排序方式： 共有51条查询结果，搜索用时 218 毫秒
1.
A simple parameter estimation procedure, designated as integration-based estimation (IBE), was introduced to determine the hydraulic properties of an aquifer using slug test models subjected to certain flow geometries such as radial and spherical flows. The basic idea behind the proposed IBE approach is to link an integration value at pre-defined normalized head levels for field data with that of a theoretical type curve. The IBE method removes the need for the implementation of the classical graphical matching process which would be ineffective to acquire aquifer parameters for non-ideal aquifer conditions. As the second aspect of this study, a new decision tool was suggested to determine the suitable slug test model to be utilized for the site data since diagnosing the flow character properly is of crucial importance for following a convenient analysis procedure. The estimation performance and limitation of the proposed IBE method were tested for several slug test scenarios including radial and spherical flow models with a number of synthetically generated data sets as well as a field application. Results reveal that the IBE together with the identification methodology not only is able to retrieve aquifer parameters as reliable as the existing techniques in the literature but also diagnoses the flow character precisely as demonstrated in this study. 相似文献
2.
The East Anatolian Fault Zone is a continental transform fault accommodating westward motion of the Anatolian fault. This study aims to investigate the source properties of two moderately large and damaging earthquakes which occurred along the transform fault in the last two decades using the teleseismic broadband P and SH body waveforms. The first earthquake, the 27 June 1998 Adana earthquake, occurred beneath the Adana basin, located close to the eastern extreme of Turkey’s Mediterranean coast. The faulting associated with the 1998 Adana earthquake is unilateral to the NE and confined to depths below 15 km with a length of 30 km along the strike (53°) and a dipping of 81° SE. The fixed-rake models fit the data less well than the variable-rake model. The main slip area centered at depth of about 27 km and to the NE of the hypocenter, covering a circular area of 10 km in diameter with a peak slip of about 60 cm. The slip model yields a seismic moment of 3.5?×?1018 N-m (Mw???6.4). The second earthquake, the 1 May 2003 Bingöl earthquake, occurred along a dextral conjugate fault of the East Anatolian Fault Zone. The preferred slip model with a seismic moment of 4.1?×?1018 N-m (Mw???6.4) suggests that the rupture was unilateral toward SE and was controlled by a failure of large asperity roughly circular in shape and centered at a depth of 5 km with peak displacement of about 55 cm. Our results suggest that the 1998 Adana earthquake did not occur on the mapped Göksun Yakap?nar Fault Zone but rather on a SE dipping unmapped fault that may be a split fault of it and buried under the thick (about 6 km) deposits of the Adana basin. For the 2003 Bingöl earthquake, the final slip model requires a rupture plane having 15° different strike than the most possible mapped fault. 相似文献
3.
Ahmet Yıldız Can Başaran Metin Bağcı Ayla Gümüş Feyzullah Ekrem Çonkar Yusuf Ulutürk Hüseyin Ali Yalım 《Arabian Journal of Geosciences》2018,11(8):175
Afyonkarahisar is a very important geothermal province of western Anatolia and has low and medium enthalpy geothermal areas. This study has been carried out for the preparation of distribution maps of soil gases (radon and carbon dioxide) and shallow soil temperature and the exploration of permeable tectonic regions associated with geothermal systems and reveal the origins of radon and carbon dioxide gases. The western district of the study area is characterized by the high radon concentration (168.30 kBq/m3), carbon dioxide ratio (0.30%), and soil temperature (21.0 °C) values. Fethibey and Demirçevre faults, which allow the circulation of geothermal fluids, have been detected in the distribution maps of radon, carbon dioxide, and shallow depth temperature and the directions of the curves in these maps correspond to the strikes of Demirçevre faults. The effect of the fault plays an important role in the change of carbon dioxide concentration along the W-E directional geological section prepared to determine the change of soil gas and shallow depth temperature values depending on lithological differences, fault existence, and geothermal reservoir depth. On the other hand, it was determined that Rn222 concentration and soil temperature changed as a function of geothermal reservoir depth or lithological difference. Tuffs in Köprülü volcano-sedimentary units are the main source of radon due to their higher uranium contents. Besides, the carbon dioxide in Ömer–Gecek soils has geothermal origin because of the highest carbon dioxide content (99.3%) in non-condense gas. The similarities in patterns of soil temperature, radon, and carbon dioxide indicate that the variation in soil temperatures is related to radon and carbon dioxide emissions. It is concluded that soil gas and temperature measurements can be used to determine the active faults in the initial stage of geothermal exploration successfully. 相似文献
4.
This paper deals with the lower order (first four) nonstationary statistical moments of the response of linear systems with random stiffness and random damping properties subject to random nonstationary excitation modeled as white noise multiplied by an envelope function. The method of analysis is based on a Markov approach using stochastic differential equations (SDE). The linear SDE with random coefficients subject to random excitation with deterministic initial conditions are transformed to an equivalent nonlinear SDE with deterministic coefficients and random initial conditions subject to random excitation. In this procedure, new SDE with random initial conditions, deterministic coefficients and zero forcing functions are introduced to represent the random variables. The joint statistical moments of the response are determined by considering an augmented dynamic system with state variables made up of the displacement and velocity vectors and the random variables of the structural system. The zero time-lag joint statistical moment equations for the augmented state vector are derived from the Itô differential formula. The statistical moment equations are ordinary nonlinear differential equations where hierarchy of moments appear. The hierarchy is closed by the cumulant neglect closure method applied at the fourth order statistical moment level. General formulation is given for multi-degree-of-freedom (MDOF) systems and the performance of the method in problems with nonstationary excitations and large variabilities is illustrated for a single-degree-of-freedom (SDOF) oscillator. 相似文献
5.
A helical surge (S 72, W 90) was recorded by a monochromatic filter at the University Observatory of Istanbul. It is a significient one at a very high latitude and without any center of activity. A sequence of the filtergrams showed some condensed points from which the motions of the plasma are traced. Different velocities were determined on each of the branches of the helical surge during its evolution. The surge reached its maximum height of 298 000 km and the maximum velocity of this upper region was 250 km s–1. 相似文献
6.
In this study, landslide susceptibility assessments were achieved using logistic regression, in a 523 km2 area around the Eastern Mediterranean region of Southern Turkey. In reliable landslide susceptibility modeling, among others, an appropriate landslide sampling technique is always essential. In susceptibility assessments, two different random selection methods, ranging 78–83% for the train and 17–22% validation set in landslide affected areas, were applied. For the first, the landslides were selected based on their identity numbers considering the whole polygon while in the second, random grid cells of equal size of the former one was selected in any part of the landslides. Three random selections for the landslide free grid cells of equal proportion were also applied for each of the landslide affected data set. Among the landslide preparatory factors; geology, landform classification, land use, elevation, slope, plan curvature, profile curvature, slope length factor, solar radiation, stream power index, slope second derivate, topographic wetness index, heat load index, mean slope, slope position, roughness, dissection, surface relief ratio, linear aspect, slope/aspect ratio have been considered. The results showed that the susceptibility maps produced using the random selections considering the entire landslide polygons have higher performances by means of success and prediction rates. 相似文献
7.
H. Çakmak 《Experimental Astronomy》2014,37(3):539-553
The areas of sunspots are the most prominent feature of the development of sunspot groups. Since the size of sunspot areas depend on the strength of the magnetic field, accurate measurements of these areas are important. In this study, a method which allows to measure true areas of the sunspots is introduced. A Stonyhurst disk is created by using a computer program and is coincided with solar images. By doing this, an accurate heliographic coordinate system is formed. Then, the true area of the whole sunspot group is calculated in square degrees with the aid of the heliographic coordinates of each picture element forming the image of the sunspot group. This technique’s use is not limited with sunspot areas only. The areas of the flare and filaments observed on the chromospheric disk can also be calculated with the same method. In addition to this, it is possible to calculate the area of any occurrence on the solar disk, whether it is related to an activity or not. 相似文献
8.
Ömer Emre Tamer Y. Duman Selim Özalp Fuat Şaroğlu Şeyda Olgun Hasan Elmacı Tolga Çan 《Bulletin of Earthquake Engineering》2018,16(8):3229-3275
We have updated the active fault map of Turkey and built its database within GIS environment. In the study, four distinct active fault types, classified according to geochronological criteria and character, were delineated on the 1:25,000 base map of Turkey. 176 fault segments not included in the former active fault map of Turkey, have been identified and documented. We infer that there are 485 single fault segments which are substantially potential seismic sources. In total 1964 active-fault base-maps were transferred into the GIS environment. Each fault was attributed with key parameters such as class, activity, type, length, trend, and attitude of fault plane. The fault parameters are also supported by slip-rate and seismogenic depth inferred from available GPS, seismological and paleoseismological data. Additionally, expected maximum magnitude for each fault segment was estimated by empirical equations. We present the database in a parametric catalogue of fault segments to be of interest in earthquake engineering and seismotectonics. The study provides essential geological and seismological inputs for regional seismic hazard analysis of all over Turkey and its vicinity. 相似文献
9.
In the paper a recently proposed method for damage localization and quantification of RC-structures from response measurements is tested on experimental data. The method investigated requires at least one response measurement along the structures and the ground surface acceleration. Further, the two lowest time-varying eigenfrequencies of the structure must be identified. The data considered are sampled from a series of three RC-frame model tests performed at the structural laboratory at Aalborg University, Denmark during the autumn of 1996. The frames in the test series were exposed to two or three series of ground motions of increasing magnitude. After each of these runs the damage state of the frame was examined and each storey of the frame were classified into one of the following six classifications: undamaged, cracked, lightly damaged, damaged, severely damaged or collapse. During each of the ground motion events the storey accelerations were measured by accelerometers. After application of the last earthquake sequence to the structure the frames were cut into pieces and each of the beams and columns was statically tested and damage assessment was performed using the obtained stiffnesses. The damage in the storeys determined by the suggested method was then compared to the damage classification from the visual inspection as well as the static tests. It was found that especially in the cases where the damage is concentrated in a certain area of the structure a very good damage assessment is obtained using the suggested method. © 1998 John Wiley & Sons, Ltd. 相似文献
10.
Landslide susceptibility mapping of the Sera River Basin using logistic regression model 总被引：2，自引：1，他引：1
Nussaïbah B. Raja Ihsan Çiçek Necla Türkoğlu Olgu Aydin Akiyuki Kawasaki 《Natural Hazards》2017,85(3):1323-1346
Of the natural hazards in Turkey, landslides are the second most devastating in terms of socio-economic losses, with the majority of landslides occurring in the Eastern Black Sea Region. The aim of this study is to use a statistical approach to carry out a landslide susceptibility assessment in one area at great risk from landslides: the Sera River Basin located in the Eastern Black Sea Region. This paper applies a multivariate statistical approach in the form of a logistics regression model to explore the probability distribution of future landslides in the region. The model attempts to find the best fitting function to describe the relationship between the dependent variable, here the presence or absence of landslides in a region and a set of independent parameters contributing to the occurrence of landslides. The dependent variable (0 for the absence of landslides and 1 for the presence of landslides) was generated using landslide data retrieved from an existing database and expert opinion. The database has information on a few landslides in the region, but is not extensive or complete, and thus unlike those normally used for research. Slope, angle, relief, the natural drainage network (including distance to rivers and the watershed index) and lithology were used as independent parameters in this study. The effect of each parameter was assessed using the corresponding coefficient in the logistic regression function. The results showed that the natural drainage network plays a significant role in determining landslide occurrence and distribution. Landslide susceptibility was evaluated using a predicted map of probability. Zones with high and medium susceptibility to landslides make up 38.8 % of the study area and are located mostly south of the Sera River Basin and along streams. 相似文献