On the geologic structure of the Explora Escarpment (Weddell Sea,Antarctica) revealed by satellite and Shipboard data evaluation     

Ute Christina Herzfeld  Arnold L. Brodscholl 《Marine Geophysical Researches》1994,16(5):325-345

Bathymetric, gravity, and magnetic data from Antarctic expeditions with RV POLARSTERN and satellite altimeter data from the Geosat Geodetic Mission are analysed using methods from geostatistics and geophysical inverse theory.The Explora Escarpment represents the edge between the Antarctic Continental Shelf and the Weddell Abyssal Plain. It is an important link in the reconstruction of Gondwana breakup, but a feature as large as the 2000 m deep Wegener Canyon was only discovered in 1984, when extensive bathymetric, gravimetric, and magnetic surveys with RV POLARSTERN began.Geostatistics, the theory of regionalized variables, is applied to integrate dense surveys of Wegener Canyon and sparse observations in adjacent areas into maps with full coverage of the 230 km by 330 km area at 10°–20° W/70°–72° S. The resultant highresolution bathymetric and gravity maps reveal detailed structures of the Explora Escarpment. Using geophysical inversion, the gravity terrain effect is calculated. Satellite data are used for their better coverage, but have much lower resolution. Nevertheless, the structures of Wegener Canyon and other more prominent features appear with surprisingly good correlation also in the Geosat altimeter data. While it was initially supposed that Wegener Canyon is purely an erosional structure, the magnetic map now provides evidence of the canyon's tectonic origin.  相似文献   

Influence of oxygen fugacity on mineral compositions in peralkaline melts: The Katzenbuckel volcano, Southwest Germany     

Ute Mann  Michael Marks  Gregor Markl   《Lithos》2006,91(1-4):262-285

The igneous rocks of the Katzenbuckel, Southwest Germany, represent a unique and unusual alkaline to peralkaline association within the European Volcanic Province. The magmatic activity can be subdivided into two main phases. Phase I comprises the main rock bodies of phonolite and nepheline syenite, which were later intruded by different peralkaline dyke rocks (tinguaites and alkali feldspar syenite dykes) of phase II. The dyke assemblage was accompanied by magnetite and apatite veins and was followed by a late-stage pneumatolytic activity causing autometasomatic alterations.

As is typical for alkaline to peralkaline igneous rocks, early mafic minerals of phase I rocks comprise olivine, augite and Fe–Ti oxides, which are substituted in the course of fractionation by Na-amphibole and Na-pyroxene. For the early magmatic stage, calculated temperatures range between 880 and 780 °C with low silica activities (0.4 to 0.6) but high relative oxygen fugacities between 0.5 and 1.9 log units above the FMQ buffer. Even higher oxygen fugacities (above the HM buffer) are indicated for the autometasomatic alteration, which occurred at temperatures between 585 and 780 °C and resulted in the formation of pseudobrookite and hematite.

The unusually high oxygen fugacities (even during the early magmatic stage) are recorded by the major element compositions of the mafic minerals (forsterite content in olivine between 68 and 78 mol%, up to 6.2 wt.% ZrO₂ and 8.5 wt.% TiO₂ in clinopyroxene), the unusual mineral assemblages (pseudobrookite, freudenbergite) and by the enrichment of Fe³⁺ in the felsic minerals (up to 2.8 wt.% Fe₂O₃ in alkali feldspar and up to 2.6 wt.% Fe₂O₃ in nepheline). These observations point to a metasomatically enriched and highly oxidized lithospheric mantle as a major source for the Katzenbuckel melts.  相似文献   

A high-resolution magnetotelluric survey of the Iapetus Suture Zone in southwest Scotland   总被引：1，自引：0，他引：1  

Sebastian Tauber  Roger Banks  Oliver Ritter  Ute Weckmann 《Geophysical Journal International》2003,153(3):548-568

  相似文献   

Resolution limits for crosswell migration and traveltime tomography   总被引：2，自引：1，他引：2  

Gerard T. Schuster 《Geophysical Journal International》1996,127(2):427-440

  相似文献   

Mullite in Libyan Desert Glass: Evidence for high-temperature/low-pressure formation          下载免费PDF全文

Ansgar Greshake  Richard Wirth  Jörg Fritz  Tomasz Jakubowski  Ute Böttger 《Meteoritics & planetary science》2018,53(3):467-481

Libyan Desert Glass (LDG) is a SiO₂-rich natural glass whose origin, formation mechanism, and target material are highly debated. We here report on the finding of a lens-shaped whitish inclusion within LDG. The object is dominantly composed of siliceous glass and separated from the surrounding LDG by numerous cristobalite grains. Within cristobalite, several regions rich in mullite often associated with ilmenite were detected. Mineral assemblage, chemical composition, and grain morphologies suggest that mullite was formed by thermal decomposition of kaolinitic clay at atmospheric pressure and T ≥ 1600 °C and also attested to high cooling rates under nonequilibrium conditions. Cristobalite contains concentric and irregular internal cracks and is intensely twinned, indicating that first crystallized β-cristobalite inverted to α-cristobalite during cooling of the SiO₂-rich melt. The accompanied volume reduction of 4% induced the high density of defects. The whitish inclusion also contains several partly molten rutile grains evidencing that at least locally the LDG melt was at T ≥ 1800 °C. Based on these observations, it is concluded that LDG was formed by high-temperature melting of kaolinitic clay-, rutile-, and ilmenite-bearing Cenozoic sandstone or sand very likely during an asteroid or comet impact onto Earth. While melting and ejection occurred at high pressures, the melt solidified quickly at atmospheric pressure.  相似文献   

Analysis of anomalies in ADS-B and its GPS data     

Busyairah Syd Ali  Wolfgang Schuster  Washington Ochieng  Arnab Majumdar 《GPS Solutions》2016,20(3):429-438

Traditionally, the surveillance component of the air traffic management system has been based on radar, which consists of two separate systems: primary radar and secondary radar, which both enable the measurement of the aircraft range and bearing to the radar station. Primary radar is based on signals emitted by a ground station simply being reflected off an object and detected by a ground-based receiver. Secondary radar also emits signals, but relies upon a transponder onboard the aircraft to emit a signal itself, modulated among others by a four-digit aircraft identity (Mode A), aircraft altitude (Mode C) and/or 24-bit unique address (Mode S). Typical accuracies of secondary radar are of the order of 0.03 NM in range and 0.07° in azimuth. However, no position integrity report is provided. Air traffic density is expected to significantly increase in the future. In order to maintain or enhance air travel efficiency, while maintaining safety, more accurate surveillance systems, with the required integrity, will be required. Automatic dependent surveillance–broadcast (ADS-B) is a new aviation surveillance system, envisioned to overcome the limitations of radar and to enhance surveillance performance and thereby increase airspace capacity. However, its high dependence on external systems such as onboard navigation and communication systems also increases the number of potential points of failure. It is important to understand and mitigate these failure modes before the system can reliably be implemented. The present study emerged as an exploratory research as part of a safety assessment framework development for the ADS-B system. It reviews the ADS-B failure modes, data collection and analysis of ADS-B and its corresponding onboard GPS data. The study identifies a set of failures common to certain aircraft models, with consistent error patterns. A key failure mode was found to be associated with the navigation data from the onboard GPS. We discuss the identified failure modes and investigate the nature and causes of these failures. The findings highlight some of the deficiencies of the current ADS-B system, which will need to be addressed before the ADS-B system can reliably be implemented.  相似文献   

Environmental Monitoring and Peat Assessment Using Multivariate Analysis of Regional-Scale Geochemical Data     

Jennifer M. McKinley  Eric Grunsky  Ute Mueller 《Mathematical Geosciences》2018,50(2):235-246

A compositional multivariate approach was used to analyse regional-scale soil geochemical data obtained as part of the Tellus Project generated by the Geological Survey of Northern Ireland. The multi-element total concentration data presented comprise X-ray fluorescence (XRF) analyses of 6862 rural soil samples collected at 20-cm depth on a non-aligned grid at one site per \(2\,\hbox {km}^{2}\). Censored data were imputed using published detection limits. Each soil sample site was assigned to the regional geology map, resulting in spatial data for one categorical variable and 35 continuous variables comprised of individual and amalgamated elements. This paper examines the extent to which soil geochemistry reflects the underlying geology or superficial deposits. Since the soil geochemistry is compositional, log-ratios were computed to adequately evaluate the data using multivariate statistical methods. Principal component analysis (PCA) and minimum/maximum autocorrelation factors (MAF) were used to carry out linear discriminant analysis (LDA) as a means to discover and validate processes related to the geologic assemblages coded as age bracket. Peat cover was introduced as an additional category to measure the ability to predict and monitor fragile ecosystems. Overall prediction accuracies for the age bracket categories were 68.4 % using PCA and 74.7 % using MAF. With inclusion of peat, the accuracy for LDA classification decreased to 65.0 and 69.9 %, respectively. The increase in misclassification due to the presence of peat may reflect degradation of peat-covered areas since the creation of superficial deposit classification.  相似文献   

Polymetamorphic relations in iron ores from the Iron Quadrangle,Brazil: The correlation of oxygen isotope variations with deformation history   总被引：2，自引：0，他引：2  

Joachim Hoefs  Georg Müller  Alfred K. Schuster 《Contributions to Mineralogy and Petrology》1982,79(3):241-251

This study deals with the oxygen isotope composition of hematite-rich ore bodies in the Iron Quadrangle, Brazil. The area studied can be divided into two different regions: a western (W) zone of greenschist facies assemblages and an eastern (E) zone of amphibolite facies with transitions into granulite facies assemblages.The ¹⁸O values of 136 quartz-iron oxide pairs have been determined and temperatures of formation have been calculated. The ¹⁸O values of quartz vary between +6 and 20 except one value near +23, whereas the iron oxides fall between –4 and +10, with nearly 80% of the iron oxide values between –0.5 and 4.0. The regional distribution of the ¹⁸O values is as follows: in the W-region 85% of the quartz are >12, whereas in the E-region only 46% fall in this range, In contrast to quartz the iron oxides do not show any regional differences.The variation of oxygen isotope fractionations between quartz and iron oxides is obviously related to the complex deformation history of the iron ores. Samples with a primary schistosity (S₁) only represent peak metamorphic conditions. In the E-region the (S₁) high temperatures >700° C seem to correspond to orogenic events in the Archaen basement 2,700 m.y. ago. In the W-region S₁-temperatures between 460° and 560° C seem to represent peak metamorphic conditions of the Proterozoic Minas metamorphism 2,000 m.y. ago. Iron ores which have been overprinted by later deformation events are selectively reset to lower isotopic temperatures. The more closely spaced the schistosity planes the larger the extent of a temperature lowering.The genetic processes associated with these hematite-rich ore bodies appear to be sedimentary-metamorphic rather than metasomatic processes. Furthermore, there is no evidence for secondary leaching by weathering solutions.  相似文献   

Rock magnetism of greigite bearing sediments from the Dead Sea, Israel     

Ute Frank  Norbert R. Nowaczyk  Jörg F. W. Negendank 《Geophysical Journal International》2007,168(3):921-934

  相似文献   

Two Experimental Methods to Determine the Speciation of Cadmium in Sediment from the River Neckar     

N. Martin  I. Schuster  St. Peiffer 《洁净——土壤、空气、水》1996,24(2):68-76

The binding forms of Cd to an anaerobic sediment of low sulfide content from Lauffen reservoir (River Neckar, Germany) were studied using two different approaches, i. e. sequential extraction (modified from published protocols) and titrimetric study of the pH-dependent Cd release. Thermodynamic equilibrium calculations were applied to calculate both the release pattern of Cd during the titrations and the speciation of Cd within the single fractions of the extraction protocol. The calculations were based on measured sediment parameters such as hydrous ferric oxide (HFO), acid volatile sulfide, carbonate content and total Cd content, and the extractants (oxalate, acid etc.) used. The results of the two independent approaches coincided well in that they both assigned more than two thirds of the total Cd content to be adsorbed to organic matter. Cd bound as CdS is of little importance. Sequential extraction after a 3-month oxidation period at pH 7 revealed a shift of Cd from being mainly bound in stronger surface complexes with organic matter to being mainly bound in weaker surface complexes with organic matter and HFO, and thus becoming more bioavailable. This study suggests that the use of sequential extraction although being frequently criticized due to its operational character can be used to determine binding forms of metal ions if they are accompanied by 1) careful supporting experiments, 2) analysis of important sediment parameters, and 3) the use of thermodynamic equlibrium models which can help to understand Cd speciation within the extraction fractions.  相似文献