A cavity expansion–based solution is proposed in this paper for the interpretation of CPTu data under a partially drained condition. Variations of the normalized cone tip resistance, cone factor, and undrained-drained resistance ratio are examined with different initial specific volume and overconsolidation ratio, based on the exact solutions of both undrained and drained cavity expansion in CASM, which is a unified state parameter model for clay and sand. A drainage index is proposed to represent the partially drained condition, and the critical state after expansion and stress paths of cavity expansion are therefore predicted by estimating a virtual plastic region and assuming a drainage-index–based mapping technique. The stress paths and distributions of stresses and specific volume are investigated for different values of drainage index, which are also related to the penetration velocity with comparisons of experimental data and numerical results. The subsequent consolidation after penetration is thus predicted with the assumption of constant deviatoric stress during dissipation of the excess pore pressure. Both spherical and cylindrical consolidations are compared for dissipation around the cone tip and the probe shaft, respectively. The effects of overconsolidation ratio on the stress paths and the distributions of excess pore pressure and specific volume are then thoroughly investigated. The proposed solution and the findings would contribute to the interpretation of CPTu tests under a random drained condition, as well as the analysis of pile installation and the subsequent consolidation. 相似文献
Wet granular materials are three-dimensionally simulated by the discrete element method with water bridges incorporated between particles. The water bridges are simplified as toroidal shapes, and the matric suction is constantly maintained in the material. A comparison with experimental tests in the literature indicates that the toroidal shape approximation may be one of the best choices with high practicability and decent accuracy. Mechanical behaviours of wet granular materials are studied by triaxial tests. Effects of particle size distributions and void ratios are investigated systematically in this study. The hydraulic limit of the pendular state is also discussed. It gives the capillary cohesion function which is not only determined by the degree of saturation but also positively correlated to relative density and particle size polydispersity and inversely proportional to mean particle size. Furthermore, the capillary strengthening effect is also analysed microscopically in aid of the Stress–Force–Fabric relationship, mainly in fabric anisotropy, coordination number and stress transmission pattern, which revealed the micro-mechanisms of the additional effective stress induced by capillary effect. 相似文献
This paper ascertains the reasons for the numerical problems when the yield vertex non-coaxial model is implemented in the finite element analysis to predict the behaviour of complicated geotechnical engineering problems. The numerical problem, reflected in the failure of convergence in the non-linear solutions in ABAQUS, is likely to happen when a smaller non-coaxial plastic modulus is used. It is found that a large non-coaxial influence at the start of elastoplastic loading, which causes the predominance of non-coaxial plastic strain rate over the coaxial plastic strain rate in stress–strain responses, is the reason for the numerical problem. The original yield vertex non-coaxial model is modified to overcome the numerical problem. Instead of a constant non-coaxial plastic modulus in the original yield vertex non-coaxial model, the non-coaxial modulus is made a function of cumulative deviatoric plastic strain. It shows that the modified non-coaxial model retains the functions of the original non-coaxial model. Meanwhile, it overcomes the non-convergence problem when a smaller non-coaxial plastic modulus, representing a larger non-coaxial influence, is used. 相似文献
The yield vertex non-coaxial model is different from classical elastoplastic models, in that there is an additional plastic strain rate tangential to yield surfaces, as well as the plastic strain rate normal to yield surfaces, when orientations of principal stress change. This feature raises concerns on its finite element implementations. In nonlinear finite element numerical iterations, a large tangential plastic strain rate is likely to make the trial total strain rate direct inside a yield surface, which entails convergence difficulty. Some modifications are introduced on the non-coaxial model itself to make numerical convergence easier in the work published in Yang and Yu (2010) [20]. This paper is an extension of the previous work. Instead of modifying the non-coaxial model itself, this paper concerns the use of finite element explicit procedure, which is suitable for highly discontinuous problems. The simulations of shallow foundation load-settlement responses indicate that the finite element explicit procedure, assisted with a robust and explicit automatic substepping integration scheme of the non-coaxial model, does not encounter numerical difficulty. In addition, the overall trends of implicit and explicit simulations are similar. 相似文献
This paper presents analytical elastic-plastic solutions for static stress loading analysis and quasi-static expansion analysis of a cylindrical cavity in Tresca materials, considering biaxial far-field stresses and shear stresses along the inner cavity wall. The two-dimensional static stress solution is obtained by assuming that the plastic zone is statically determinate and using the complex variable theory in the elastic analysis. A rigorous conformal mapping function is constructed, which predicts that the elastic-plastic boundary is in an elliptic shape under biaxial in situ stresses, and the range of the plastic zone extends with increasing internal shear stresses. The major axis of the elliptical elastic-plastic boundary coincides with the direction of the maximum far-field compression stress. Furthermore, considering the internal shear stresses, an analytical large-strain displacement solution is derived for continuous cavity expansion analysis in a hydrostatic initial stress filed. Based on the derived analytical stress and displacement solutions, the influence of the internal shear stresses on the quasi-static cavity expansion process is studied. It is shown that additional shear stresses could reduce the required normal expansion pressure to a certain degree, which partly explains the great reduction of the axial soil resistance due to rotations in rotating cone penetration tests. In addition, through additionally considering the potential influences of biaxial in situ stresses and shear stresses generated around the borehole during drillings, an improved cavity expansion approach for estimating the maximum allowable mud pressure of horizontal directional drillings (HDDs) in undrained clays is proposed and validated. 相似文献
This paper proposes a semi-analytical solution of undrained cylindrical cavity expansion in anisotropic soils with both isotropic and frictional destructuration. The rigorous derivation based on the general form of the SANICLAY model with destructuration is provided following a standardized solving procedure, and the features of anisotropy and structuration are then invoked in the cavity expansion solution by adopting the non-associated hierarchical model. Cavity expansion tests in both structured and unstructured clays with various overconsolidation ratio are conducted to investigate the evolutions of effective stresses, excess pore pressure, anisotropic parameters and structuration factors during cylindrical expansion. The results show that the effective stresses at the cavity wall are lower after expansion and the cavity excess pore pressure is oppositely higher in structured clays with slightly smaller plastic regions. The evolutions of anisotropy for structured clays appear to follow similar patterns to unstructured cases, whereas the degree of anisotropy is further developed with gradual loss of inter-particle bonds. Finally, the proposed solution is applied to predict the limit pressure of pressuremeter tests in Bothkennar clay, showing its ability for interpretation of in situ testing data in natural structured clays.
Rotational shear is the type of loading path where samples are subjected to cyclic rotation of principal stress directions while the magnitudes of principal stresses are maintained constant. This paper presents results from an experimental investigation on the drained deformation behaviour of saturated sand in rotational shear conducted in a hollow cylinder apparatus. Two types of granular materials, Leighton Buzzard sand and glass beads are tested. A range of influential factors are investigated including the material density, the deviatoric stress level, and the intermediate principal stress. It is observed that the volumetric strain during rotational shear is mainly contractive and most of strains are generated during the first 20 cycles. The mechanical behaviour of sand under rotational shear is generally non-coaxial, i.e., there is no coincidence between the principal axes of stress and incremental strain, and the variation of the non-coaxiality shows a periodic trend during the tests. The stress ratio has a significant effect on soil response in rotational shear. The larger the stress ratio, the more contractive behaviour and the lower degree of non-coaxiality are induced. The test also demonstrates that the effect of the intermediate principal stress, material density and particle shape on the results is pronounced. 相似文献
This paper presents a fabric tensor-based bounding surface model accounting for anisotropic behaviour (e.g. the dependency of peak strength on loading direction and non-coaxial deformation) of granular materials. This model is developed based on a well-calibrated isotropic bounding surface model. The yield surface is modified by incorporating the back stress which is proportional to a contact normal-based fabric tensor for characterising fabric anisotropy. The evolution law of the fabric tensor, which is dependent on both rates of the stress ratio and the plastic strain, rules that the material fabric tends to align with the loading direction and evolves towards a unique critical state fabric tensor under monotonic shearing. The incorporation of the evolution law leads to a rotational hardening of the yield surface. The anisotropic critical state is assumed to be independent of the initial values of void ratio and fabric tensor. The critical state fabric tensor has the same intermediate stress ratio (i.e. b value) and principal directions as the critical state stress tensor. A non-associated flow rule in the deviatoric plane is adopted, which is able to predict the non-coaxial flow naturally. The stress–strain relation and fabric evolution of model predictions show a satisfactory agreement with DEM simulation results under monotonic shearing with different loading directions. The model is also validated by comparing with laboratory test results of Leighton Buzzard sand and Toyoura sand under various loading paths. The comparison results demonstrate encouraging applicability of the model for predicting the anisotropic behaviour of granular materials.
A coupled elastic–plastic finite element analysis based on simplified consolidation theory for unsaturated soils is used to investigate the coupling processes of water infiltration and deformation. By introducing a reduced suction and an elastic–plastic constitutive equation for the soil skeleton, the simplified consolidation theory for unsaturated soils is incorporated into an in-house finite element code. Using the proposed numerical method, the generation of pore water pressure and development of deformation can be simulated under evaporation or rainfall infiltration conditions. Through a parametric study and comparison with the test results, the proposed method is found to describe well the characteristics during water evaporation/infiltration into unsaturated soils. Finally, an unsaturated soil slope with water infiltration is analyzed in detail to investigate the development of the displacement and generation of pore water pressure. 相似文献
