An analytical approach to ascertain saturation‐excess versus infiltration‐excess overland flow in urban and reference landscapes     

Ryan D. Stewart  Aditi S. Bhaskar  Anthony J. Parolari  Dustin L. Herrmann  Jinshi Jian  Laura A. Schifman  William D. Shuster 《水文研究》2019,33(26):3349-3363

Uncontrolled overland flow drives flooding, erosion, and contaminant transport, with the severity of these outcomes often amplified in urban areas. In pervious media such as urban soils, overland flow is initiated via either infiltration‐excess (where precipitation rate exceeds infiltration capacity) or saturation‐excess (when precipitation volume exceeds soil profile storage) mechanisms. These processes call for different management strategies, making it important for municipalities to discern between them. In this study, we derived a generalized one‐dimensional model that distinguishes between infiltration‐excess overland flow (IEOF) and saturation‐excess overland flow (SEOF) using Green–Ampt infiltration concepts. Next, we applied this model to estimate overland flow generation from pervious areas in 11 U.S. cities. We used rainfall forcing that represented low‐ and high‐intensity events and compared responses among measured urban versus predevelopment reference soil hydraulic properties. The derivation showed that the propensity for IEOF versus SEOF is related to the equivalence between two nondimensional ratios: (a) precipitation rate to depth‐weighted hydraulic conductivity and (b) depth of soil profile restrictive layer to soil capillary potential. Across all cities, reference soil profiles were associated with greater IEOF for the high‐intensity set of storms, and urbanized soil profiles tended towards production of SEOF during the lower intensity set of storms. Urban soils produced more cumulative overland flow as a fraction of cumulative precipitation than did reference soils, particularly under conditions associated with SEOF. These results will assist cities in identifying the type and extent of interventions needed to manage storm water produced from pervious areas.  相似文献   

Do sedentary behavior and physical activity spatially cluster? Analysis of a population-based sample of Boston adolescents     

Kosuke Tamura  Dustin T. Duncan  Jessica Athens  Marc Scott  Michael RientiJr.  Jared Aldstadt  Laurie M. Brotman  Brian Elbel 《GeoJournal》2018,83(4):775-782

Sedentary behavior and lack of physical activity are key modifiable behavioral risk factors for chronic health problems, such as obesity and diabetes. Little is known about how sedentary behavior and physical activity among adolescents spatially cluster. The objective was to detect spatial clustering of sedentary behavior and physical activity among Boston adolescents. Data were used from the 2008 Boston Youth Survey Geospatial Dataset, a sample of public high school students who responded to a sedentary behavior and physical activity questionnaire. Four binary variables were created: (1) TV watching (>2 h/day), (2) video games (>2 h/day), (3) total screen time (>2 h/day); and (4) 20 min/day of physical activity (≥5 days/week). A spatial scan statistic was utilized to detect clustering of sedentary behavior and physical activity. One statistically significant cluster of TV watching emerged among Boston adolescents in the unadjusted model. Students inside the cluster were more than twice as likely to report >2 h/day of TV watching compared to respondents outside the cluster. No significant clusters of sedentary behavior and physical activity emerged. Findings suggest that TV watching is spatially clustered among Boston adolescents. Such findings may serve to inform public health policy-makers by identifying specific locations in Boston that could provide opportunities for policy intervention. Future research should examine what is linked to the clusters, such as neighborhood environments and network effects.  相似文献   

Matt Wilson structure: record of an impact event of possible Early Mesoproterozoic age,Northern Territory     

I. P. Sweet  P. W. Haines  K. Mitchell 《Australian Journal of Earth Sciences》2013,60(4-5):675-688

The Matt Wilson structure is a circular 5.5 km-diameter structure in Early Mesoproterozoic or Neoproterozoic rocks of the Victoria Basin, Northern Territory. It lies in regionally horizontal to gently dipping Wondoan Hill and Stubb Formations (Tijunna Group) and Jasper Gorge Sandstone (Auvergne Group). An outer circumferential syncline with dips of 5?–?40° in the limbs surrounds an intermediate zone with faulted sandstone displaying horizontal to low dips, and a central steeply dipping zone about 1.5 km across. Several thrust faults in the outer syncline appear to indicate outward-directed forces. The central zone, marked by steeply dipping to overturned Tijunna Group and possibly Bullita Group sandstone and mudstone, indicates uplift of at least 300 m. The rocks are intensely fractured with some brecciation, and contain numerous planar to subtly undulating surfaces displaying striae which resemble shatter cleavage. Thin-sections of sandstone from the central area show zones of intense microbrecciation and irregular and planar fractures in quartz, but no melt-rocks have been identified. The planar fractures occur in multiple intersecting parallel sets typical of relatively low-level (5?–?10 GPa) shock-pressure effects. Alternative mechanisms, i.e. igneous intrusion, carbonate collapse, diapirism and regional deformation processes, have been discounted. The circular nature, central uplift, faulting, shatter features and planar fractures are all consistent with an impact origin. The Matt Wilson structure is most likely a deeply eroded impact structure in which the more highly shocked rocks of the original crater floor have been removed by erosion. Estimates of the age of the Auvergne and Tijunna Groups range from Early Mesoproterozoic (which we favour) to Late Neoproterozoic. Early Cambrian Antrim Plateau Volcanics near the impact structure show no signs of impact effects, allowing the age of impact to be constrained between Early Mesoproterozoic and Early Cambrian. The presence of widespread soft-sediment deformation features, apparently confined to a single horizon in the Saddle Creek Formation some 700?–?1000 m stratigraphically higher in the Auvergne Group than the rocks at the impact site, and apparently increasing in thickness towards the Matt Wilson structure, lead us to speculate that this probable event horizon is related to the impact event: if correct the impact occurred during deposition of the Saddle Creek Formation.  相似文献   

Tropical instability wave interactions within the Galápagos Archipelago     

W.V. Sweet  J.M. Morrison  Y. Liu  D. Kamykowski  B.A. Schaeffer  L. Xie  S. Banks 《Deep Sea Research Part I: Oceanographic Research Papers》2009,56(8):1217-1229

The effects of tropical instability waves (TIW) within the eastern equatorial Pacific during the boreal fall of 2005 were observed in multiple data sets. The TIW cause oscillations of the sea surface temperature (SST), meridional currents (V), and 20 °C isotherm (thermocline). A particularly strong 3-wave packet of ～15-day period TIW passed through the Galápagos Archipelago in Sep and Oct 2005 and their effects were recorded by moored near-surface sensors. Repeat Argo profiles in the archipelago showed that the large temperature (>5 °C) oscillations that occurred were associated with a vertical adjustment within the water column. Numerical simulations report strong oscillations and upwelling magnitudes of ～5.0 m d^?1 near the Tropical Atmosphere Ocean (TAO) buoy at 0°, 95°W and in the Archipelago at 92°W and 90°W. A significant biological response to the TIW passage was observed within the archipelago. Chlorophyll a measured by the Sea-viewing Wide Field-of-view Sensor (SeaWiFS) increased by >30% above 1998–2007 mean concentrations within the central archipelago. The increases coincide with coldest temperatures and the much larger increases within the archipelago as compared to those of 95°W indicate that TIW induced upwelling over the island platform itself brought more iron-enriched upwelling waters into the euphotic zone.  相似文献   

Tectonic control on third‐order sequences in a siliciclastic ramp‐style basin: An example from the Roper Superbasin (Mesoproterozoic), northern Australia     

S. T. Abbott  I. P. Sweet 《Australian Journal of Earth Sciences》2013,60(3):637-657

TThe Roper Group is a cyclic, predominantly marine, siliciclastic succession of Calymmian (Early Mesoproterozoic) age. It has a distribution of at least 145 000 km² and a maximum known thickness of ～5000 m. In the Roper River district the middle part of the Roper Group (～1300 m thick) is characterised by the cyclical alternation of mudstone and sandstone units, and can be divided into six third‐order depositional sequences. A typical sequence is broadly progradational in aspect, and comprises a lower, mudstone‐rich, storm‐dominated shelf succession (up to 330 m thick), and a sequence‐capping unit dominated by tidal‐platform cross‐bedded sandstone (up to 80 m thick); both are interpreted as highstand systems tracts. Transgressive strata are poorly represented but where present are characterised by paralic to fluvial redbed assemblages that include ooidal ironstone. Roper Group sequences lack a distinct condensed section and sequence boundaries are mostly conformable. Erosional contacts separate mud‐rich shelf facies from sequence‐capping sandstones. We infer that these erosion surfaces were generated by episodic flexural tectonism, which also generated the accommodation and sediment supply for Roper sequences.  相似文献   

Trace elements and polycyclic aromatic hydrocarbons (PAHs) concentrations in deep Gulf of Mexico sediments     

Terry L. Wade  Yousra Soliman  Stephen T. Sweet  Gary A. Wolff  Bobby J. Presley 《Deep Sea Research Part II: Topical Studies in Oceanography》2008,55(24-26):2585

The concentrations of polycyclic aromatic hydrocarbons (PAHs) and trace elements were determined for surface (top 2 cm) sediment samples collected during the deep Gulf of Mexico benthos (DGoMB) study .These elements and compounds are known to be toxic to organisms at high concentrations and may affect biological communities. There is no indication of major anthropogenic input of the elements Be, Co, Cr, Fe, Si, Tl, V, K, Mg, Ca, Sr and Zn, based on normalization to Al. The concentrations of these metals in the sediment are a function of the relative amounts of trace-metal-rich Mississippi River-derived silicate material and trace-metal-poor plankton-derived carbonate. This is not true for the elements Ba, Ni, Pb, Cd, As, Cu and Mn, whose concentrations show considerable scatter when normalized to Al and a general enrichment. On a normalized basis, Mn is enriched 5–10 fold, Cu and Ni 2–3 fold and Pb 2 fold over Mississippi River-derived material. These enrichments are likely the result of remobilization of metals from depths in the sediment column where reducing conditions exist. The Ba concentrations at selected sites are higher than those of average clay-rich sediments, but are typical of sediments from near oil well platforms in the northern Gulf of Mexico. In the case of Ba, it seems likely that the enrichments, as high as a factor of 10, are due to disposal of oil well drilling mud. The Ba-enriched samples are from the three shallowest water sites in the Mississippi Trough (sites MT1, 2 and 3) and from site C1 and WC5. All are in an area of intense petroleum exploration and development. PAH concentrations are also elevated at MT1, MT3 and C1. The total PAH concentration ranged from not detected (ND) to 1033 ng/g with a mean of 140 ng/g. Even at the sites most enriched in PAHs and trace elements, the concentrations are not at the levels expected to adversely affect the biota. However, these predicted non-effects are based on research using mostly near-shore estuarine species, not on the indigenous species at the sampling sites.  相似文献   

Experimental calibration of oxygen isotope fractionation between quartz and zircon   总被引：3，自引：0，他引：3  

Dustin Trail  Ilya N. Bindeman  E. Bruce Watson  Axel K. Schmitt 《Geochimica et cosmochimica acta》2009,73(23):7110-7126

We report the results of an experimental calibration of oxygen isotope fractionation between quartz and zircon. Data were collected from 700 to 1000 °C, 10–20 kbar, and in some experiments the oxygen fugacity was buffered at the fayalite–magnetite–quartz equilibrium. Oxygen isotope fractionation shows no clear dependence on oxygen fugacity or pressure. Unexpectedly, some high-temperature data (900–1000 °C) show evidence for disequilibrium oxygen isotope partitioning. This is based in part on ion microprobe data from these samples that indicate some high-temperature quartz grains may be isotopically zoned. Excluding data that probably represent non-equilibrium conditions, our preferred calibration for oxygen isotope fractionation between quartz and zircon can be described by: This relationship can be used to calculate fractionation factors between zircon and other minerals. In addition, results have been used to calculate WR/melt–zircon fractionations during magma differentiation. Modeling demonstrates that silicic magmas show relatively small changes in δ¹⁸O values during differentiation, though late-stage mafic residuals capable of zircon saturation contain elevated δ¹⁸O values. However, residuals also have larger predicted melt–zircon fractionations meaning zircons will not record enriched δ¹⁸O values generally attributed to a granitic protolith. These results agree with data from natural samples if the zircon fractionation factor presented here or from natural studies is applied.  相似文献   

Interaction between aeolian, fluvial and playa environments in the Permian Upper Rotliegend Group, UK southern North Sea   总被引：7，自引：0，他引：7  

Sweet 《Sedimentology》1999,46(1):171-187

The Permian Upper Rotliegend Group in offshore UK Quadrants 42, 43, 47 and 48 comprises a sequence of mixed aeolian/fluvial/playa deposits. These deposits are up to 300 m thick and contain a record of the interaction between desert fluvial systems and adjacent aeolian and playa environments. The relative dominance of water vs. wind transport and deposition in this stratigraphic package was a function of fluctuations in the discharge of ephemeral fluvial systems and changes in water table/playa level driven by a combination of climatic change and syndepositional tectonics. The Rotliegend sedimentary record is punctuated by numerous surfaces recording erosion by wind and water. The origin of these surfaces is mostly climatic, with periods of increased runoff resulting in fluvial incision, especially near active faults. During periods of reduced runoff, wind erosion of fluvial deposits occurred, with fluvially derived sand being reworked into expanding aeolian dune fields. Wind erosion also occurred as a rising water table isolated dunes from their sediment supply, resulting in deflation of dunes down to the water table. These surfaces formed in a basin that was subsiding. Thus, even in a background of overall increasing accommodation space, climatically driven falls in the water table allowed for periods of erosion. The occurrence of significant erosion, especially near syndepositional fault zones, resulted in a sedimentary record that shows pronounced lateral as well as vertical facies variations.  相似文献   

ADMESH:?An advanced, automatic unstructured mesh generator for shallow water models     

Colton J. Conroy  Ethan J. Kubatko  Dustin W. West 《Ocean Dynamics》2012,62(10-12):1503-1517

In this paper, we present the development and application of a two-dimensional, automatic unstructured mesh generator for shallow water models called Admesh. Starting with only target minimum and maximum element sizes and points defining the boundary and bathymetry/ topography of the domain, the goal of the mesh generator is to automatically produce a high-quality mesh from this minimal set of input. From the geometry provided, properties such as local features, curvature of the boundary, bathymetric/topographic gradients, and approximate flow characteristics can be extracted, which are then used to determine local element sizes. The result is a high-quality mesh, with the correct amount of refinement where it is needed to resolve all the geometry and flow characteristics of the domain. Techniques incorporated include the use of the so-called signed distance function, which is used to determine critical geometric properties, the approximation of piecewise linear coastline data by smooth cubic splines, a so-called mesh function used to determine element sizes and control the size ratio of neighboring elements, and a spring-based force equilibrium approach used to improve the element quality of an initial mesh obtained from a simple Delaunay triangulation. Several meshes of shallow water domains created by the new mesh generator are presented.  相似文献   

Validation of Walk Scores and Transit Scores for estimating neighborhood walkability and transit availability: a small-area analysis     

Dustin T. Duncan  Jared Aldstadt  John Whalen  Steven J. Melly 《GeoJournal》2013,78(2):407-416

We investigated the validity of Walk Scores and Transit Scores from the Walk Score website using several objective geographic information systems (GIS) measures of neighborhood walkabiltiy and transit availability based on 400- and 800-m street network buffers. Address data come from the 2008 Boston Youth Survey Geospatial Dataset, a school-based sample of public high school students in Boston, MA with complete residential address information (n = 1,292). GIS data were used to create multiple objective measures of neighborhood walkability and transit availability. We also obtained Walk Scores and Transit Scores. We calculated Spearman correlations of Walk Scores and Transit Scores with the GIS neighborhood walkability/transit availability measures as well as Spearman correlations accounting for spatial autocorrelation. Several significant correlations were observed between Walk Score and 400-m buffer GIS measures of neighborhood walkability; all significant correlations were found for the 800-m buffer. All correlations between Transit Scores and GIS measures of neighborhood transit availability were also significant (all p < 0.0001). However, the magnitude of correlations varied by the GIS measure and neighborhood definition. Relative to the 400-m buffer, correlations for the 800-m buffer were higher. This study suggests that Walk Score is a good, convenient tool to measure certain aspects of neighborhood walkability and transit availability (such as density of retail destinations, density of recreational open space, intersection density, residential density and density of subway stops). However, Walk Score works best at larger spatial scales.  相似文献