by Biot's equations. A one-dimensional exact analytical solution of the Biot's equations for the completely general solution of the transient problem in saturated, linear, elastic, porous media is presented. The problem is solved by using the Fourier series. The transient response of porous media is shown for typical material properties of a natural granular deposit and for different degrees of viscous coupling. The analytical results show the mechanics of dispersive wave propagation in saturated porous media and they should provide a useful comparison term for the existing numerical solution methods. 相似文献
7.
Accurate modeling of the time-dependent behavior of geomaterials is of great importance in a number of engineering structures interacting with soft, highly compressible clay layers or with organic clays and peats. In this work, a uniaxial constitutive model, based on Perzyna’s overstress theory and directly extendible to multiaxial stress conditions, is formulated and validated. The proposed constitutive approach essentially has three innovative aspects. The first concerns the implementation of two viscoplastic mechanisms within Perzyna’s theory in order to distinguish between short-term (quasi-instantaneous) and long-term plastic responses. Similarly, elastic response is simulated by combining an instantaneous and a long-term viscous deformation mechanism. The second innovative aspect concerns the use of a bespoke logarithmic law for viscous effects, which has never been used before to simulate delayed soil behavior (as far as the authors are aware). The third concerns the model’s extensive validation by simulating a number of different laboratory test results, including conventional and unconventional oedometer tests with small and large load increments/decrements and wide and narrow loading/unloading cycles, constant rates of stress and strain tests, and oedometer tests performed in a Rowe consolidation cell with measurement of pore pressure dissipation. 相似文献
8.
Recent observations of failure and damage of buildings and structures under seismic action has led to an increasing interest for an in-depth analysis of the vertical component of site ground motion. In particular, when dealing with saturated soils, the current engineering practice does not usually go beyond the simplified – formulation of the Biot's equations describing the coupled hydro-mechanical behaviour, thus neglecting some terms of fluid inertial forces, despite the presence of more refined formulations, for example, the – formulation. Therefore, a theoretical and numerical validation of the – formulation as compared with the – formulation is proposed in this work, where the numerical simulations are compared with the analytical solution for the – formulation, which is also derived and illustrated in this text. The comparison between the two formulations and the analytical solution is provided for different levels of permeability and dynamic actions, which are representative of a wide scenario of site ground properties and seismic hazard in the vertical direction. In particular, the soil response is analysed in terms of acceleration and pore pressure time history, frequency content, acceleration response spectrum, and amplification ratio of acceleration. This study extends the discussion of the limits of applicability of the – formulation with respect to the rigorous solution of Biot's equations (obtained here with – formulation) to the context of a complex dynamic regime provided by the vertical components of real earthquake records, and paves the way for further investigations. 相似文献
1