Todorokite formation in seawater by microbial mediation     

Noburu Takematsu  Hiroo Kusakabe  Yoshio Sato  Shiro Okabe 《Journal of Oceanography》1988,44(5):235-243

Microbial manganese oxidation in seawater was carried out in enrichment cultures which were obtained from the seawater supply system at the Marine Science Museum, Tokai University (Shimizu-shi, Japan). The manganese oxide formed was well-crystallized todorokite. The major element composition was within the range of marine manganese concretions and the O/Mn molar ratio was 1.8. The conditions for formation of manganese oxide minerals in marine environments are discussed on the basis of these results.  相似文献   

Metal-organic complexes in seawater pumped up from under the ground     

Noburu Takematsu  Yoshio Sato  Shiro Okabe 《Journal of Oceanography》1983,39(6):305-309

Metal-organic complexes of transition elements removed by Amberlite XAD-2 resin from seawater pumped up from under the ground were determined. The proportions of iron, copper and zinc retained on the resin to dissolved forms of these metals were about 70, 40 and 5%, respectively, while manganese, cobalt and nickel were not retained on the resin. These results suggest that although iron may be retained in colloidal form, a significant fraction of copper is present in some organic form(s).  相似文献   

Introduction to Special Section: Kuroshio Observation, State Estimation and Prediction     

Shiro Imawaki  Hiroshi Ichikawa  Motoyoshi Ikeda  Atsuhiko Isobe  Masafumi Kamachi 《Journal of Oceanography》2004,60(2):265-268

  相似文献   

Detecting fluctuations of the Kuroshio axis south of Japan using TOPEX/POSEIDON altimeter data   总被引：1，自引：0，他引：1  

Shiro Imawaki  Mayumi Gotoh  Hiroyuki Yoritaka  Noriya Yoshioka  Atsunobu Misumi 《Journal of Oceanography》1996,52(1):69-92

Sea surface dynamic topography (SSDT) can be divided into temporal mean SSDT and fluctuation SSDT. The former is approximated with a climatological mean SSDT and the latter is derived from satellite altimetry data, to give an approximated total SSDT (called a composite SSDT). The method is applied to detecting fluctuations of the Kuroshio axis south of Japan using TOPEX/POSEIDON altimeter data from the first year mission in 1992–1993. The fluctuation SSDT averaged over a wide area south of Japan clearly shows an annual cycle with an amplitude of about 15 cm. Temporal changes of SSDT along a subsatellite track crossing the Kuroshio compare moderately well with those estimated from repeated hydrographic observations, although there is a discrepancy of unknown origin. The composite SSDT also compares well with SSDT estimated from the same hydrographic data. Horizontal distribution of the surface geostrophic velocity component normal to subsatellite tracks is derived every ten days from the composite SSDT. Most locations of estimated strong eastward geostrophic velocities coincide well with locations of the Kuroshio axis determined every 15 days fromin situ surface velocity measurements on various vessels; for example, a fairly large meander of the Kuroshio south of Honshu is clearly detected. It is concluded that the composite SSDT can be used reliably to detect fluctuations of the Kuroshio axis south of Japan.  相似文献   

Fluctuation of the sea surface dynamic topography southeast of Japan as estimated from Seasat altimetry data     

Kaoru Ichikawa  Shiro Imawaki 《Journal of Oceanography》1992,48(2):155-177

The sea surface dynamic topography (the sea surface height relative to the geoid; hereafter abbreviated SSDT) can be divided into the temporal mean SSDT and the fluctuation SSDT around the mean. We use the optimal interpolation method to reduce the satellite radial orbit error and estimate the fluctuation SSDT southeast of Japan from Seasat altimetry data during the 17-day near-repeat mission. The fluctuation SSDT is further combined with the mean geopotential anomalies estimated from hydrographic data during the Seasat mission in order to give the approximated total SSDT, called here the composite SSDT (the approximated mean plus fluctuation SSDT's). The fluctuation SSDT is in accord with the low-frequency sea-level fluctuation recorded at tide gauge stations in the Japanese islands. The composite SSDT describes thoroughly variations of the location of the Kuroshio axis south of Japan determined on the basis of the GEK (Geomagnetic Electro-Kinematograph) surface velocities and the horizontal temperature distribution. The composite SSDT also agrees with oceanic variations east of Japan found in the temperature distribution at the depth of 200 m. These results confirm that the SSDT derived from altimetry data can provide fairly precise synoptic views of low-frequency oceanic phenomena.  相似文献   

Uniaxial compression and tension tests of anthracite and loading rate dependence of peak strength   总被引：2，自引：0，他引：2  

S. Okubo  K. Fukui  Qi Qingxin 《International Journal of Coal Geology》2006,68(3-4):196-204

The mechanical characteristics of coal under uniaxial compressive stress and uniaxial tensile stress are key factors in investigations of the stability of galleries and coal faces, and are vital considerations for the efficient design of coalmines, disaster prevention, and environmental preservation. These mechanical characteristics have long been a topic of research, but remain insufficiently understood. In this study we performed uniaxial compression tests and uniaxial tension tests on coal, with particular attention to two concerns. The first was to measure the loading rate dependence of the peak strength of coal. Coal shows high sample-to-sample scatter in strength; test methods that are successful in comparatively homogeneous rock types cannot be used for coal. We therefore used an alternative test method that was recently developed by the authors. Anthracite samples were subjected to alternating slow and fast strain rates. Measured variations in stress during this process were used to estimate the loading rate dependence of peak strength. The second objective was to obtain complete stress–strain curves for coal under uniaxial tensile stress. It is difficult to hold samples secure during a tensile test; consequently, such curves have yet to be obtained. This study presents a successful application of the authors' method to the analysis of coal samples, yielding a complete stress–strain curve under tensile stress. The two methods presented here hold promise for application not only to anthracite but also to a wide variety of coals. It is possible to derive the values of the constants used in constitutive equations from the obtained experimental results. Once these equations are determined, they can be incorporated into finite-element software to investigate various time-dependent behaviors of coal and aid in the efficient design of coalmines and the prevention of subsidence and mine disasters.  相似文献   

Large-scale penetration test using a drop hammer     

S. Okubo  K. Fukui  J. Kawakami 《Rock Mechanics and Rock Engineering》1997,30(2):113-118

  相似文献   

Outline of the Great Hanshin earthquake, Japan 1995     

Takashi Okimura  Shiro Takada  Teng Hye Koid 《Natural Hazards》1996,14(1):39-71

  相似文献   

Electromagnetic Radiation from Rock During Uniaxial Compression Testing: The Effects of Rock Characteristics and Test Conditions   总被引：3，自引：0，他引：3  

K. Fukui  S. Okubo  T. Terashima 《Rock Mechanics and Rock Engineering》2005,38(5):411-423

  相似文献   

Kinematic analysis of sinistral cataclastic shear zones along the northern margin of the Mino Belt, central Japan   总被引：1，自引：0，他引：1  

Masakazu Niwa  Kazuhiro Tsukada  Shiro Tanaka 《Journal of Asian Earth Sciences》2005,24(6):787

In this paper, cataclastic shear zones along the northern margin of the Mino Belt, central Japan are described, and the significance of the shearing in the tectonic evolution of SW Japan is examined. The Mino Belt in SW Japan is composed of accretionary complexes of Jurassic to Early Cretaceous age. Field investigation revealed that remarkable cataclastic shear zones trending east to northeast run along the northern margin of the Mino Belt. Closely spaced cleavage is developed in these shear zones. Lineation on the cleavage plunges at shallow to moderate angles. Deformation structures (e.g. composite planar fabric and asymmetric structure of clasts) in the sheared rocks clearly indicate a sinistral sense of shear. The shearing ceased by latest Cretaceous time, because the sheared rocks are overlain by unsheared Upper Cretaceous volcanic rocks. The sinistral shearing may be closely related to Cretaceous sinistral movement along the eastern margin of Asia. Sinistral shearing along the northern margin of the Mino Belt can be considered as a key for re-examining the tectonic development of SW Japan.  相似文献