A metrologic method of anomaly field amplitude bottom reduction in undersampled geomagnetic marine surveys     

Faggioni  Osvaldo  Beverini  Nicolò  Carmisciano  Cosmo  Giori  Italiano 《Marine Geophysical Researches》2001,22(2):63-79

We show the results obtained by means of a seabed reduction technique on the intensity of geomagnetic anomaly fields applied to a synthetic case and then to the real case of a geomagnetic survey of eastern Ligurian Sea (Italy). The eastern Ligurian Sea has very intense short waves anomaly fields and a sea bed that varies greatly in depth. As a result the geomagnetic space signal is characterized by a very large spectral content; in these conditions it is not possible to obtain a full sampled marine survey and vertical continuation analytic procedures and standard numerical bottom reduction based on a single vertical incremental parameter, whichever is applicable, fails to give accurate results. The present technique, which has been fine-tuned over 4 years of experimentation in environmental researchs, aims to provide a simple and efficient means to reduce the distortion of geomagnetic anomalies field caused by the variation of distance between survey plane and magnetic outcrop source position. The compensation procedure is based on evaluation, by comparison of two measurements carried out at different altitudes, of the mean vertical increment typical of each anomaly field principal frequency component bands. The component anomaly fields are then corrected by application of the corresponding vertical increments and lastly, the anomaly geomagnetic field reduced to the sea-bed is computed as Inverse Fourier Transform of a spectrum built as synthesis of the component anomaly fields' spectra. The results obtained have shown a notable increase in definition of anomaly field intensity without the production of appreciable distortions or false geomagnetic echoes. This revised version was published online in November 2006 with corrections to the Cover Date.  相似文献   

The Bayesian detection of discontinuities in a polynomial regression and its application to the cycle-slip problem   总被引：4，自引：1，他引：3  

Maria Clara de Lacy  Mirko Reguzzoni  Fernando Sansò  Giovanna Venuti 《Journal of Geodesy》2008,82(9):527-542

This paper deals with the problem of detecting and correcting cycle-slips in Global Navigation Satellite System (GNSS) phase data by exploiting the Bayesian theory. The method is here applied to undifferenced observations, because repairing cycle-slips already at this stage could be a useful pre-processing tool, especially for a network of permanent GNSS stations. If a dual frequency receiver is available, the cycle-slips can be easily detected by combining two phase observations or phase and range observations from a single satellite to a single receiver. These combinations, expressed in a distance unit form, are completely free from the geometry and depend only on the ionospheric effect, on the electronic biases and on the initial integer ambiguities; since these terms are expected to be smooth in time, at least in a short period, a cycle-slip in one or both the two carriers can be modelled as a discontinuity in a polynomial regression. The proposed method consists in applying the Bayesian theory to compute the marginal posterior distribution of the discontinuity epoch and to detect it as a maximum a posteriori (MAP) in a very accurate way. Concerning the cycle-slip correction, a couple of simultaneous integer slips in the two carriers is chosen by maximazing the conditional posterior distribution of the discontinuity amplitude given the detected epoch. Numerical experiments on simulated and real data show that the discontinuities with an amplitude 2 or 3 times larger than the noise standard deviation are successfully identified. This means that the Bayesian approach is able to detect and correct cycle-slips using undifferenced GNSS observations even if the slip occurs by one cycle. A comparison with the scientific software BERNESE 5.0 confirms the good performance of the proposed method, especially when data sampled at high frequency (e.g. every 1 s or every 5 s) are available.  相似文献   

Hamiltonian perturbation theory on a manifold     

Francesco Fassò 《Celestial Mechanics and Dynamical Astronomy》1995,62(1):43-69

This paper deals with Hamiltonian perturbation theory for systems which, like Euler-Poinsot (the rigid body with a fixed point and no torques), are degenerate and do not possess a global system of action-angle coordinates. It turns out that the usual methods of perturbation theory, which are essentially local being based on the construction of normal forms within the domain of a local coordinate system, are not immediately usable to study perturbations of these systems, since degeneracy makes impossible to control that the system does not fall into a singularity of the coordinates. To overcome this difficulty, we develop a global formulation of Hamiltonian perturbation theory, in which the normal forms are globally defined on the phase space manifold. The key for this study lies in the geometry of the fibration by the invariant tori of an integrable degenerate Hamiltonian system, which is described by some generalizations of the Liouville-Arnol'd theorem and is reviewed in the paper. As an application, we provide a global formulation of Nekhoroshev's theorem on the stability for exponentially long times.  相似文献   

Hypersensitization of Kodak infrared plates: Results of some chemical methods and pre-exposure     

F. Bònoli  F. Fusi Pecci  E. Milandri 《Astrophysics and Space Science》1981,79(1):191-201

Tests have been carried out on Kodak Spectroscopic Plates Type I-N, in order to find a treatment which could be easily applied to the infrared plates to be used with the Loiano 152 cm,f/8, Ritchey-Chrétien telescope. Different techniques have been tested, not only with the aim of achieving the higher speed gain, but also to obtain the better uniformity and reproducibility. Our results suggest that the advantages of preexposure techniques are underestimated in this respect. Furthermore, we find that blue and infrared preexposures (at 0.8 s) give different results, suggesting a different degree of dispersity in the latent image produced by pre-exposure in the two cases.Baths including both ammonia and Ag-compounds provide the higher speed gains, but the increment of the fog is often non-uniform and/or very high. The best results have been obtained with baths including AgNO₃ and AgCl. The rejuvenation process found by Sanduleak and the results obtained by Jenkins and Farnell on the reversibility of the gains due to silver-nitrate baths have been confirmed.  相似文献   

IAG Newsletter     

Gyula Tòth 《Journal of Geodesy》2005,79(6-7):407-412

  相似文献   

Geochemical characteristics of mineral air particles emitted inside a clay atomisation plant which introduces waste recycling processes     

V Sanfelix  ET Gòmez  MM Jordán  T Sanfeliu  S Pallarés  AB Vicente 《Environmental Geology》2005,47(6):811-819

The objective of this work is to assess the concentrations of three factions of air particles (settable particles, TSP and PM10) and the levels of several toxic elements in a clay atomisation industry through aerosol sampling at several points inside an industrial plant. Mechanical activities, which produce diffuse emissions, are the main process of discharge of particles in both indoor and outdoor workplace environments in the atomisation plant. The levels of As, Cd, Pb, Zn, Ba and Ni increase in the zones with higher concentrations of particles and lower ventilation. The concentrations of As and F are not influenced by the recycling processes. The levels of Cd and Pb do not show great enrichment in air particles collected inside the atomisation plant although the content of both elements is associated with ceramic muck recycling. Finally, the content of B in waste water is mainly transferred in gaseous phase to the atmosphere during the process of drying by atomisation.  相似文献   

Quantitative 3D imaging of partially saturated granular materials under uniaxial compression     

Milatz  Marius  Hüsener  Nicole  Andò  Edward  Viggiani  Gioacchino  Grabe  Jürgen 《Acta Geotechnica》2021,16(11):3573-3600

Acta Geotechnica - Gauging the mechanical effect of partial saturation in granular materials is experimentally challenging due to the very low suctions resulting from large pores. To this end, a...  相似文献   

Shear wave propagation along infinite slopes: A theoretically based numerical study     

C. di Prisco  M. Pastor  F. Pisanò 《国际地质力学数值与分析法杂志》2012,36(5):619-642

In this paper, the seismic response of ‘infinitely’ long slopes is numerically analysed via the formulation of a 1D analytical/numerical model, in which the soil mechanical behaviour is assumed to be elasto‐perfectly viscoplastic and simple shear (SS) kinematical constraints are imposed. In order to simplify the problem, a theoretically based procedure to set up a fully 1D shear constitutive model is defined, within which the mechanical response of a multiaxial relationship is condensed. The use of a 1D shear constitutive model is aimed at reducing the number of unknowns and, therefore, the computational costs. In particular, the case of the Mohr–Coulomb yield criterion is considered, while an enhanced Taylor–Galerkin finite element algorithm is employed to simulate the seismic wave propagation within the soil stratum. The proposed ‘condensation’/calibration procedure captures both the ‘pseudo’‐hardening pre‐failure behaviour and the influence of dilation on the occurrence of strain‐localization, which characterize, under SS conditions, the static response of virgin perfectly plastic soils. The effectiveness of the conceived method is shown with reference to freshly deposited deposits, while, in the case of highly overconsolidated strata, some difficulties arise because of the brittle behaviour induced both by unloading and non‐associativeness. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

A comparison of total precipitation values estimated from measurements and a 1D cloud model     

Z. Aslan  M. Kadödòlu  I. Gültepe 《Annales Geophysicae》1995,13(5):567-571

The purpose of this study is to establish a relation between observed total precipitation values and estimations from a one-dimensional diagnostic cloud model. Total precipitation values estimated from maximum liquid water content, maximum vertical velocity, cloud top height, and temperature excess are also used to provide an equation for the total precipitation prediction. Data for this study were collected in Istanbul during the autumns of 1987 and 1988. The statistical models are developed with multiple regression technique and then comparatively verified with independent data for 1990. The multiple regression coefficients are in the range of 75% to 80% in the statistical models. Results of the test showed that total precipitation values estimated from the above techniques are in good agreement, with correlation coefficient between 40% and 46% based on test data for 1990.  相似文献   

Cobalt zoning in microscopic pyrite from Kamoto,Republic of the Congo (Kinshasa)     

P. Bartholomé  F. Katekesha  J. Lòpez Ruiz 《Mineralium Deposita》1971,6(3):167-176

The Kamoto deposit consists of two stratiform orebodies separated by a barren sedimentary unit. It is a copper and cobalt deposit, the main features of which are summarized in the first part of the paper. Above the upper orebody, dolostone beds are found, where pyrite is the only sulfide mineral. This pyrite was investigated with the help of a microprobe: all idiomorphic grains were found to be surrounded by a well-defined rim, where the cobalt content reaches 4%; framboidal grains were also found to be heterogeneous with respect to cobalt. The distribution of nickel and copper is described. These observations afford one more evidence that post-depositional events played an important role in the Mine Series of Katanga, especially with regard to heavy metals geochemistry.

---

Resume Le gisement de Kamoto est constitué de deux corps minéralisés stratiformes séparés par une unité sédimentaire stérile. C'est un gisement de cuivre et de cobalt dont les principales caractéristiques sont brièvement résumées. Audessus du corps minéralisé supérieur, on trouve des couches de dolomie, où la pyrite est le seul sulfure présent. Cette pyrite a été étudiée à l'aide d'une microsonde: tous les grains idiomorphes y sont entourés d'une bordure bien nette, où la teneur en cobalt atteint 4%; les grains d'apparence framboïdale sont également hétérogènes au point de vue de leur teneur en cobalt. La distribution du nickel et du cuivre est décrite. Ces observations apportent um témoignage supplémentaire de l'importance des événements postérieurs au dépôt dans la «Série des Mines» katangaise, tout spécialement en ce qui concerne la géochimie des métaux lourds. Elles démontrent que le «système» constitué par la roche sédimentaire est resté ouvert pendant un certain temps après la sédimentation.

  相似文献