Effects of the geometry of two‐dimensional fractures on their hydraulic aperture and on the validity of the local cubic law          下载免费PDF全文

Ahmad Hajjar  Luc Scholtès  Constantin Oltéan  Michel Antoine Buès 《水文研究》2018,32(16):2510-2525

Flow through rough fractures is investigated numerically in order to assess the validity of the local cubic law for different fracture geometries. Two‐dimensional channels with sinusoidal walls having different geometrical properties defined by the aperture, the amplitude, and the wavelength of the walls' corrugations, the corrugations asymmetry, and the phase shift between the two walls are considered to represent different fracture geometries. First, it is analytically shown that the hydraulic aperture clearly deviates from the mean aperture when the walls' roughness, the phase shift, and/or the asymmetry between the fracture walls are relatively high. The continuity and the Navier–Stokes equations are then solved by means of the finite element method and the numerical solutions compared to the theoretical predictions of the local cubic law. Reynolds numbers ranging from 0.066 to 66.66 are investigated so as to focus more particularly on the effect of flow inertial effects on the validity of the local cubic law. For low Reynolds number, typically less than 15, the local cubic law properly describes the fracture flow, especially when the fracture walls have small corrugation amplitudes. For Reynolds numbers higher than 15, the local cubic law is valid under the conditions that the fracture presents a low aspect ratio, small corrugation amplitudes, and a moderate phase lag between its walls.  相似文献   

Estimating average shock pressures recorded by impactite samples based on universal stage investigations of planar deformation features in quartz—Sources of error and recommendations          下载免费PDF全文

S. Holm-Alwmark  L. Ferrière  C. Alwmark  M. H. Poelchau 《Meteoritics & planetary science》2018,53(1):110-130

Planar deformation features (PDFs) in quartz are the most widely used indicator of shock metamorphism in terrestrial rocks. They can also be used for estimating average shock pressures that quartz-bearing rocks have been subjected to. Here we report on a number of observations and problems that we have encountered when performing universal stage measurements and crystallographically indexing of PDF orientations in quartz. These include a comparison between manual and automated methods of indexing PDFs, an evaluation of the new stereographic projection template, and observations regarding the PDF statistics related to the c-axis position and rhombohedral plane symmetry. We further discuss the implications that our findings have for shock barometry studies. Our study shows that the currently used stereographic projection template for indexing PDFs in quartz might induce an overestimation of rhombohedral planes with low Miller–Bravais indices. We suggest, based on a comparison of different shock barometry methods, that a unified method of assigning shock pressures to samples based on PDFs in quartz is necessary to allow comparison of data sets. This method needs to take into account not only the average number of PDF sets/grain but also the number of high Miller–Bravais index planes, both of which are important factors according to our study. Finally, we present a suggestion for such a method (which is valid for nonporous quartz-bearing rock types), which consists of assigning quartz grains into types (A–E) based on the PDF orientation pattern, and then calculation of a mean shock pressure for each sample.  相似文献   

Frontiers and route‐ways from Europe: the Early Middle Palaeolithic of Britain          下载免费PDF全文

Nick Ashton  Claire R. E. Harris  Simon G. Lewis 《第四纪科学杂志》2018,33(2):194-211

  相似文献   

Dust supply from river floodplains: the case of the lower Huang He (Yellow River) recorded in a loess–palaeosol sequence from the Mangshan Plateau     

Maarten A. Prins  Hongbo Zheng  Kay Beets  Simon Troelstra  Patrick Bacon  Ilse Kamerling  Wouter Wester  Martin Konert  Xiangtong Huang  Wang Ke  Jef Vandenberghe 《第四纪科学杂志》2009,24(1):75-84

The Mangshan Plateau is located on the south bank of the Huang He (Yellow River) just west of the city of Zhengzhou, well outside the Loess Plateau in central China. Mixing models of the grain‐size data indicate that the loess deposits are mixtures of three loess components. Comparison of the mixing model with existing models established for a series of loess–palaeosol sequences from the Loess Plateau indicates that the Mangshan loess has been supplied from a proximal dust source, the Huang He floodplain, during major dust outbreaks. The high accumulation rates, the composition of the loess components, and especially the high proportions of a sandy loess component support this. Owing to the exceptionally high accumulation rates, the Mangshan grain size, magnetic susceptibility and carbonate records provide a high‐resolution archive of environmental and climate change. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

QUEST on DASI: a South Pole CMB polarization experiment     

Sarah Church  Peter Ade  James Bock  Melanie Bowden  John Carlstrom  Ken Ganga  Walter Gear  James Hinderks  Wayne Hu  Brian Keating  John Kovac  Andrew Lange  Eric Leitch  Olivier Mallie  Simon Melhuish  Anthony Murphy  Ben Rusholme  Creidhe O&#x;Sullivan  Lucio Piccirillo  Clem Pryke  Andy Taylor  Keith Thompson 《New Astronomy Reviews》2003,47(11-12):1083

QUEST on DASI is a ground-based, high-sensitivity, high-resolution (ℓ_max2500) experiment designed to map CMB polarization at 100 and 150 GHz and to measure the power spectra from E-modes, B-modes from lensing of the CMB, and B-modes from primordial gravitational waves. The experiment comprises a 2.6 m Cassegrain optical system, equipped with an array of 62 polarization-sensitive bolometers (PSBs), located at the South Pole. The instrument is designed to minimize systematic effects; features include differencing of pairs of orthogonal PSBs within a single feed, a rotatable achromatic waveplate, and axisymmetric rotatable optics. In addition the South Pole location allows both repeatable and highly controlled observations. QUEST on DASI will commence operation in early 2005.  相似文献   

The plane of the Edgeworth-Kuiper belt     

Simon J. Collander-Brown  Iwan P. Williams 《Icarus》2003,162(1):22-26

We examine possible locations for the primordial disk of the Edgeworth-Kuiper Belt (EKB), using several subsets of the known objects as markers of the total mass distribution. Using a secular perturbation theory, we find that the primordial plane of the EKB could have remained thin enough to escape detection only if it is clustered very closely about the invariable plane of the Solar System.  相似文献   

High-resolution H i and radio continuum observations of the SNR G290.1−0.8     

Estela M. Reynoso †  Simon Johnston  Anne J. Green  Bärbel S. Koribalski 《Monthly notices of the Royal Astronomical Society》2006,369(1):416-424

We have observed the supernova remnant (SNR) G290.1−0.8 in the 21-cm H  i line and the 20-cm radio continuum using the Australia Telescope Compact Array (ATCA). The H  i data were combined with data from the Southern Galactic Plane Survey to recover the shortest spatial frequencies. In contrast, H  i absorption was analysed by filtering extended H  i emission, with spatial frequencies shorter than 1.1 kλ. The low-resolution ATCA radio continuum image of the remnant shows considerable internal structure, resembling a network of filaments across its 13-arcmin diameter. A high-resolution ATCA radio continuum image was also constructed to study the small-scale structure in the SNR. It shows that there are no structures smaller than ∼17 arcsec, except perhaps for a bright knot to the south, which is probably an unrelated object. The H  i absorption study shows that the gas distribution and kinematics in front of SNR G290.1−0.8 are complex. We estimate that the SNR probably lies in the Carina arm, at a distance 7 (±1) kpc. In addition, we have studied nearby sources in the observed field using archival multiwavelength data to determine their characteristics.  相似文献   

The efficiency of the spiral-in of a black hole to the Galactic Centre     

Piero F. Spinnato  Michael Fellhauer  Simon F. Portegies Zwart 《Monthly notices of the Royal Astronomical Society》2003,344(1):22-32

We study the efficiency at which a black hole or dense star cluster spirals in to the Galactic Centre. This process takes place on a dynamical friction time-scale, which depends on the value of the Coulomb logarithm (ln Λ). We determine the accurate value of this parameter using the direct N -body method, a tree algorithm and a particle-mesh technique with up to two million plus one particles. The three different techniques are in excellent agreement. Our measurement for the Coulomb logarithm appears to be independent of the number of particles. We conclude that  ln Λ= 6.6 ± 0.6  for a massive point particle in the inner few parsec of the Galactic bulge. For an extended object, such as a dense star cluster, ln Λ is smaller, with a value of the logarithm argument Λ inversely proportional to the object size.  相似文献   

Examples of clustering around high redshift radio-galaxies     

J. M. Deltorn  O. Le Fèvre 《Astrophysics》1995,38(4):379-381

Published in Astrofizika, Vol. 38, No. 4, pp. 677–680, October–December, 1995.  相似文献   

Report of the International Astronomical Union Division I Working Group on Precession and the Ecliptic   总被引：1，自引：0，他引：1  

J. L. Hilton  N. Capitaine  J. Chapront  J. M. Ferrandiz  A. Fienga  T. Fukushima  J. Getino  P. Mathews  J.-L. Simon  M. Soffel  J. Vondrak  P. Wallace  J. Williams 《Celestial Mechanics and Dynamical Astronomy》2006,94(3):351-367

The IAU Working Group on Precession and the Equinox looked at several solutions for replacing the precession part of the IAU 2000A precession–nutation model, which is not consistent with dynamical theory. These comparisons show that the (Capitaine et al., Astron. Astrophys., 412, 2003a) precession theory, P03, is both consistent with dynamical theory and the solution most compatible with the IAU 2000A nutation model. Thus, the working group recommends the adoption of the P03 precession theory for use with the IAU 2000A nutation. The two greatest sources of uncertainty in the precession theory are the rate of change of the Earth’s dynamical flattening, ΔJ₂, and the precession rates (i.e. the constants of integration used in deriving the precession). The combined uncertainties limit the accuracy in the precession theory to approximately 2 mas cent⁻². Given that there are difficulties with the traditional angles used to parameterize the precession, z_A, ζ_A, and θ_A, the working group has decided that the choice of parameters should be left to the user. We provide a consistent set of parameters that may be used with either the traditional rotation matrix, or those rotation matrices described in (Capitaine et al., Astron. Astrophys., 412, 2003a) and (Fukushima Astron. J., 126, 2003). We recommend that the ecliptic pole be explicitly defined by the mean orbital angular momentum vector of the Earth–Moon barycenter in the Barycentric Celestial Reference System (BCRS), and explicitly state that this definition is being used to avoid confusion with previous definitions of the ecliptic. Finally, we recommend that the terms precession of the equator and precession of the ecliptic replace the terms lunisolar precession and planetary precession, respectively.  相似文献