A fluorescent sand-tracer experiment was performed at Comporta Beach (Portugal) with the aim of acquiring longshore sediment transport data on a reflective beach, the optimization of field and laboratory tracer procedures and the improvement of the conceptual model used to support tracer data interpretation.
The field experiment was performed on a mesotidal reflective beach face in low energetic conditions (significant wave height between 0.4 and 0.5 m). Two different colour tracers (orange and blue) were injected at low tide and sampled in the two subsequent low tides using a high resolution 3D grid extending 450 m alongshore and 30 m cross-shore. Marked sand was detected using an automatic digital image processing system developed in the scope of the present experiment.
Results for the two colour tracers show a remarkable coherence, with high recovery rates attesting data validity. Sand tracer displayed a high advection velocity, but with distinct vertical distribution patterns in the two tides: in the first tide there was a clear decrease in tracer advection velocity with depth while in the second tide, the tracer exhibited an almost uniform vertical velocity distribution. This differing behaviour suggests that, in the first tide, the tracer had not reached equilibrium within the transport system, pointing to a considerable time lag between injection and complete mixing. This issue has important implications for the interpretation of tracer data, indicating that short term tracer experiments tend to overestimate transport rates. In this work, therefore, longshore estimates were based on tracer results obtained during the second tide.
The estimated total longshore transport rate at Comporta Beach was 2 × 10− 3 m3/s, more than four times larger than predicted using standard empirical longshore formulas. This discrepancy, which results from the unusually large active moving layer observed during the experiment, confirms the idea that most common longshore transport equations under-estimate total sediment transport in plunging/surging waves. 相似文献
This study addresses paleoclimate influences in a southern Amazonia ecotone based on multiproxy records from lakes of the Carajás region during the last 45k cal a bp. Wet and cool environmental conditions marked the initial deposition in shallow depressions with detrital sediments and high weathering rates until 40k cal a bp. Concomitantly, forest and C3 canga plants, along with cool-adapted taxa, developed; however, short drier episodes enabled expansion of C4 plants and diagenetic formation of siderite. A massive event of siderite formation occurred approximately 30k cal a bp under strong drier conditions. Afterwards, wet and cool environmental conditions returned and persisted until the Last Glacial Maximum (LGM). The LGM was marked by lake-level lowstands and subaerial exposure. The transition from the LGM to the Holocene is marked by the onset of oscillations in temperature and humidity, with an expansion of forest and canga plants. Cool taxa were present for the last time in the Carajás region ~ 9.5–9k cal a bp. After 10k cal a bp , shallow lakes became upland swamps due to natural infilling processes, but the current vegetation types and structures of the plateaus were acquired only after 3k cal a bp under wetter climatic conditions. 相似文献
A generic framework for the computation of derivative information required for gradient-based optimization using sequentially coupled subsurface simulation models is presented. The proposed approach allows for the computation of any derivative information with no modification of the mathematical framework. It only requires the forward model Jacobians and the objective function to be appropriately defined. The flexibility of the framework is demonstrated by its application in different reservoir management studies. The performance of the gradient computation strategy is demonstrated in a synthetic water-flooding model, where the forward model is constructed based on a sequentially coupled flow-transport system. The methodology is illustrated for a synthetic model, with different types of applications of data assimilation and life-cycle optimization. Results are compared with the classical fully coupled (FIM) forward simulation. Based on the presented numerical examples, it is demonstrated how, without any modifications of the basic framework, the solution of gradient-based optimization models can be obtained for any given set of coupled equations. The sequential derivative computation methods deliver similar results compared to FIM methods, while being computationally more efficient. 相似文献
Geotechnical and Geological Engineering - Many studies have investigated polyethylene terephthalate (PET) and polypropylene fibers in soil improvement. However, there is a lack of research using... 相似文献
The site characterization of unsaturated soils is well stablished based on laboratory tests, which are expensive and time-consuming. In-situ testing methods, such as the flat dilatometer test (DMT), are an alternative to the traditional approach of drilling, sampling, and laboratory testing. The literature on DMT interpretation is well established on saturated and well-behaved soils. Only few studies deal with DMT interpretation in unusual soils, and little is known about the influence of soil suction on this test. This paper presents and discusses the influence of soil suction on four DMT campaigns carried out in an unsaturated tropical soil site, also incorporating the soil suction influence on the DMT interpretation. Soil suction was estimated by the soil–water characteristic curve (SWCC) and water content profiles. The water content profiles range from 11.3 to 19.7% which corresponds to a suction range estimated by SWCCs mostly between 6 and 200 kPa. Soil suction significantly influenced DMT data up to 5 m depth at the studied site (the unsaturated active zone) increasing the intermediate DMT parameters. The average horizontal stress index (KD) was equal to about 1.7 and the average dilatometer modulus (ED) was about 4.7 MPa in the active zone and practically doubled their values due to in situ soil suction. The estimated peak friction angle (?) was 20–30% higher due to soil suction influence on DMT assuming the soil behaves as a sand like material. Soil suction must be considered to assess the behavior of the investigated soil by the DMT. The suction influence should be incorporated in the effective stress and this approach considerably improved the site characterization of the studied site.
The distributions of polycyclic alkanes were monitored in a Neocomian sequence (well 1-ESS-34) from the Espirito Santo Basin, southeast Brazil. The profiles included, apart from regular hopanes, significant concentrations of 18α(H), 28,30-bisnorhopane and subordinate amounts of gammacerane. Sterane concentrations, normally with hopane/sterane <5, were compatible with other geochemical data indicating a predominantly planktonic/microbial source of the deposited organic matter. Sample maturities ranged from very immature to the onset of oil generation, allowing biomarker distributions to be followed along a broad maturation range. The ability of certain molecular ratios (e.g. C27 17α(H)/17β(H)hopanes) to reflect a maturity sequence with depth in the closely-spaced strata of the immature upper levels (Jiquiá Stage) showed the value of molecular techniques over classical geochemical methods (e.g. vitrinite reflectance) for the study of immature sequences. The presence in the oils of southern Espirito Santo of 28,30-bisnorhopane, gammacerane and methyl steranes in similar concentrations as in extracts of the deepest levels of the 1-ESS-34 well qualify the Jiquia Stage as the probable source rock of oils accumulated in the basin. 相似文献
The varved sediments that accumulate in the Cariaco Basin provide a detailed archive of the region’s climatic history, including a record of the quantity of fluvial and wind-transported material. In this study, we examine the sedimentological characteristics (clay mineralogy and grain size) of both surface sediments and sinking lithogenic material collected from sediment trap samples over a three-year period from 1997 to 2000. Data from biweekly sediment trap samples show a tri-modal particle size distribution, with prominent peaks at 2, 22 and 80 μm, indicating sediment contributions from both eolian and fluvial sources. The clay mineralogy of the water column samples collected from 1997 to 1999 also shows distinctive characteristics of eolian and fluvial material. An examination of surface sediment samples from the Cariaco Basin indicates that the Unare River is the main source of riverine sediments to the eastern sub-basin. By combining these sedimentological proxies, we estimate that ～10% of the terrigenous material delivered to the Cariaco Basin is eolian, while ～90% is fluvial. This represents an annual dust accumulation rate of ～0.59 mg/cm2/yr. Since aerosols are closely linked to climate variability, the ability to quantify paleo-dust fluxes using sedimentological characteristics will be a useful tool for future paleoclimate studies looking at sub-Saharan aridity and latitudinal migration of the Intertropical Convergence Zone. 相似文献
The Brasília Belt is one of the best preserved Neoproterozoic orogens in Brazil. It comprises a thick Meso–Neoproterozoic sedimentary/metasedimentary pile including the Canastra and Ibiá Groups, which are the object of this study. The Canastra Group constitutes a regressive sedimentary sequence made mainly of greenschist-facies metapelitic and metapsammitic rocks, including phyllite, sandy metarhythmite and quartzite, with minor intercalations of limestone, as well as carbonaceous and carbonatic phyllite. The Ibiá Group is formed of a basal diamictite followed upwards by phyllites and calc-schists. It rests on an erosional unconformity on top of the Canastra Group.A provenance study based on U–Pb zircon geochronology on a selection of seven samples helped to establish the various source areas and maximum depositional ages of the original sediments. In addition, seven new Sm–Nd analyses are presented and discussed together with previously published data.LAM-ICP-MS U–Pb dating of detrital zircon grains indicates a maximum depositional age of the Canastra and Ibiá Groups of ca. 1030 and 640 Ma, respectively. The provenance signature of the Canastra Group comprises a wide range of detrital zircon ages with a significant Paleoproterozoic component (～1.8 and ～2.1 Ga) and an important Mesoproterozoic source (1.1–1.2 Ga), especially for the Paracatu Formation, indicating the São Francisco–Congo Craton as main source. These provenance data, in particular the absence of Neoproterozoic zircon grains, typical of the active margin of the Brasília Belt, allied with the homogeneous Paleoproterozoic TDM values are consistent with the previous interpretation that the Canastra Group represents a sedimentary sequence deposited on a passive margin setting.Zircon grains from the diamictite of the Ibiá Group yielded ages ranging from 936 to 2500 Ma. In contrast, the overlying calc-phyllite of the Rio Verde Formation reveals a dominant Neoproterozoic provenance pattern with important peaks at 665, 740 and 850 Ma. The São Francisco-Congo Craton and Goiás Magmatic Arc are, most probably, the two main source regions for the Ibiá Group which may represent, therefore, a former fore- or back-arc sedimentary sequence. Tectonically, therefore, the Ibiá Group is equivalent to the Araxá Group exposed in central Goiás and both represent syn-orogenic sedimentary sequences formed with important detrital contributions derived from the Neoproterozoic Goiás Arc.The provenance data presented here indicate that the Cubatão Formation is most possibly representative of a Marinoan or younger glacial event. 相似文献
