Integrative propositions for adapting conservation policy to the impacts of climate change     

Shannon Hagerman  Hadi Dowlatabadi  Kai M.A. Chan  Terre Satterfield 《Global Environmental Change》2010,20(2):351-362

Conservation policies have changed over time in response to changes in human and ecological drivers. The impacts of climate (and other) concurrent changes prompt consideration of further iterations for both conservation means and objectives. In this paper we bring together previous disparate literatures and apply them to the question of how to adapt conservation polices to suit an era of climate change impacts. Our approach is based on two assertions: (i) that the integration of specific natural and social science insights is essential for understanding and effectively responding to this challenge, and (ii) that in addition to adaptive conservation means (strategies), attention needs to be given to considering adaptive conservation objectives. Specifically, we convert a core set of natural and social science insights into analytical tools known as heuristics or rules of thumb. We then use the heuristics as a basis to offer a list of preliminary propositions that can help inform the development of new means and objectives. The propositions address key considerations including recalibrating management objectives, the role of disturbance in facilitating ecological transitions, and overarching topics relating to governance. The propositions are speculative, and so intended only to outline potential avenues for further empirical research and subsequent refinement. In the spirit of adaptation, we expect and welcome their revision.  相似文献   

An evaluation of the relationship between physical/mechanical properties and mineralogy of landscape rocks as determined by hyperspectral reflectance     

Erdem Emin Maras  Mustafa Caniberk  Mehmet Serhat Odabas  Burcu Degerli  Süleyman Sirri Maras  Hadi Hakan Maras 《Arabian Journal of Geosciences》2016,9(2):164

We investigated the relationships between mineral content and the physical and mechanical properties of landscape rock using a non-destructive remote sensing method applied in the laboratory. Using this technique, the spectral properties of the landscape rock could be collected at different wavelengths without harming the samples. Differences in spectral reflectance were compared with the physical and mechanical properties of the stone. Significant correlations were observed between reflectance values and the rocks’ mechanical and physical properties, with correlation coefficients of 95 to 99 %. However, establishing a correlation between two variables is not a sufficient condition to establish a causal relationship. Mineral densities and mineral content are characteristics used for the classification of landscape rock. We have concluded that although spectral signatures from landscape rock can be used for predicting which stones might have similar features when comparing two batches of stone, the high correlations we discovered cannot confirm a cause and effect relationship that would allow for the prediction of a rock’s physical and mechanical properties. Although this conclusion is disappointing, the mineral content and the significant correlations discovered by hyperspectral reflectance scanning can be used as supplementary information when comparing two samples of landscape rock.  相似文献   

Did satellite imagery supersede aerial imagery? A perspective from 3D geopositioning accuracy     

Altan Yilmaz  Mustafa Erdogan  Hadi Hakan Maras  Bahadir Aktug  Suleyman Sirri Maras 《Arabian Journal of Geosciences》2016,9(4):324

In this study, the geometric accuracy comparison of aerial photos and WorldView-2 satellite stereo image data is evaluated with the different number and the distribution of the ground control points (GCPs) on the basis of large scale map production. Also, the current situation of rivalry between airborne and satelliteborne imagery was mentioned. The geometric accuracy of Microsoft UltraCam X 45 cm ground sampling distance (GSD) aerial imagery and WorldView-2 data both with and without GCPs are also separately analyzed. The aerial photos without any GCP by only using global navigation satellite system (GNSS) and inertial measurement unit (IMU) data with tie points give an accuracy of ±1.17 m in planimetry and ±0.71 m in vertical that means nearly two times better accuracy than the rational polynomial coefficient (RPC) of stereo WorldView-2. Using one GCP affects the accuracies of aerial photos and WorldView-2 in different ways. While this situation distorts the aerial photo block, it corrects the shift effect of RPC in WorldView-2 and increases the accuracy. By using four or more GCPs, ½?pixel (～0.23 m) accuracy in aerial photos and 1 pixel (～0.50 m) accuracy in WorldView-2 can be achieved in horizontal. In vertical, aerial photos have 1 pixel (～0.55 m) and WorldView-2 has 1.5 pixels (～0.85 m) accuracy. These results show that Worldview-2 imagery can be used in the production of class I 1:5000 scale maps according to the ASPRS Accuracy Standards for Digital Geospatial Data in terms of geometric accuracy. It is concluded that the rivalry between aerial and satellite imagery will continue for some time in the future.  相似文献   

Computing derivative information of sequentially coupled subsurface models     

Rafael J. de Moraes  José R. P. Rodrigues  Hadi Hajibeygi  Jan Dirk Jansen 《Computational Geosciences》2018,22(6):1527-1541

A generic framework for the computation of derivative information required for gradient-based optimization using sequentially coupled subsurface simulation models is presented. The proposed approach allows for the computation of any derivative information with no modification of the mathematical framework. It only requires the forward model Jacobians and the objective function to be appropriately defined. The flexibility of the framework is demonstrated by its application in different reservoir management studies. The performance of the gradient computation strategy is demonstrated in a synthetic water-flooding model, where the forward model is constructed based on a sequentially coupled flow-transport system. The methodology is illustrated for a synthetic model, with different types of applications of data assimilation and life-cycle optimization. Results are compared with the classical fully coupled (FIM) forward simulation. Based on the presented numerical examples, it is demonstrated how, without any modifications of the basic framework, the solution of gradient-based optimization models can be obtained for any given set of coupled equations. The sequential derivative computation methods deliver similar results compared to FIM methods, while being computationally more efficient.  相似文献   

Subduction-related mafic to felsic magmatism in the Malayer–Boroujerd plutonic complex,western Iran     

Reza Deevsalar  Ryuichi Shinjo  Jean P. Liégeois  Mohammad V. Valizadeh  Jamshid Ahmadian  Hadi Yeganehfar  Mamoru Murata  Iain Neill 《Swiss Journal of Geoscience》2018,111(1-2):269-293

The Malayer–Boroujerd plutonic complex (MBPC) in western Iran, consists of a portion of a magmatic arc built by the northeast verging subduction of the Neo-Tethys plate beneath the Central Iranian Microcontinent (CIMC). Middle Jurassic-aged felsic magmatic activity in MBPC is manifested by I-type and S-type granites. The mafic rocks include gabbroic intrusions and dykes and intermediate rocks are dioritic dykes and minor intrusions, as well as mafic microgranular enclaves (MMEs). MBPC Jurassic-aged rocks exhibit arc-like geochemical signatures, as they are LILE- and LREE-enriched and HFSE- and HREE-depleted and display negative Nb–Ta anomalies. The gabbro dykes and intrusions originated from metasomatically enriched garnet-spinel lherzolite [Degree of melting (f_mel) ~ 15%] and exhibit negative Nd and positive to slightly negative ε_Hf(T) (+ 3.0 to ? 1.6). The data reveal that evolution of Middle Jurassic magmatism occurred in two stages: (1) deep mantle-crust interplay zone and (2) the shallow level upper crustal magma chamber. The geochemical and isotopic data, as well as trace element modeling, indicate the parent magma for the MBPC S-type granites are products of upper crustal greywacke (f_mel: 0.2), while I-type granites formed by partial melting of amphibolitic lower crust (f_mel: 0.25) and mixing with upper crustal greywacke melt in a shallow level magma chamber [Degree of mixing (f_mix): 0.3]. Mixing between andesitic melt leaving behind a refractory dense cumulates during partial crystallization of mantle-derived magma and lower crustal partial melt most likely produced MMEs (f_mix: 0.2). However, enriched and moderately variable ε_Nd(T) (? 3.21 to ? 4.33) and high (⁸⁷Sr/⁸⁶Sr)_i (0.7085–0.7092) in dioritic intrusions indicate that these magmas are likely experienced assimilation of upper crustal materials. The interpretations of magmatic activity in the MBPC is consistent with the role considered for mantle-derived magma as heat and mass supplier for initiation and evolution of magmatism in continental arc setting, elsewhere.  相似文献   

Evaluation of the effect of river style framework on water quality: application of geomorphological factors     

Hadi Nayyeri  Sahar Zandi 《Environmental Earth Sciences》2018,77(9):343

The Tarwal River basin with an area of 6560.20 km² is located in the eastern part of Iranian Kurdistan Province. This river crosses the Qorveh and Dehgolan plains and joins the Ghezel Ozan River in Zanjan Province. The importance of this river as a source for drinking water and agricultural and industrial uses in the region necessitates the need for research in this field. The main purpose of this study is to identify the natural features of the riverbed from the perspective of river geomorphology and to investigate their impact on water quality and river self-purification capacity. To achieve this, the river style framework was employed. To investigate the effects of each style framework on the river, a total of 20 samples from the entrance and outlet of styles were obtained using Impact Assessment method and sampling standards which were later analyzed for their quality parameters including T, pH, EC, TDS, TSS, Na, Ca, Mg, K, Cl, F, NO₂, NO₃, SO₄, PO₄, DO, COD and BOD. The results indicated that the changes in the styles lead to changes in water quality and the impact of each style is greater on the physical parameters than the chemical parameters. The river self-purification capacity varied depending on the style. The maximum and the minimum self-purifications occurred in fine-grained Anabranching and low-sinuosity fine-grained styles, respectively.  相似文献   

Monitoring and prediction of land use/land cover changes using CA-Markov model: a case study of Ravansar County in Iran   总被引：1，自引：0，他引：1  

Hazhir Karimi  Javad Jafarnezhad  Jabbar Khaledi  Parisa Ahmadi 《Arabian Journal of Geosciences》2018,11(19):592

Human‐induced land use/land cover (LULC) changes are among the most important processes that shape the dynamics of the earth’s surface. This phenomenon, which is occurring at an astonishing rate, and its consequential environmental impacts have become an important area of research for scientists.Therefore, a wide range of methods and models have been developed to detect and predict these alterations, among which cellular automata (CA) models such as the CA‐Markov model, due to their affinity to geographic information system (GIS) and remote sensing (RS), are appropriate for detailed resolution modelling and simulating dynamic spatial processes. In Iran, the district of Ravansar has undergone severe LULC changes recently, thus to take the necessary precautions, decision‐makers need to predict and determine the extent of these changes. In this study, using spatial analysis methods the LULC changes in Ravansar were investigated from 1992 to 2015. Subsequently, the CA‐Markov model was applied to simulate the spatial pattern changes of LULC until 2030. Our results indicated that from 1992 to 2015, this region has witnessed a noticeable increase in the areas of the built‐up and agricultural lands (both aquatic and non‐aquatic), resulting in the decrease of the gardens, range, and bare lands. The simulated LULC map showed that this trend will continue due to more urbanization and development of agricultural areas.  相似文献   

A near-fault probabilistic seismic hazard assessment for Yasouj,located in the Kazerun fault system,southwest Iran     

Eftekhari  Seyed Nasrollah  Sayyadpour  Hadi  Kowsari  Milad 《Natural Hazards》2021,105(2):1945-1961

Natural Hazards - The Kazerun fault system (KFS) is located in the central part of the Zagros, the most seismically active orogenic belt in the Iranian plateau. The city of Yasouj is located in the...  相似文献   

Effect of Drain Pipes on Uplift Force and Exit Hydraulic Gradient and the Design of Gravity Dams Using the Finite Element Method     

Aghdam  Ali Taheri  Salmasi  Farzin  Abraham  John  Arvanaghi  Hadi 《Geotechnical and Geological Engineering》2021,39(5):3383-3399

Geotechnical and Geological Engineering - The effects of diameter and location of drain pipes on the uplift force and exit hydraulic gradient for a gravity dam are investigated. A numerical model...  相似文献   

Experimental study on the effect of bottomless structure in front of a bottom outlet on a sediment flushing cone     

Hadi Haghjouei  Majid Rahimpour  Kourosh Qaderi  Sameh AKantoush 《国际泥沙研究》2021,36(3):335-347

One of the main problems in reservoirs is sedimentation which reduces the operating life of dams if a proper plan and analysis method are not in place.The techniques to manage sediment in reservoirs include several sustainable management techniques that route sediment through or around the reservoir.One of the main economical methods in arid and semi-arid regions is pressurized flushing using moderate drawdown of the water level of the reservoir to evacuate sediment deposited behind dams.In the current study,the effect of a new structure called a dendritic bottomless extended(DBE)outlet structure at three angles of 30°,45°,and 60°
on pressurized flushing efficiency was investigated.Consequently,45 experiments were designed for three discharge rates (Qo),three sediment levels(Hs),four types of structure,and a no-structure condition(reference test).The results indicated that the DBE structure with a 30°angle between the branches,a sedimentary dimensionless index of Hs/Do=4.59,and a flow dimensionless index of Qo=/√gD05=1:43(where g is the acceleration of gravity and Do is the diameter of the bottom outlet)lead to 10-fold increase in the sediment flushing cone dimensions and sediment removal efficiency compared to the results of the reference test.Finally,according to a statistical analysis of the results,a dimensionless equation for calculating the sediment flushing cone dimensions was developed for the tested sediment characteristics.  相似文献