排序方式： 共有63条查询结果，搜索用时 78 毫秒
1.
Daniel Bernard Jamal El Khattabi Emilie Lefevre Hani Serhal Sabine Bastin-Lacherez Isam Shahrour 《Environmental Geology》2008,53(5):1129-1138
In the north of France, high registers of nickel are sometimes recorded within the chalk aquifer. In a confined context, the
presence of pyrite in the covering clays or in the marcasite nodules encrusted in the clay may constitute a natural source
of trace metals. With an objective of sanitary control, the limits of chemical contents regulating the quality of water destined
for human consumption have been lowered by the European Framework Directive in the field of water policy (2000/60/EC). As
a result, nickel limits have been reduced from 50 to 20 μg/l. The analyses, carried out on three water catchment fields in
our area of study, were centred on variable parameters (Eh, O2(d), pH, Conductivity, T°), major elements (SO4, NO3) and metals (Fe, Ni, Mn, Co). The acquired data enabled us to identify from one hand, the conditions which are presented
within the site, special thanks to the evolution of nitrate and iron contents and on the other hand, the natural origin (geological)
of nickel for two of the three sites studied based essentially on the evaluation of the Nickel/Cobalt ratio. Thus, on the
first site, the evolution of nickel content and nitrate content showed the influence of the phenomenon of denitrification
on the re-mobilisation of the nickel. Whereas on the second site, a high variation of total iron content and oxygen dissolved
in solution highlighted a particular phenomenon of oxidation of the pyrite through molecular oxygen. Finally, the correlation
with the sulphates clearly showed behaviour of the nickel, once released, that was entirely dependent on the phenomenon of
adsorption on the iron and manganese hydroxides. 相似文献
2.
World-wide synthetic tide parameters for gravity and vertical and horizontal displacements 总被引：3，自引：0，他引：3
The response of the Earth’s crust to the direct effect of lunisolar gravitational forcing is known as the body tide. The body tide is superimposed by surface-loading forces due to the pressure of the periodically varying ocean tide acting on the Earth, called ocean tide loading (OTL). Both body tide and OTL can be decomposed into components of the same frequency known as tidal parameters. However, OTL is more complicated than body tides because of the dynamic effects of the ocean. Estimating OTL requires a model of the ocean tides and knowledge of the elastic properties of the solid Earth. Thus, synthetic tide parameters (amplitude factors and phase leads) have been developed here on a world-wide grid for gravity and positional displacements. The body tide contributions were added to the oceanic contribution to provide the Earth tide response. The accuracy and reliability of the synthetic tidal parameters have been estimated by comparing observed gravity and vertical-displacement tide parameters with those interpolated from our synthetic model, which shows good agreement. Tests also indicate that the synthetic tide parameters provide realistic gravimetric and displacements for practical use in tidal prediction. 相似文献
3.
4.
Hani N. Khoury 《Arabian Journal of Geosciences》2018,11(4):72
The Azraq basin (the Badia region in NE-Jordan) is rich in its industrial rocks and minerals. Most of the commodities are concentrated in one area, which is the Azraq depression (El-Qa’). The climatic changes (wet and dry) of Azraq closed lake contributed in the formation of industrial rocks and minerals in the El-Qa’. Basalt, pyroclastics, zeolites, diatomaceous earth, bentonite, palgorskite, porcelanite, saline brines, chalk, limestone, and gypsum are the potential industrial commodities. The basaltic rocks are of high alkalis content and good homogeneity and are of good potential use in constructions and cast basalt. The scoriaceous pyroclastic material proved to be of excellent properties for use as lightweight aggregates, cultivation purposes, and for the production of pozzolanic cement. Smectite-rich beds (bentonite) from Ein El Badia could be used as binder, absorbent, and additives for feeding farm animals. Palygorskite is potential for use in drilling mud, paint, pharmaceuticals, and as a filtering medium. The diatomaceous earth deposits are Moler type and could be used as filter aid and absorbent. Zeolites are efficient for agricultural purposes, animal waste, and wastewater treatment plants. Saline brine is exploited in the Azraq mudflat area for table salt. Porcelanite could be used as an absorbent of hazardous elements, abrasive, and filler. The softness and high purity of chalk enable its use as filler and in the lime production. The large limestone concretions are of high quality for use as a building stone. Gypsum (gypcrete) could be used after the removal of the undesired chert impurities. The Badia region is a highly potential area for future exploration and mining industry in a manner that achieves the required outcomes and minimizes impacts on ecosystems. 相似文献
5.
L.?DjabriEmail author A.?Hani R.?Laouar J.?Mania J.?Mudry A.?Louhi 《Environmental Geology》2003,44(6):738-744
In north-eastern Algeria, the Seybouse River is an important source of water used mainly for irrigation of large agricultural areas extending from the Guelma region to Annaba city. Industrial activities in this region contribute substantial water pollution to the river and the groundwater. Based on the different sources of pollution, mapping of areas vulnerable to groundwater pollution has been accomplished by combining land use and data on groundwater levels. The resulting maps show that the most vulnerable areas are those with large industrial activities—in Meboudja, Bouchegouf and Guelma. Infiltration and runoff contribute to pollution, and the highest infiltration rate is generally observed in areas of agricultural and industrial activities. Pollution of the aquifers in this area is of concern. Mountains, such as the Edough and Gelaat Bou Sbaa, contribute high runoff that carries pollutants towards the groundwater. 相似文献
6.
Matthieu Ferry Mustapha Meghraoui Najib Abou Karaki Masdouq Al-Taj Hani Amoush Salman Al-Dhaisat Majdi Barjous 《Earth and Planetary Science Letters》2007,260(3-4):394-406
We investigate the late Quaternary active deformation along the Jordan Valley segment of the left-lateral Dead Sea Fault and provide new insights on the behaviour of major continental faults. The 110-km-long fault segment shows systematic offsets of drainage systems surveyed at three sites along its southern section. The isotopic dating of six paleoclimatic events yields a precise chronology for the onset of six generations of gully incisions at 47.5 ka BP, 37.5 ka BP, 13 ka BP, 9 ka BP, 7 ka BP, and 5 ka BP. Additionally, detailed mapping and reconstructions provide cumulative displacements for 20 dated incisions along the fault trace. The individual amounts of cumulative slip consistently fall into six distinct classes. This yields: i) an average constant slip rate of 4.7 to 5.1 mm/yr for the last 47.5 kyr and ii) a variable slip rate ranging from 3.5 mm/yr to 11 mm/yr over 2-kyr- to 24-kyr-long intervals. Taking into account that the last large earthquake occurred in AD 1033, we infer 3.5 to 5 m of present-day slip deficit which corresponds to a Mw 7.4 earthquake along the Jordan Valley fault segment. The timing of cumulative offsets reveals slip rate variations critical to our understanding of the slip deficit and seismic cycle along major continental faults. 相似文献
7.
The groundwater flow in a fissured chalky environment at the northern border of the Paris Basin depends on several geological and hydrogeological parameters. Although the studied sector of the basin presents a homogeneous rock type, it is affected by a fracture network. In this type of environment, in which the permeability is low, the groundwater flow displays significant disruption, which is localized in the Fruges region (northern France). The interconnection of the discontinuities (network of fault and/or joints) is reliant on the structural control of groundwater flow through increases in the hydraulic connection between the unsaturated and the saturated zone. The methodology developed herein makes use of microstructural and regional analysis of the fracture patterns, and allowed consideration of the piezometric variations of the chalk aquifer during periods of low and high groundwater levels (April and October 2001) and a diagraphic representation of the estimated physical parameters (electrical resistivity). This enabled us to construct a ‘flow structure’ conceptual model in which we identify two types of faults: tight walls and flow paths that control the piezometric heads and the flow rate. Model validation was carried out on a similar sector. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
8.
Reyad A. Al Dwairi Khalil M. Ibrahim Hani N. Khoury 《Environmental Earth Sciences》2014,71(12):5071-5078
Characterization of zeolitic tuff from Jabal Hannoun (HN) and Mukawir (MR) was carried out to examine the ability of using low-cost natural materials in domestic wastewater treatment. The grain size between 0.3 and 1 mm (0.3–1 mm) of the HN and MR has the highest total zeolite grade (faujasite–phillipsite and phillipsite–chabazite) and suitable cation exchange capacity. They were used as fixed-bed ion exchangers and adsorbents. The zeolitic tuff efficiently removed the organic and nitrogen compounds, Pb and Zn from the effluent. One bed volume (1 BV) of the zeolitic tuff is capable to remove up to 95 % of total organic carbon form 500 BV of the effluent. The removal percent of total nitrogen by HN and MR is close to 95 and 90 %, respectively. The zeolitic tuff has an excellent efficiency to remove Pb and Zn from the effluent. 1 BV of HN completely cleans Zn and Pb from 680 and 730 BV of the effluent, respectively, whereas 1 BV of MR is able to clean completely Zn and Pb from 500 and 685 BV of the effluent, respectively. The greater performance of the HN compared with the MR may be explained by its higher zeolites grade and presence of faujasite. 相似文献
9.
Hassan Mohamed AbdelazimNegm Mahmoud Salah Kazuo Nadaoka Mohamed Zahran 《Arabian Journal of Geosciences》2017,10(2):42
Bathymetric information for shallow coastal/lake areas is essential for hydrological engineering applications such as sedimentary processes and coastal studies. Remotely sensed imagery is considered a time-effective, low-cost, and wide-coverage solution for bathymetric measurements. This study assesses the performance of three proposed empirical models for bathymetry calculations in three different areas: Alexandria port, Egypt, as an example of a low-turbidity deep water area with silt-sand bottom cover and a depth range of 10.5 m; the Lake Nubia entrance zone, Sudan, which is a highly turbid, unstable, clay bottom area with water depths to 6 m; and Shiraho, Ishigaki Island, Japan, a coral reef area with varied depths ranging up to 14 m. The proposed models are the ensemble regression tree-fitting algorithm using bagging (BAG), ensemble regression tree-fitting algorithm of least squares boosting (LSB), and support vector regression algorithm (SVR). Data from Landsat 8 and Spot 6 satellite images were used to assess the performance of the proposed models. The three models were used to obtain bathymetric maps using the reflectance of green, red, blue/red, and green/red band ratios. The results were compared with corresponding results yielded by two conventional empirical methods, the neural network (NN) and the Lyzenga generalised linear model (GLM). Compared with echosounder data, BAG, LSB, and SVR results demonstrate higher accuracy ranges from 0.04 to 0.35 m more than Lyzenga GLM. The BAG algorithm, producing the most accurate results, proved to be the preferable algorithm for bathymetry calculation. 相似文献
10.
