Cycling of trace metals (Mn, Fe, Mo, U, V, Cr) in deep pore waters of intertidal flat sediments     

Melanie Beck  Olaf Dellwig  Hans-Jürgen Brumsack 《Geochimica et cosmochimica acta》2008,72(12):2822-2840

Trace metals (Mn, Fe, Mo, U, Cr, V) were studied in pore waters of an intertidal flat located in the German Wadden Sea. The study system is an example of a permeable tidal flat system where pore water exchange is affected by tidal driven pressure gradients besides diffusion. Permanently installed in situ samplers were used to extract pore waters down to 5 m depth throughout one year. The samplers were either located close to the tidal flat margin or in central parts of the tidal flat. Despite dynamic sedimentological and hydrological conditions, the general trends with depth in deep tidal flat pore waters are remarkably similar to those observed in deep sea environments. Rates of trace metal cycling must be comparably large in order to maintain the observed pore water profiles. Trace metals further show similar general trends with depth close to the margin and in central parts of the tidal flat. Seasonal sampling revealed that V and Cr vary concurrent with seasonal changes in dissolved organic carbon (DOC) concentration. This effect is most notable close to the tidal flat margin where sulphate, DOC, and nutrients vary with season down to some metres depth. Seasonal variations of Mn, Fe, Mo, and U are by contrast limited to the upper decimetres of the sediment. Their seasonal patterns depend on organic matter supply, redox stratification, and particulate matter deposited on sediment surfaces. Pore water sampling within one tidal cycle provides evidence for pore water advection in margin sediments. During low tide pore water flow towards the creekbank is generated by a hydraulic gradient suggesting that deep pore waters may be seeping out of creekbank sediments. Owing to the enrichment of specific elements like Mn in pore water compared to sea water, seeping pore waters may have an impact on the chemistry of the open water column. Mass balance calculations reveal that the impact of deep pore waters on the Mn budget in the open water column is below 4%. Mn deep pore water discharge of the whole Wadden Sea is estimated to be about 9% of the total dissolved riverine Mn input into the Southern North Sea.  相似文献   

Oligocene sequence stratigraphy and basin development in the Danish North Sea sector based on log interpretations     

Mette Danielsen  Olaf Michelsen  Ole Rn Clausen 《Marine and Petroleum Geology》1997,14(7-8)

Five sequences are defined in the Oligocene succession of the Danish North Sea sector. Two of the sequences, 4.1a and 4.3, have been identified onshore Denmark.Two types of prograding lowstand deposits are recognized. Sand-dominated deposits occur proximally, comprising sharp-based forced regressive deposits covered with prograding low-stand deposits. Clay-dominated prograding lowstand deposits occur distally in the sequences. The highstand deposits are proximally represented by thick prograding sandy deposits and distally by thin and condensed intervals.The main sediment input direction was from the north and the northeast. A succession oif lithofacies, from shallow marine facies dominated by sand to outer shelf facies dominated by clay, is mapped in each of the sequences. An overall southward progradation of the shoreline took place during the Oligocene, interrupted only by minor shoreline retreats.  相似文献   

Benthic Standing Stock and Metabolic Activity in the Bathyal Red Sea from 17°N to 27°N     

Olaf  Pfannkuche 《Marine Ecology》1993,14(1):67-79

  相似文献   

A novel time-series station in the Wadden Sea (NW Germany): First results on continuous nutrient and methane measurements     

Maik Grunwald  Olaf Dellwig  Gerd Liebezeit  Bernhard Schnetger  Rainer Reuter  Hans-Jürgen Brumsack 《Marine Chemistry》2007

In autumn 2002 a time-series station was installed in the tidal inlet between the Islands of Langeoog and Spiekeroog (Southern North Sea, NW Germany) to continuously measure physical, chemical, and meteorological parameters, even during extreme weather conditions (gale-force storms, drifting ice). Inside the pole of the station sensor tubes are installed in direction of the prevailing tidal currents. The tubes are equipped with hydrographic sensors (pressure, temperature, conductivity) and allow retrieval of water for nutrient analysis by automated instruments located inside the pole. Dissolved methane and the nutrients ammonia, nitrite, nitrate, phosphate, and silicate are measured at the station.  相似文献   

Understanding El Niño — The importance of Grey Literature in Coastal Ecosystem Research and Management     

Sven Thatje  Jürgen Laudien  Olaf Heilmayer  Cornelia E. Nauen 《Marine Policy》2007

Access to information about past states of the environment and social systems is fundamental to understand, and cope with, the challenges of climate change and over-exploitation of natural resources at the onset of the 21st century. The loss of (old) data is a major threat to understanding better and mitigating long-term effects of human activities and anthropogenic changes to the environment. Although this is intuitively evident for old and local literature of any kind, even present-day international publishing of papers without the underlying raw data makes access to basic information a crucial issue. Here, we summarise experience resulting from a EU-funded International Science & Technology Cooperation (INCO) project (CENSOR) addressing Coastal Ecosystem Research and Management in the El Niño Southern Oscillation (ENSO) context. We show that indeed “Grey Literature” is still one of the most important sources of knowledge about natural science research and management of natural resource systems in Latin American countries. We argue that public archiving of original data of present-day research and old (Grey) Literature and easy public access are important for appreciating today's global environmental challenges caused by human activities, both past and present.  相似文献   

Aluminium species distribution during mixing of acid coal and slate mine drainage with neutral stream waters     

Reimer Herrmann  Isolde Baumgartner 《International Journal of Earth Sciences》1992,81(3):759-767

We measured the spatial variation of aluminium concentrations and computed its species distribution before and during mixing of acid mine drainage containing waters with near neutral receiving waters. Acid mine drainage was collected from the Loquitz Creek, Thuringia, Germany, and Garvey Creek, Westland, New Zealand, which drain slate mine workings and coal mine workings, resp. The acidneutralizing capacity (ANC) of the receiving streams and the mixing with waters having low Al-concentrations cause a decrease of aluminium concentrations below the confluence. Depending on volumes and ANCs involved, the content of free Al and sulphate bound Al decreases after mixing in favour of organic and hydroxide bound Al. In addition, below the junction of the Loquitz Creek and the Aue Creek with its high ANC, we observe the precipitation of aluminium hydroxides and Al hydroxysulphates.

---

Zusammenfassung Wir haben die räumliche Änderung der Aluminiumkonzentrationen vor und nach der Mischung von Flußwasser, versauert durch Bergwerksabwässer, mit nahezu neutralem Wasser der Vorfluter gemessen und haben dazu die Speziesverteilung berechnet. Saure Bergwerksabwässer sickern aus Halden eines Schiefertagebaus in Thüringen in die Loquitz ebenso wie aus Halden eines Kohletagebaus in den Garvey Creek, Westland, Neuseeland. Die Säuren-Neutralisierungskapazität der Vorfluter und die Mischung mit Al-armem Wasser bewirken eine Abnahme der Aluminiumkonzentrationen nach dem Zusammenfluß. In Abhängigkeit von beteiligten Abflüssen und Säuren-Neutralisierungskapazitäten nimmt der Gehalt an freiem Aluminium und sulfatgebundenem Aluminium nach der Mischung zugunsten von organisch- und hydroxy-gebundenem Aluminium ab. Ferner beobachten wir unterhalb des Zusammenflusses von Loquitz und Aue, der eine hohe Säuren-Neutralisierungskapazität eigen ist, eine Ausfällung von Aluminiumhydroxyden und Aluminiumhydroxysulfaten.

---

Résumé Nous avons mesuré la variation spatiale de la teneur en Al et calculé la distribution de ses différentes formes dans deux cours d'eau différents, qui reçoivent des eaux acides venant de mines situées sur leur cours. Ces mesures ont été faites d'une part sur le cours du Loquitz (Thuringe-Allemagne) qui reçoit des aux acides venant d'une mine d'ardoise et d'autre part sur le cours du Garvey (Westland - Nouvelle Zélande) qui reçoit les eaux d'une mine de charbon. Pour chaque cours d'eau, les mesures ont été faites en amont de la source d'apport, puis en aval, c'est-à-dire après le mélange avec les eaux acides. La capacité de neutralisation des acides (ANC) des eaux des cours d'eau récepteurs et la basse teneur en Al des eaux d'apport provoquent une diminution de la teneur en Al après le mélange. Dans une mesure liée aux volumes en jeu et à l'ANC, la teneur en Al libre et en Al lié au sulfate diminue près le mélange au profit de l'Al lié soit à des substances organiques, soit à des hydroxydes. De plus, en aval du confluent du Loquitz et de l'Aue, rivière à ANC élevé, nous observons la précipitation d'hydroxydes d'Al et d'hydroxisulfates d'Al.

---

, , - , . , , Garvey Creek, Westland, . , , , , , , , , , . , , , .

  相似文献   

Origin of Pleistocene-Holocene ashes of the Russian northeast based on trace and rare earth element data     

V. G. Sakhno  L. I. Bazanova  O. Yu. Glushkova  I. V. Melekestsev  V. V. Ponomareva  A. A. Surnin  J. Olaf 《Doklady Earth Sciences》2006,411(9):1351-1356

  相似文献   

Weathering characteristics of arctic islands in northern Norway     

yvind Paasche  Jrund Raukleiv Strmse  Svein Olaf Dahl  Henriette Linge 《Geomorphology》2006,82(3-4):430-452

The arctic islands of the Lofoten-Vesterålen archipelago in northern Norway have a wide distribution of weathered land surfaces commonly located above 250 m with several apparent similarities. In order to investigate the characteristics of (deep) weathering in this region, northern Langøya and Hadseløya were chosen for in-depth analyses. Eight weathering profiles were excavated from various surfaces, and the stratigraphies were logged in detail. Material was collected throughout the weathering horizons, and all samples were subsequently analysed for clay mineralogy (< 63 μm fraction) and grain size distribution. The sampling strategy was complemented by samples from additional saprolites and other landforms such as moraines and rock glaciers. The XRD results indicate that the presence of secondary minerals, such as gibbsite (Al(OH)₃) and kaolinite (Al₂Si₂O₅(OH)₄), are very common throughout the profiles. Gibbsite is an extreme end product of silicate weathering and usually associated with a warmer and more humid climate, as found in Scandinavia during the Tertiary. The grain size analyses (< 63 μm) show that the finer silt fractions (< 8 μm) tend to be high in the profiles (20–40%), with significant amounts of clay (5–15%) demonstrating that the regolith itself is susceptible to frost sorting mechanisms.¹⁰Be exposure dates from in situ quartz knobs on tors and boulders of local origin suggest > 40,000 years of subaerial conditions. Considering the steady surface erosion, this figure should be viewed as an absolute minimum age estimate. Mapping of the superficial sediments and geomorphological features of the study areas has revealed several common morphological features, which indicate dominance of glacial and periglacial processes in the areas lying below the lower boundary of blockfields (c. 250 m). The weathering mantles are not a periglacial end product, but rather a relict tertiary landform that were modulated by permafrost processes as well as biological processes at later stages. The regolith cover constrain the vertical extension of warm-based Quaternary ice sheets challenging the notion of a parabolic ice mass consuming every mountain top of Lofoten and Vesterålen.  相似文献   

Geomechanical model for fracture deformation under hydraulic, mechanical and thermal loads     

Chris McDermott  Olaf Kolditz 《Hydrogeology Journal》2006,14(4):485-498

Hydraulic flow and transport (heat and solute) within crystalline rocks is dominated by the fracture systems found within them. In situ stress conditions have a significant impact on the hydraulic, mechanical and thermal coupled processes, and quantification of these processes provides a key to understanding the often transient time-dependent behaviour of crystalline rocks. In this paper, a geomechanical model is presented which describes fracture closure as a function of effective stress and the changes in parameters such as storage, permeability, porosity and aperture. Allowing the fracture closure to be defined by the change in normal effective stress provides a link to the numerical consideration of parametrical changes due to rock stress alterations caused for example by changes in fracture fluid pressure, stress release, tectonic stress, thermal stress, orientation of the natural fracture in the pervasive stress system and local changes in a rock mass due to stress alteration. The model uses geometrical considerations based on a fractal distribution of apertures on the fracture surface, and applies well-established analytical elastic deformation solutions to calculate the deformation response to changes in effective stress. Analysis of the fractal generation method allows a standard normal distribution of fracture apertures to be predicted for all common fractal dimensions relating to a 2D surface. Changes in the fracture aperture are related to hydraulic functions such as permeability, storage and porosity of the fracture. The geomechanical model is experimentally validated against laboratory scale experimental data gained from the closure of a fractured sample recovered at a depth of 3,800 m from the KTB pilot borehole. Parameters for matching the experimental data were established externally, the only fitting parameters applied were the minimum and maximum contact area between the surfaces and the number of allowable contacts. The model provides an insight into the key processes determining the closure of a fracture, and can act as a material input function for numerical models linking the effects of changes in the stress field, hydraulic or thermal conditions, to the flow and transport parameters of a fractured system.

---

Résumé L’écoulement et le transport (chaleur et soluté) dans les roches cristallines sont dominés par les systèmes de fracture. Les conditions de stress in-situ ont un impact significatif sur l’hydraulique, les processus couplés de mécanique et thermique et la quantification de ces processus apportent une clé pour comprendre le comportement transitoire des roches cristallines. Dans cet article un modèle géomécanique est présenté, modèle qui décrit la fermeture des fractures comme une fonction de la contrainte effective et des changements de paramètres tels le coefficient d’emmagasinement, la perméabilité, la porosité et l’ouverture. En s’accordant que la fermeture des fractures est définit par les changements de la contrainte effective normale, on apporte le lien avec la considération numérique des changements paramétriques dus aux altérations de la contrainte des roches, causés par exemple par des variations de la pression des fluides dans les fractures, du dégagement de la contrainte, des contraintes tectoniques et thermiques, des orientations des fractures naturelles dans le système de contraintes pénétrantes, et des changements locaux dans un massif de roches dus à l’altération des contraintes. Le modèle utilise des considérations géométriques basées sur une distribution fractale des ouvertures à la surface des fractures, et permet d’établir des solutions analytiques de la déformation élastique pour calculer la réponse de la déformation à la contrainte effective. L’analyse de la méthode par génération fractale permet de prédire une distribution normale standard de l’ouverture des fractures, pour toutes les dimensions fractales en relation avec les surfaces 2D. Les changements dans l’ouverture des fractures sont mis en relation avec les fonctions hydrauliques tels la perméabilité, l’emmagasinement et la porosité de la fracture. Le modèle géoméchanique est expérimentalement validé à l’échelle du laboratoire sur un échantillon fracturé récupéré à une profondeur de 3,800 mètres sur le puits du site pilote KTB. Les paramètres du calibrage des données expérimentales ont été établies extérieurement, les seuls paramètres utilisés étant les surfaces de contact minimum et maximum, et le nombre de contacts permis. Le modèle apporte une connaissance perspicace sur le processus clé déterminant la fermeture des fractures, et peut servir de fonction input dans les modèles numériques reliant les effets des variations de la contrainte du terrain, les conditions hydrauliques ou thermales, les paramètres de l’écoulement et du transport et les systèmes de fracture.

---

Resumen El flujo hidráulico y transporte (de calor y solutos) dentro de rocas cristalinas está dominado por los sistemas de fracturas que se encuentran en ellas. Las condiciones de esfuerzos in-situ tienen un impacto significativo en los procesos aparejados termales, mecánicos e hidráulicos y la cuantificación de estos procesos aporta una clave para entender el frecuente comportamiento transitorio dependiente de las rocas cristalinas. En este artículo se presenta un modelo geomecánico que describe el cierre de fracturas en función del esfuerzo efectivo y los cambios en parámetros tal como almacenamiento, permeabilidad, porosidad y apertura. El definir el cierre de fractura mediante el cambio en esfuerzo normal efectivo aporta un vínculo con la consideración numérica de cambios paramétricos ocasionados por alteraciones de esfuerzos en la roca causadas, por ejemplo, por cambios en presión de fluidos en fractura, liberación de esfuerzo, esfuerzo tectónico, esfuerzo termal, orientación de fracturas naturales en el sistema de esfuerzos penetrante, y cambios locales en una masa rocosa ocasionados por alteración de esfuerzos. El modelo utiliza consideraciones geométricas basadas en la distribución fractal de aperturas en la superficie de fractura y aplica soluciones analíticas bien establecidas de deformación elástica para calcular la respuesta de deformación a cambios en el esfuerzo efectivo. Los análisis del método de generación fractal permiten predecir una distribución normal standard para la distribución de aperturas de fracturas para todas las dimensiones fractales comunes que se relacionan con una superficie 2D. Los cambios en la apertura de fractura se relacionan con funciones hidráulicas tal como permeabilidad, almacenamiento y porosidad de la fractura. El modelo geomecánico se ha validado experimentalmente en contra de datos experimentales a escala de laboratorio obtenidos a partir del cierre de una muestra fracturada recuperada a una profundidad de 3,800 m en el pozo piloto KTB. Se establecieron externamente parámetros que se ajustan a los datos experimentales, con los parámetros de ajuste aplicados que fueron el área máxima y mínima de contacto entre las superficies y el número de contactos permisibles. El modelo arroja luz sobre los procesos clave que determinan el cierre de una fractura y puede actuar como un material de función de entrada para modelos numéricos que vinculan los efectos de cambios en el campo de esfuerzos, condiciones termales o hidráulicas, con los parámetros de flujo y transporte de un sistema fracturado.

  相似文献   

A revised age of ad 667–699 for the latest major eruption at Rabaul     

Chris O. McKee  Michael G. Baillie  Paula J. Reimer 《Bulletin of Volcanology》2015,77(7):1-7

  相似文献