Risk-based decision-making for drilling waste discharges using a fuzzy synthetic evaluation technique   总被引：5，自引：0，他引：5  

Rehan Sadiq  Tahir Husain  Neil Bose 《Ocean Engineering》2004,31(16):1929-1953

Offshore petroleum drilling wastes contain toxic substances that are potentially harmful to the marine ecosystem. Despite environmentally benign characteristics, wastes associated with synthetic-based fluids still contain a certain amount of pollutants due to contamination with formation oil and the presence of trace heavy metals in barite, which may pose risk when discharged into the marine environment. A framework is presented here for a decision support system for the selection of the best drilling waste discharge option. Uncertainties in the quantification of risk, cost and technical feasibility are expressed by fuzzy numbers. An analytical hierarchy process with a technique called fuzzy synthetic evaluation is employed to determine the best management alternative (discharge scenario).  相似文献   

Propulsive performance of three naturally occurring oscillating propeller planforms     

Pengfei Liu  N. Bose 《Ocean Engineering》1993,20(1)

A numerical method, the quasi-vortex-lattice method (QVLM), was applied to predict the propulsive performance of three naturally occurring oscillating propellers. These were cetacean flukes for a fin whale (Balaenoptera physalus); white-sided dolphin (Lagenorhynchus acutus); and white whale (Delphinapterus leucas). The fin whale's flukes had the highest aspect ratio (6.1) and moderate sweep angle (31°); the white-sided dolphin's flukes had the highest sweep angle (47°) and lowest aspect ratio (2.7); and the white whale's flukes had moderate aspect ratio (3.3) and the lowest sweep angle (28°). In the numerical simulations, the planforms were assumed to be rigid both in chordwise and spanwise directions, and to be oscillating harmonically in an irrotational, incompressible fluid. Calculation and comparisons of propulsive efficiency and thrust coefficient vs advance ratio for each of the planforms were made in three cases: varied heave amplitude; different pitching axis positions; and varied angular amplitude of pitch.  相似文献   

Studies on flow characteristics of coal–oil–water slurry system     

Subrata Kumar Majumder  Kamal ChandnaDhiren Sankar De  Gautam Kundu 《International Journal of Mineral Processing》2006

Experiments were carried out to investigate the rheological properties of coal–oil–water suspension containing solids of different sizes. Two different coal samples with mean particle sizes of 120 mesh, 175 mesh and 220 mesh were used. The coal concentration was varied from 5% to 25% by weight. Sodium silicate has been used as an additive to study the behavior of the variation of average viscosity of the suspension. A generalized correlation has been developed to predict the average viscosity of suspension in terms of particle diameter of the coal, concentration of coal, viscosity of the suspending medium and the concentration of water. Experimental investigations revealed that coal–oil–water suspensions show an increase in the viscosity with decrease in coal size but with the addition of an additive, the average viscosity tends to decrease initially up to a certain optimum dosages and thereafter it increases with further addition of additives. Two empirical correlations are proposed for average viscosity of the coal–oil–water suspension, μ_sL in terms of physical properties of the solid and viscosity of the suspending medium with and without additives.  相似文献   

The first absolute gravity measurements in Indonesia     

Yoichi Fukuda  Toshihiro Higashi  Shuzo Takemoto  Maiko Abe  Sjafra Dwipa  Dendi Surya Kusuma  Achmad Andan  Koichiro Doi  Yuichi Imanishi  Giuseppe Arduino 《Journal of Geodynamics》2004,38(3-5):489

For the purposes of the calibration of the superconducting gravimeter (SG) in Bandung and the establishment of the absolute gravity (AG) points, we carried out AG measurements for the first time in Indonesia in November 2002. The measurements in Bandung were conducted between November 15th and 20th by means of a FG5 (#210), and 14,520 effective drops were obtained. The gravity value newly determined at the AG point in Bandung is 977976701.2 μgal (1 μgal = 10⁻⁸ ms⁻²) and the scale factor for the SG is −52.22 μgal/V. We also established another AG point in Yogyakarta near Merapi volcano and carried out AG measurements in Yogyakarta between November 22nd and 26th. The gravity value determined for this station is 978203093.5 μgal.  相似文献   

Deformation History of the Kunavaram Complex, Eastern Ghats Belt, India: Implications for Alkaline Magmatism Along the Indo-Antarctica Suture   总被引：1，自引：0，他引：1  

Saibal Gupta  Shamik Bose 《Gondwana Research》2004,7(4):1235-1241

The Kunavaram alkaline complex is a NE-SW trending elongate body located along a major lineament, the Sileru Shear Zone (SSZ) that is regarded as a Proterozoic suture related to Indo-Antarctica collision. The complex is hosted within migmatitic quartzofeldspathic gneisses, mafic granulites retrogressed to amphibolites, and quartzites. The structural evolution of the country rocks and the alkaline complex are similar. The first phase of deformation, D₁, produces a pervasive segregation banding (S₁) in all rock units within and outside the complex. A second deformation phase D₂ isoclinally folded S₁ along subvertical axial planes with shallow plunging axes. F₂ isoclinal folds are ubiquitous in the country rocks and the eastern extremity of the complex. In the interior of the alkaline body, D₂ strain decreases and S₁ is commonly subhorizontal. While amphibolite to granulite facies conditions prevailed during deformation, post-D₂ annealing textures testify to persisting high grade conditions. In the west, a NNE-SSW trending dextral shear zone with strike-slip sense (D₃) truncates the complex. Within this shear zone, quartzofeldspathic country rocks are plastically deformed, while hornblende-K-feldspar assemblages of the complex are retrogressed to biotite and plagioclase. Warping related to D₃ shears also resulted in fold interference patterns on the subhorizontal S₁ foliation in low D₂ strain domains. Based on its steep dip, north-easterly trend, and non-coaxial nature with dextral strike-slip sense, the D₃ shear zone can be correlated with the SSZ. Since this shear zone, i.e., the SSZ, is not associated with primary igneous fabrics and resulted in solid state deformation of the complex, it cannot be considered as a conduit for alkaline magmatism, but is probably responsible for the post-tectonic disposition of the pluton.  相似文献   

The seismic structure of the Saurashtra crust in northwest India and its relationship with the Réunion Plume     

G. Surya Prakasa Rao  H. C. Tewari 《Geophysical Journal International》2005,160(1):319-331

  相似文献   

Assessing the feasibility of CO<Subscript>2</Subscript>-enhanced oil recovery and storage in mature oil field: A case study from Cambay basin     

Shib Sankar Ganguli  Nimisha Vedanti  Idar Akervoll  V. P. Dimri 《Journal of the Geological Society of India》2016,88(3):273-280

The utilization of anthropogenic CO₂ for enhanced oil recovery (EOR) can significantly extend the production life of an oil field, and help in the reduction of atmospheric emission of anthropogenic CO₂ if sequestration is considered. This work summarizes the prospect of EOR and sequestration using CO₂ flooding from an Indian mature oil field at Cambay basin through numerical modelling, simulation and pressure study based on limited data provided by the operator. To get an insight into CO₂-EOR and safe storage process in this oil field, a conceptual sector model is developed and screening standard is proposed keeping in mind the major pay zone of the producing reservoir. To construct the geomodel, depth maps, well positions and coordinates, well data and well logs, perforation depths and distribution of petrophysical properties as well as fluid properties provided by the operator, has been considered. Based on the results from the present study, we identified that the reservoir has the potential for safe and economic geological sequestration of 15.04×10⁶ metric ton CO₂ in conjunction with a substantial increase in oil recovery of 10.4% of original oil in place. CO₂-EOR and storage in this mature field has a bright application prospect since the findings of the present work could be a better input to manage the reservoir productivity, and the pressure field for significant enhancement of oil recovery followed by safe storage.  相似文献   

A numerical method for the solution of the nonlinear turbulent one-dimensional free surface flow equations     

Sujit K Bose 《Computational Geosciences》2018,22(1):81-86

Free surface flow of an incompressible fluid over a shallow plane/undulating horizontal bed is characteristically turbulent due to disturbances generated by the bed resistance and other causes. The governing equations of such flows in one dimension, for finite amplitude of surface elevation over the bed, are the Continuity Equation and a highly nonlinear Momentum Equation of order three. The method developed in this paper introduces the “discharge” variable q = η U, where η = elevation of the free surface above the bed level, and U = average stream-wise forward velocity. By this substitution, the continuity equation becomes a linear first-order PDE and the momentum equation is transformed after introduction of a small approximation in the fifth term. Next, it is shown by an invertibility argument that q can be a function of η: q = F(η), rendering the momentum equation as a first order, second degree ODE for F(η), that can be be integrated by the Runge-Kutta method. The continuity equation then takes the form of a first order evolutionary PDE that can be integrated by a Lax-Wendroff type of scheme for the temporal evolution of the surface elevation η. The method is implemented for two particular cases: when the initial elevation is triangular with vertical angle of 120 ^° and when it has a sinusoidal form. The computations exhibit the physically interesting feature that the frontal portion of the propagating wave undergoes a sharp jump followed by tumbling over as a breaker. Compared to other discretization methods, the application of the Runge-Kutta and an extended version of the Lax-Wendroff scheme is much easier.  相似文献   

Hybrid Gaussian-cubic radial basis functions for scattered data interpolation     

Pankaj K. Mishra  Sankar K. Nath  Mrinal K. Sen  Gregory E. Fasshauer 《Computational Geosciences》2018,22(5):1203-1218

Scattered data interpolation schemes using kriging and radial basis functions (RBFs) have the advantage of being meshless and dimensional independent; however, for the datasets having insufficient observations, RBFs have the advantage over geostatistical methods as the latter requires variogram study and statistical expertise. Moreover, RBFs can be used for scattered data interpolation with very good convergence, which makes them desirable for shape function interpolation in meshless methods for numerical solution of partial differential equations. For interpolation of large datasets, however, RBFs in their usual form, lead to solving an ill-conditioned system of equations, for which, a small error in the data can cause a significantly large error in the interpolated solution. In order to reduce this limitation, we propose a hybrid kernel by using the conventional Gaussian and a shape parameter independent cubic kernel. Global particle swarm optimization method has been used to analyze the optimal values of the shape parameter as well as the weight coefficients controlling the Gaussian and the cubic part in the hybridization. Through a series of numerical tests, we demonstrate that such hybridization stabilizes the interpolation scheme by yielding a far superior implementation compared to those obtained by using only the Gaussian or cubic kernels. The proposed kernel maintains the accuracy and stability at small shape parameter as well as relatively large degrees of freedom, which exhibit its potential for scattered data interpolation and intrigues its application in global as well as local meshless methods for numerical solution of PDEs.  相似文献   

Image analysis of seafloor photographs for estimation of deep-sea minerals     

Rahul Sharma  S. Jai Sankar  Sudeshna Samanta  A. A. Sardar  D. Gracious 《Geo-Marine Letters》2010,30(6):617-626

Factors such as non-uniform illumination of seafloor photographs and partial burial of polymetallic nodules and crusts under sediments have prevented the development of a fully automatic system for evaluating the distribution characteristics of these minerals, necessitating the involvement of a user input. A method has been developed whereby spectral signatures of different features are identified using a software ‘trained’ by a user, and the images are digitized for coverage estimation of nodules and crusts. Analysis of >20,000 seafloor photographs was carried out along five camera transects covering a total distance of 450 km at 5,100–5,300 m water depth in the Central Indian Ocean. The good positive correlation (R² > 0.98) recorded between visual and computed estimates shows that both methods of estimation are highly reliable. The digitally computed estimates were ∼10% higher than the visual estimates of the same photographs; the latter have a conservative operator error, implying that computed estimates would more accurately predict a relatively high resource potential. The fact that nodules were present in grab samples from some locations where photographs had nil nodule coverage emphasises that nodules may not always be exposed on the seafloor and that buried nodules will also have to be accounted for during resource evaluation. When coupled with accurate positioning/depth data and grab sampling, photographic estimates can provide detailed information on the spatial distribution of mineral deposits, the associated substrates, and the topographic features that control their occurrences. Such information is critical for resource modelling, the selection of mine sites, the designing of mining systems and the planning of mining operations.  相似文献